Description
Wired proximity sensor activated magnetically. Case dimensions - 12 x 63 mm.
Communication with Arduino
To verify that the functionality of the sensor, use the attached to the Arduino program - DigitalInputPullup, which is in the menu: File -> Examples -> Digital. It is sufficient to connect one sensor's wire to ground GND, the other to the pin No. 2 of Arduino, and when bringing together both parts of the sensor, the built-in L led connected to pin 13, will light up.
Specification
- The size of reed switch: 12 x 63 mm
- Reed switch thickness: 13 mm
- The dimensions of the magnet: 12 x 63 mm
- The thickness of magnet[mm]: 13
- Cable length: 25 cm
- Included are 4 screws
