Gravity - 9DOF sensor BMX160 + temperature and pressure sensor BMP388 - I2C- DFRobot SEN0252

Index: DFR-15712 EAN: 6959420915767

The module is equipped with two BMX160 and BMP388 sensors. BMX160 is a 9-axis sensor which allows to measure the acceleration in the ranges ± 2 g / ± 4 g / ± 8 g / ± 16 g and the angular position (gyroscope) in the ranges from 125°/s to 2000°, while BMP388 is responsible for measuring temperature from 0°C to 65°C and atmospheric pressure from 300 hPa to 1250 hPa.

Gravity - 9DOF sensor BMX160 + temperature and pressure sensor BMP388 - I2C- DFRobot SEN0252
€21.90
€17.80 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino

Description: Gravity - sensor 9DOF BMX160 + temperature and pressure sensor BMP388 - I2C - DFRobot SEN0252.

The module is equipped with two BMX160and BMP388sensors. BMX160 is a 9-axis sensor which allows to measure the acceleration in the ranges ± 2 g / ± 4 g / ± 8 g / ± 16 g and the angular position (gyroscope) in the ranges from 125°/s to 2000°, while BMP388 is responsible for measuring temperature from 0°C to 65°C and atmospheric pressure from 300 hPa to 1250 hPa.

Czujnik BMX160 i BMP388Module with sensors BMX160 and BMP388 - Grove cable and goldpin strips are also included.

The board is equipped with a Gravity connector, which makes it possible to connect it to the base plate in an easy way. Current demand is less than 1.5 mA. The module with this combination of sensors will be used in dronesandapplications for height, position and orientation measurement.

Arduino compatible product

The manufacturer has prepared auser guide forRaspberry Pi users.

Module outputs

The module is equipped with a Gravity connector. For communication with the base board it uses the I2C interface.

Czujnik BMX160 oraz BMP388

Pin Description
VCC / + Supply voltage 5 V.
GND / - The weight of the system.
SCL / C I2C bus clock line.
SDA / D I2C bus data line.
3V3 Power supply 3.3 V.
ADDR(BMP388) Select I2C address for BMP388.
ADDR(BMX160) Select I2C address for BMX160.
CSB2 Pin selection of BMX160 protocol.
INIT2 External interrupt 1 for BMX160.
INIT3 External interruption 2 for BMX160.
CSB1 Pin selector of BMP388 protocol.
INIT1 External interruption for BMP388.

Main module features

  • Low power consumption
  • High measuring accuracy
  • Small in size
  • Measurement of acceleration
  • Angle position measurement
  • Pressure and temperature measurement

Sensor module specification

  • Supply voltage 5 V or 3.3 V
  • Communication: I2C
  • BMX160 sensor
    • accelerometer: ± 2g / ± 4 g / ± 8 g / ± 16 g
    • Gyroscope: 125°/sec to 2000°/sec
    • Geomagnetic sensor: ± 1150uT (x-,y axis); ± 2500 uT (z axis)
    • resolution: 0.3 uT
  • Sensor BMP388
    • pressure: 300 hPa to 1250 hPa
    • Relative pressure measurement accuracy: ± 0.08 hPa (at ± 0.66m height, 700-900hPa and 25℃-40℃)
    • absolute pressure measurement accuracy: ± 0.5 hPa (at 0℃-65℃ and300-1100hPa)
    • temperature: from 0°C to 65°C
    • temperature measurement accuracy: ± 0.5℃
  • Operating temperature: -40°C to 80°C
  • Dimensions: 32 x 27 mm

Sensor - type IMU
Sensor - Temperature to 65 °C
Sensor - Temperature accuracy +/- 0.5 °C
Sensor - Temperature from 0 °C - 70 °C
Package width 5.6 cm
Package height 6 cm
Package depth 2.5 cm
Package weight 0.015 kg

Be the first to ask a question about this product!

Product reviews

Gravity - 9DOF sensor BMX160 + temperature and pressure sensor BMP388 - I2C- DFRobot SEN0252

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Volodymyr 12.10.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: