The mechanics becomes more and more sophisticated. Both amateurs and fans as well as experienced professionals today use sensors and advanced software and drivers to communicate with machines. However, mounting elements or drives and wheels are also important, as they are the second group of key elements for design success. Mechanical parts have to be selected with regard to a specific project, so we first make a plan and only then we complete all necessary elements. We must consider all parameters, design requirements and our individual expectations. In our offer you will find everything you need to build a complete set of mechanical parts needed for your project. These include, of course, drive wheels and drives, as well as complete assembly kits and individual parts, which in turn are responsible for a solid construction and resistance to any mechanical damage.
ROBOTS AND MECHANICS
Servo Hitec HS-485HB Deluxe - standard
Strong standard servo with karbonite gears with increased strength. Speed: 0,18 sec/60 ° . Torque: 6 kg. Dimensions: 39 x 20 x 38 mm. Weight: 45 gr.- Reduced price
- Promotion
Aluminum servo horn Feetech FK-AP-18 - 18mm / 6mm
Aluminium servo horn made by company Feetech, length of 1.9 cm and a diameter of the mounting hole is 6 mm. It has a shoulder in black. It works with standard servos.Aluminum servo horn PowerHD Arm D 35mm / 6mm
Aluminium PowerHD black servo barrel, dimensions 35 x 15 x 5 mm . The mounting hole has a diameter of 6 mm, number of teeth is 25T. It has two screws for adjustment....Linear Actuator LA10P 500N 13mm/s 12V with potentiometer - stroke 10cm
12 V electric actuator with potentiometer . Extension is 10 cm and maximum load capacity 500 N . The actuator operates at 13 mm/sec. It has a protection class IP65.Ball Caster 3/4" - plastic - Pololu 954
Lightweight plastic ball with a 0.75 inch diameter canopy. Perfect for supporting the front of a two-wheeled robot.Aluminum servo horn Feetech FK-AP-7 - 25mm / 6mm - orange
Aluminium servo horn made by company Feetech, length of 2.5 cm and a diameter of the mounting hole is 6 mm. It has one screw for adjustment. It works with standard servos.HP Motor with 10:1 Gear - doublesided shaft - - Pololu 2211
A miniature high-power motor by Pololu with a 10: 1 gearbox, has 3000 rpm, the torque is 0.3 kg * cm (0.029 Nm). It has an extended shaft that allows the installation of speed...Stepper Motor JK42HS48-1684 200 steps 2,8V/1,68A/0,43Nm
Bipolar stepper motor , four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). Powered by 2.8 V, draws 1680 mA per coil. Torque is 4.4 kg*cm (0.43 Nm)....- Reduced price
- Promotion
- Reduced price
- Promotion
Servo Feetech FS5106B - standard 0-200 degrees
Standard servo. The power voltage from 4.8 V to 6 V. Operates in the range from 0 to 200 degrees. Speed: 0.16 s/60°. Torque: 6 kgf*cm Dimensions: 40.8 x to 20.1 x 38.0...NEMA 51- L-type Step Motor Mount - 130x130mm
The mounting is for stepper motor sizes according to NEMA 51 standard. The mounting has mounting holes for most 130 x 130 mm motors. To mount the motor you will need mounting...- On sale!
- Promotion
Servo Feetech FS5113M - standard 0 -180 degrees
Analogue standard servo. It works from 0 to 180 °. It is powered from 4.8 to 6 V . The product has a metal gearbox.Linear Actuator LD1 6,4N 150mm/s 12V - 10cm stroke
Electric actuator with 6.4 N (0.64 kg) lifting capacity, operating at 150 mm/sec. The unit is powered by 12 V. It has a protection class IP54. Thanks to the use of metal...Linear Actuator LA10 500N 13mm/s 12V - 10cm stroke
Electric linear actuator with 500 N (50 kg) lifting capacity . Powered by 12 V. The actuator's extension is 10 cm. It operates at 13 mm/sec. The device has a protection...Standard Servo Mount - Pololu 3435
Plastic mount for standard servos, provides a convenient mount for servos on a flat surface. Mount in black.- Reduced price
- Promotion
Servo Hitec HS-322HD - standard
Effective servo made by company Hitec, has karbonite gears with increased strength. Speed: 0.15 s/60°. Torque: 3.7 kg*cm. Dimensions: 41 x 20 x 37 mm. Weight: 43 gr.- Reduced price
- Promotion
Linear Actuator LA10 500N 13mm/s 12V - stroke 5cm
Linear actuator with a maximum load capacity of 50 kg (500 N) and 5 cm extension. It is powered by 12 V . It has a protection class of IP65. The actuator has two built-in...Extended Hexagonal Wheel Adapter - 12mm/6mm - 2pcs. - Pololu 2687
Aluminum adapter converting the 12 mm, hexagonal shaft suitable for different wheels, for 6 mm motor's shaft. The length of the adapter is equal to 35 mm.See also
Mechanical components and drives
Automation of a robot or other device is not the only area that should be considered when planning a project. Mechanical components have an equally important function, but due to the rapid development of robotics and automation became somewhat overshadowed. However, it is difficult to imagine a mobile robot without driving wheels, especially if it is to move in difficult terrain. Wheels are not a universal product. They are available in various variants, such as classic rubber wheels or smooth wheels, which are perfect for racing robots. We also offer polyurethane wheels with above-average adhesion to the ground. You can also opt for components designed to create a caterpillar chassis. This is a highly advanced special task robot that can handle the toughest conditions and demanding terrain. Have you heard of holonomous robots? They are equipped with omni wheel types that allow them to move in all directions without having to change the position of the whole robot structure.
All wheels need a drive without which they cannot move. The drive unit is of course a motor, which can be a stepper motor, BLDC or DC. Rotary drives, linear actuators and vibrating motors are also available. If you are planning a small hydraulic system, you will need miniature pumps. You want excellent torque. Choose a motor with gearbox. For small models and low-demanding projects we recommend a micro servo. More robust servos have bearing gears and will be suitable for more technologically advanced robots.
How to bring all elements together?
To create a robot, you need not only a smart system and individual components, but also assembly parts that combine them all into one complete unit. There is a wide range of grippers and pan/tilt designs in the shop, as well as several types of engine mountings. You will also find ready-made chassis, which will allow you to significantly reduce the time of the project and minimize the risk of error. You will also find a variety of joints, including screws, nuts and pads. If you're building a flying robot, don't forget about adapters and propellers. Would you like to build your own propulsion gear? Then use our range of gears, pulley components and, of course, gears. We offer a wide range of mounting elements, without which no robot or machine will be built. The stability of the structure depends on them, but also to a significant extent on their purpose and adaptation to specific conditions, which is particularly important if the robot is to move in difficult terrain or even be a flying unit, such as a self-built drone. So have a look at our shop, where a wide range of assembly parts and other mechanical components are available.