- New
- New
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
ROBOTS AND MECHANICS - Strona 3
Loading...
Standard Servo Mount - Pololu 3435
Plastic mount for standard servos, provides a convenient mount for servos on a flat surface. Mount in black.
Index: PLL-12987
Index: PLL-12987
Chassis Rectangle 2WD 2-wheel robot chassis with DC Motor Drive
Transparent, universal platform, allowing you to build a robot, for example, to track a line (line follower) or fighting (sumo). For control, you can use any controller,...
Index: ROB-07283
Index: ROB-07283
Servo Feetech FS5113M - standard 0 -180 degrees
Analogue standard servo. It works from 0 to 180 °. It is powered from 4.8 to 6 V . The product has a metal gearbox.
Index: FTC-16467
Index: FTC-16467
Motor with 1:48 Gear 6V 280RPM - block Lego - 2pcs.
A set of two engines with the possibility of combining with Lego blocks. Motors with 1:48 gearbox. A single shaft turns at a speed of up to approx. 280 rpm on a 6-volt supply,...
Index: DNG-13668
Index: DNG-13668
Micro motor N20-BT02 5:1 4000RPM - 12V
N20 series miniature motor with 5:1 gearing , has 4000 RPM , torque is 0.1 kg*cm (0.0098 Nm). The supply voltage is from 3V to 12V .
Index: DNG-12542
Index: DNG-12542
Aluminum gear with 10 teeth . Diameter: 19 mm , height: 23 mm , hole diameter: 6 mm .
Index: GRL-12574
Index: GRL-12574
- Reduced price
- SPECIAL OFFERS
HPCB Motor with 298:1 Gear - doublesided shaft - Pololu 3079
Polol' s miniature high power engine with durable carbon brushes. It has a 298:1 gearbox, speed is 100 rpm , and torque is 5.0 kg*cm (0.49 Nm). It has an extended shaft...
Index: PLL-05096
Index: PLL-05096
Double Hanging Pulley - 9x19mm
Double, pendant, metal pulley with the width of 9 mm and a diameter of 19 mm. The wheel can rotate 360 °. The sizes of the whole is: 58 x 29 x 26 mm.
Index: GRL-12514
Index: GRL-12514
- Sale
- SPECIAL OFFERS
Unipolar stepper motor, six wire. It has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 4 V and draws 1200 mA current per coil. The torque is 3.17...
Index: MOT-06423
Index: MOT-06423
Unipolar stepper motor, six wire. It has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 6 V and draws 800 mA current per coil. The torque is 2.6 kg*cm...
Index: MOT-06428
Index: MOT-06428
Aluminum gear with 12 teeth. Diameter: 22 mm, height: 23 mm, hole diameter: 5 mm.
Index: GRL-13767
Index: GRL-13767
Servo PowerHD LW-25MG - standard waterproof
Waterproof digital standard servo with DC motor and ball bearings. It is supplied with the voltage of 7.4 V and has a torque of 25 kg*cm. Speed: 0.14 sec/60° Torque: 25...
Index: PHD-13299
Index: PHD-13299
Romi - Power Module for Romi Chassis - Pololu 3541
The power module is designed for Romi Chassis. It facilitates the use of energy of the battery for the rest of the elements. It has a power switch, a few power supply options,...
Index: PLL-07349
Index: PLL-07349
- Sale
- SPECIAL OFFERS
Micro motor N20-BT39 1000:1 32RPM - 9V
The N20 series miniature motor with 1000:1 gearing, has 32 RPM, torque is 9 kg*cm (0.883 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12601
Index: DNG-12601
Hanging single Pulley - 7x14mm
Double, pendant, metal pulley with the width of 7 mm and a diameter of 14 mm. The Wheel can rotate 360 °. Dimensions of the whole: 44 x 14 x 13 mm.
Index: GRL-12573
Index: GRL-12573
Aluminum servo horn Feetech FK-AP-5 - 30mm / 6mm
Aluminium servo horn made by company Feetech, length of 3 cm and a diameter of the mounting hole is 6 mm. It has one screw for adjustment. It works with standard servos.
Index: FTC-09186
Index: FTC-09186
- Sale
- SPECIAL OFFERS
Servo Feetech Wing FT3325M - metal - micro
Servo type micro. The power voltage from 4.8 V to 6 V. Speed: 0.13 sec/60°. Torque: 7,21 kg*cm Dimensions: 30,0 x 10,0 x 35.5 mm Weight: 26.2 g
Index: FTC-10310
Index: FTC-10310
Micro motor N20-BT11 5:1 3000RPM - 9V
The N20 series miniature motor with 5:1 gearing, has 3000 RPM , torque is 0.1 kg*cm (0.01 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12550
Index: DNG-12550
HPCB Motor with 1000:1 Gear - doublesided shaft - Pololu 3080
Polol' s miniature high power engine with durable carbon brushes. It has a 1000:1 gearbox, speed is 32 rpm , and torque is 9.0 kg*cm (0.89 Nm). It has an extended shaft...
Index: PLL-05100
Index: PLL-05100
- Reduced price
- SPECIAL OFFERS
25Dx54L motor with 75:1 Gear 6V 75RPM - Pololu 1586
Polol's 75:1 gearing motor generates 75 rpm, torque is 6.12 kg*cm (0.6 Nm). Powered by 6 V, the average current consumption is approximately 80 mA (max 2200 mA).
Index: PLL-01926
Index: PLL-01926
Micro motor N20-BT17 50:1 250RPM - 9V
The N20 series miniature motor with 50:1 gearing, has 250 RPM, torque is 0.5 kg*cm (0.049 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12556
Index: DNG-12556
Linear Actuator LA50P 7000N 5mm/s 12V with potentiometer - stroke 5cm
12 V linear actuator with built-in potentiometer . The unit has a 50 mm extension and a maximum load of 700 kg (7000 N) . The LA50P has an IP65 rating, which means it can be...
Index: WLS-17104
Index: WLS-17104
- Reduced price
- SPECIAL OFFERS
Stepper Motor 39BYGL215A with threaded shaft 12V/ 0.4A/ 0.20Nm - SparkFun ROB-10848
Bipolar stepper motor, four-wire. It has a threaded shaft, which allows the device to be used as a linear actuator. It is powered by 12 V and draws 0.4 A per coil. The holding...
Index: SPF-02111
Index: SPF-02111
- Sale
- SPECIAL OFFERS
Mounting plate for systems based on V-Slot profiles. Thanks to its versatility we can use it even for the widest profiles in our offer. It allows for the assembly of rollers...
Index: VST-17343
Index: VST-17343