Do you prototype? Do you develop projects in the field of electronic devices? Are you a do-it-yourselfer who experiments with systems to make your everyday life and certain activities easier? Excellent, in that case you should be interested in Gravity system, which was created by DFRobot team. It works well in systems that are used, for example, in intelligent robots, systems designed to monitor environmental parameters or building automation systems. Gravity has a modular structure and comes in many variants, so you can easily adapt it to your project, goals and individual needs. The available solutions include flow meters, pH meters and gas sensors. Check our offer of Gravity systems and carry out your challenging project. Make the most of your potential and the possibilities available in the area of advanced technology, which is still evolving and offers new and even more surprising solutions.
- New
- Reduced price
- Promotion
Velleman VMP501 prototype KIT for Raspberry Pi 4B/3B+/3B/2B/Zero
Index: VEL-10722
- Reduced price
- Promotion
Plastic case for power supply Kradex Z31 - 120x70x44mm black
Index: KDX-06972
- Reduced price
- Promotion
Arduino Portenta Vision Shield - Ethernet - shield with camera
Index: ARD-18428
- Reduced price
- Promotion
- Reduced price
- Promotion
Gravity series for Arduino
Loading...
DFRobot Gravity - BME280 humidity, temperature and pressure sensor 110kPa I2C / SPI 3-5V
The DFRobot module is equipped with a sensor of humidity, temperature and pressure, powered with the voltage from 3.3 V to 5 V with the I2C and SPI interface. Measuring range:...
Index: DFR-09384
Index: DFR-09384
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Analog TDS sensor compatible with Arduino, it is used for measuring the hardness and the purity of water. It can be used to test the quality of water in households, hydroponic...
Index: DFR-10830
Index: DFR-10830
Gravity: MOSFET Power Controller 5-36V/20A
A switch that allows you to control a device requiring a large current by using a microcontroller. The module works with voltage from 5 V to 36 V with the current consumption...
Index: DFR-08104
Index: DFR-08104
DFRobot Gravity v2.1.0 - I2C Digital Wattmeter
A module that allows you to measure electric energy consumption of up to 26 V / 8 A. The maximum measurement error is approx. 0,2%. It communicates through an I2C interface. It...
Index: DFR-13753
Index: DFR-13753
Gravity - I2C hub splitter - 8 ports - DFRobot DFR0759
I2C hub splitter allows to connect several modules and peripherals to one I2C connector. Thanks to DFR0759 hub you have possibility to connect up to 8 Gravity series...
Index: DFR-19018
Index: DFR-19018
DFRobot Gravity - analog soil moisture sensor - corrosion resistant - SEN0193
The device is used to measure soil moisture by the capacitive detection. It has a built-in voltage regulator which provides an operating voltage range from 3.3 V to 5 V. It is...
Index: DFR-10305
Index: DFR-10305
DFRobot Gravity - pH analog sensor/meter
Analog pH meter with an analgue output. Allows to measure water quality. It has an accuracy of +/- 0.1 pH, which is sufficient for most applications. Equipped with LED, BNC...
Index: DFR-05874
Index: DFR-05874
DFRobot Gravity - analogue turbidity sensor
Sensor for testing the quality of water by measuring its turbidity. Operates at 5 volts at temperatures from -30°C to 80°C.
Index: DFR-05318
Index: DFR-05318
Gravity - Analog Waterproof Capacitive Soil Moisture Sensor V2.0 - DFRobot SEN0308
The device is designed to measure soil moisture by means of capacitive detection. DFRobot product has increased water resistance . It can be placed in the soil for a long...
Index: DFR-17377
Index: DFR-17377
DFRobot Gravity: Analog AC Current Sensor SCT 013-020 - to 20A
The sensor measures the intensity of the current flowing in a pipeline without its opening. Measurement occurs through the insulation on a single wire, and the output is the...
Index: DFR-06932
Index: DFR-06932
DFRobot Gravity - capacitive touch sensor
Capacitive touch sensor uses a digital interface to work. It can be powered with the voltage from 3.3 V to 5 V. It feels the human or metak touch, even through a fabric or paper.
Index: DFR-11264
Index: DFR-11264
DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...
Index: DFR-11286
Index: DFR-11286
Disposable ECG Electrodes Pack (12 pcs)
Disposable EKG electrodes designed for heart examination and other biomedical measurements. The set consists of 12 self-adhesive sensors of breathable fabric and foam with...
Index: DFR-07922
Index: DFR-07922
DFRobot Gravity - a speaker with a digital interface
The module is based on the single-wire 8002 amplifier with digital interface. It can work as a simple buzzer or play music. The volume is adjustable with built in...
Index: DFR-05501
Index: DFR-05501
DFRobot Gravity - digital sound generator - buzzer
Digital buzzer module for Arduino and Raspberry Pi, which can be controlled via low and high status. When changing the frequencies of the buzzer, you can hear a different...
Index: DFR-11263
Index: DFR-11263
Gravity - BMI160 6DoF IMU - 3-axis accelerometer and gyroscope - DFRobot SEN0250
A 6-axis inertial motion sensor featuring the Bosch BMI160 MEMS chip. The module integrates a 16-bit 3-axis accelerometer and a 3-axis gyroscope . It is used to measure...
Index: DFR-19380
Index: DFR-19380
DFRobot Gravity - sound sensor - analog
Sound sensor module with analog output. Works with a supply voltage from 3.3 V to 5 V. It enables the determination of the volume or identifying characteristic sounds from the...
Index: DFR-03172
Index: DFR-03172
DFRobot Gravity: Non-contact Liquid Level Sensor
The sensor determines the liquid level without dipping into the liquid. Due to the lack of contact with the liquid, the module is suitable for level measurement of hazardous...
Index: DFR-06931
Index: DFR-06931
DFRobot Gravity – Lightning Sensor
The module is equipped with the AMS AS3935 Franklin system and a special antenna Coilcraft MA5532-AE for determining the distance from atmospheric discharges, intensity and...
Index: DFR-13752
Index: DFR-13752
DFRobot Gravity - voltage divider 1/5
A voltage divider is used, when the measured voltage has a larger value than the range of A/D converter. The device works in the range from 0,0245 V to 25 V. The output...
Index: DFR-11261
Index: DFR-11261
DFRobot Gravity - digital button Tact Switch - yellow
Digital monostable switch with 3-pin connector . It is powered from 3.3V to 5V and works with Arduino modules.
Index: DFR-11279
Index: DFR-11279
A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04279
Index: DFR-04279
DFRobot Gravity - Hall magnetic field sensor
The magnetic field sensor with digital output OH9249. It is supplied with the voltage of from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04714
Index: DFR-04714
Gravity series – functionality and possibilities
This category includes both basic (e.g. temperature or liquid level sensors in the tank) and advanced modules (e.g. memory expansion modules or Hall magnetic field sensors). Thanks to them, you will not only increase the capabilities of your platform and increase its level of computing power, but also create wonderful structures characterized by perfect and efficient operation. It is worth using your skills and experience to solve the problems of others, e.g. by designing structures based on human heart rate sensors.
Arduino gravity sensors are just tools that provide you with wonderful possibilities. However, everything depends on your creativity, imagination and goals. If you need help completing your order, we will be happy to help you assemble the appropriate set.
How to use the potential of DFRobot Gravity
Automation of simple activities and systems that relieve us of our duties are almost standard for which Gravity sensors are used. Although it may seem that humidity, temperature or even soil pH sensors will be useful in home gardens and weather stations, they are often able to improve the operation of large farms. Growers can constantly monitor soil parameters, weather or surroundings, intervening when necessary.
Gravity Arduino is also perfect for private facilities, office buildings, production halls and warehouses. Gas or temperature sensors can indicate failures or problems, informing people in the room or the immediate vicinity that an irregularity has occurred that may turn out to be a threat.
The more elements and sensors that make up the protection system, the safer your property or company is.