3D printer - Creality K1

Index: CRL-22977 EAN: 6971636407010
Super-fast 3D printer with a closed working chamber from Creality. The printing speed of the device in some cases can reach as much as 600 mm / s ! The improved Z axis with more accurate positioning ensures a uniform texture of the finished model. The dimensions of the working area of the printer are 220 x 220 x 250 mm. The entire structure measures 355 x 355 x 480 mm.
3D printer - Creality K1
€539.00
€438.21 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Creality

Product description: 3D printer - Creality K1

Super-fast 3D printer with a closed working chamber from Creality. The printing speed of the device in some cases can reach as much as 600 mm / s ! However, the typical speed for the printer is 300 mm/s. The improved Z axis with more accurate positioning ensures a uniform texture of the finished model. The dimensions of the working area of the printer are 220 x 220 x 250 mm. The whole structure has dimensions of 355 x 355 x 480 mm, so you can easily place it on a desk or table. Creality K1 can support LiDAR sensor and AI camera, but they need to be purchased separately.

3D printer - Creality K1.

The G-sensor reduces vibration, resulting in smoother prints.

Amazing speed

With an acceleration of 20,000 mm/s², the Creality K1 can reach speeds of up to 600 mm/s in just 0.03 seconds! This is one of the highest scores among FDM 3D printers. According to research by Creality Lab, it took only 13 minutes to print the popular Benchy test model.

G sensor

To eliminate the ringing effect during fast operation of the printer, it has been equipped with a G-sensor that measures resonance frequencies and automatically reduces them if they are too high. Thanks to this, the K1 can also print at night, without disturbing your peace.

Dual Gear Direct Drive Extruder

The modernized two-speed extruder with direct drive provides an extrusion force of 50 N. Thanks to this, the filament is fed smoothly. The light construction of the head, weighing only 190 g, is a guarantee of fast and agile movements.

Hotend with a flow of 32 mm3 /s

The K1 printer hotend is equipped with a new ceramic heater . It heats up to 200°C in just 40 seconds and melts the filament instantly. Titanium alloy thermal break and copper nozzle can operate at temperatures up to 300°C.

The Creality K1 has a two-speed direct drive extruder.

The printer's cooling system ensures the highest quality of printouts.

Hands-free leveling

The printer has the function of fully automatic leveling of the working table using grids of stress sensors built into the table. They guarantee the highest precision in adjusting the platform. The leveling process runs automatically each time you start printing.

Effective cooling

There is a fan on the print head that generates a strong air stream that quickly cools and hardens the model. The cooling effect is enhanced by an additional fan in the working chamber with a power of 18 W. This eliminates any warping and deformation caused by overheating.

One-click error detection

K1 will perform a self-test of functionality, e.g. extruder, heatbed, fans or leveling system and will display any anomalies on the screen if necessary. Thanks to this, you can quickly detect errors before printing begins .

Convenient controls

Creality K1 can print from USB drive or WiFi. Thanks to the network connection, the printer can be controlled and monitored remotely via the Creality Print app or Creality Cloud . The K1 uses the newly developed Creality Print 4.3 slicer, which streamlines the cutting process and reduces it to 3 simple steps. Please note that the printer needs an AI camera for remote monitoring, which is not included.

Monitor the work of your printer as you like.

The printer uses Core XY kinematics.

Other features of the Creality K1 printer

  • Fully assembled, calibrated and ready to use right out of the box
  • One-piece frame made of aluminum alloy and CNC machined
  • Core XY kinematics
  • 1.2GHz dual-core processor 8GB ROM
  • 4.3-inch touchscreen display with user-friendly interface
  • Heated bed reaching 60°C in 180 seconds
  • Flexible working platform with a rough, matt surface
  • Resume printing after a power outage
  • Filament end sensor that stops printing when the filament runs out
TECHNICAL SPECIFICATIONS
Printing method: FDM
Print Size: 220 x 220 x 250 mm
Nozzle temperature: up to 300°C
Table temperature: up to 100°C
Nozzle diameter: standard: 0.4 mm (alternative: 0.6 mm and 0.8 mm)
Print Accuracy: ±0.1 mm
Print Thickness: from 0.1 mm to 0.35 mm
Printing speed: up to 600 mm/sec
Acceleration: up to 20 000 mm/s2
Supported filament: PLA, PETG, PET, ABS, PA, ASA, PC, TPU, PLA-CF, PA-CF, PET-CF
Filament Diameter: 1.75 mm
Display: touchscreen, 4.3"
Software: Creality Print, Cura, Simplify3D, PrusaSlicer
Operating mode: USB drive, WiFi
File Format: STL, OBJ, AMF
Supply voltage: 100 V to 240 V, 200 V to 240 V
Rated Power: 350 W
Printer dimensions: 355 x 355 x 480 mm
Mass: 12.5 kg

3D - print surface 220x220x250mm
3D - type of printout FFF/FDM
3D - accuracy of printing 0.1 mm
3D - hotend amount 1
3D - filament diameter 1.75 mm
3D - printing speed 600 mm/s
3D - printing thickness 0.1 - 0.35 mm
3D - nozzle temp 300 °C
Package width 42 cm
Package height 55.5 cm
Package depth 42 cm
Package weight 15.3 kg

Michał

06/20/23

Question: Good day, I would like to ask what is the volume of this printer during operation. I'm especially interested in comparing it to the CR200B model.
Answer: If we talk about the operation of the motors themselves, then the printer runs very quietly. I think even quieter than the CR-200B, but the operation of the printer is not just down to the motors, because there is still the issue of fans.
In the case of the K1 printer and the activation of all available fans, the printer begins to work quite loudly - is it tolerable? This is rather a highly individual issue, we have one piece that works all the time in the office of our technical department and the noise generated is not that bothersome (but as I mentioned these are only our feelings). Of course, we are talking about the situation when the printer does not have the top cover on, at the moment when the printer has the door closed and the top cover on, the noise is no longer so audible and can be compared to other printers from this manufacturer.

Product reviews

3D printer - Creality K1

4.9/5

Average grade

18

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Krzysztof 07.03.2024 Confirmed purchase Translated review
I always like to buy from you for this reason. For the speed and prices.
Robert 01.02.2024 Confirmed purchase Translated review
Fast, efficient and to the point
Jan 08.01.2024 Confirmed purchase Translated review
The printer is currently working as it should. It is fast and prints well. I am satisfied.
Angelika 30.12.2023 Confirmed purchase Translated review
The printer is highly recommendable.
Fuzzland 21.12.2023 Confirmed purchase Translated review
Great printer.
Tomasz 21.12.2023 Confirmed purchase Translated review
The service was impeccable - the parcel arrived quickly. The printer itself looks very nice at first glance!
Magdalena 12.12.2023 Confirmed purchase Translated review
It's been a week since I received the Creality K1 printer from Botland. The printer itself is fantastic and its startup is a breeze. The service from the Botland store is at the highest level - I recommend it 100%.
Ryszard 10.11.2023 Confirmed purchase Translated review
The printer was delivered in perfect condition. The first prints confirm that my choice was good. The only deficiency is the lack of Polish language.
Przemysław 11.10.2023 Confirmed purchase Translated review
Great equipment
Marek 09.10.2023 Confirmed purchase Translated review
The printer is very fast and very precise. The side fan is noisy, but the print quality is perfect - especially for this price
Kasjan 31.07.2023 Confirmed purchase Translated review
Great equipment, I definitely recommend the end of playing and nervous with table calibration, besides it is super fast
Dariusz 09.04.2024 Confirmed purchase
Paweł 01.04.2024 Confirmed purchase
Marta 03.01.2024 Confirmed purchase
Stanisław 11.12.2023 Confirmed purchase
Kamil 23.10.2023 Confirmed purchase
Kamil 27.09.2023 Confirmed purchase
Grzegorz 25.06.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: