Filter by

Price
0 56
Manufacturers
more (431) ok clear
Filter

Promotion products

Recomendations

Cooling

Products: 103
Loading...

Heat sink with thermoconductive tape for NanoPi NEO

Radiator with thermoconductive tape and mounting screws dedicated for minicomputer NanoPi Neo 256 MB of RAM and NanoPi Neo 512 MB of RAM.
Index: NNP-07030
Index: NNP-07030
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.53 Price €3.53

Peltier cell TEC1-12706 12V/6A

The chilling cell used, for example, in portable refrigerators. It's supplied with the voltage of up to 12 V, it consumes up to 6 A current. Board sizes - 40 x 40 x 4 mm.
Index: MOD-02613
Index: MOD-02613
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.35 Price €3.35

Set of heat sinks for Raspberry Pi - black with heat transfer tape - 3pcs.

Set of black heat sinks in 3 pieces. They have different sizes, at the back there is a double-sided, thermally conductive tape. They are compatible with Raspberry Pi 4...
Index: DNG-15211
Index: DNG-15211
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €0.83 Price €0.83

Set of heat sinks 2x with thermoconductive tape - black

Set includes two  heat sinks  in sizes: 14x14mm and 9x8mm. The kit also includes a thermo-conductive tape. They can be used to cool the system of a minicomputer Raspberry Pi...
Index: MOD-09871
Index: MOD-09871
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.79 Price €0.79

Heat sink RAD21 35x35x10mm

Heat sink with the size of  35 x 35 x 10 mm.
Index: ETN-04844
Index: ETN-04844
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.74 Price €0.74

Copper heatsink set for Raspberry Pi 3/2/B+/Zero - 8pieces

The set includes two copper heatsinks, which can cool the  minicomputer Raspberry Pi 3 B, 2 B, B+ and Zero. They are suitable for chips located on the board and emit the...
Index: DNG-10048
Index: DNG-10048
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.93 Price €4.93

Fan 5V 30x30x8 mm for Raspberry Pi case

Low-noise 30 x 30 mm fan for Raspberry Pi. It is equipped with a two-pin GPIO raspberry fan. The fan features a slim design - 8 mm and low noise level. Screws and mounting nuts...
Index: LON-15170
Index: LON-15170
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €1.33 Price €1.33

Fan 5V 25x25x10mm 2 wires

The fan on the input voltage of 5 V, current consumption at 150 mA and dimensions of 25 x 25 x 10 mm.
Index: MOT-09464
Index: MOT-09464
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.63 Price €2.63

Set of heat sinks for Raspberry Pi - silver with heat transfer tape - 3pcs.

Set of 3 pieces of silver heat sinks, which are 9 x 9 mm, 14 x 9 mm, 14 x 14 mm. At the back there is a double-sided, thermally conductive tape. They are compatible with...
Index: DNG-15212
Index: DNG-15212
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €0.83 Price €0.83

Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - black

The 40 x 30 x 5 mm black heat sink is compatible with the Raspberry Pi 4 minicomputer, as well as with other electronic circuits. It has a self-adhesive layer of double-sided...
Index: ODS-15380
Index: ODS-15380
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €0.88 Price €0.88

Fan 5V 30x30x10mm 2 wires

The fan with the input voltage of 5 V, current consumption of the 150 mA and dimensions of 30 x 30 x 10 mm.
Index: MOD-09872
Index: MOD-09872
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.24 Price €2.24

Peltier TEC1-12704

The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 4 A of current. Board sizes - 40 x 40 x 4 mm.
Index: DNG-10019
Index: DNG-10019
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.48 Price €4.48

Fan 12V 40x40x10mm 3 wires

The fan with the input voltage of 12 V, current consumption of the 120 mA, and dimensions of 40 x 40 x 10 mm.
Index: MOT-09439
Index: MOT-09439
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.78 Price €1.78

Heatsink with a 92mm fan for the Peltier 40mm cell

The heatsink with fan 92 x 92 mm, designed to dissipate heat from the peltier cell 40 mm. included is also the thermal conductive paste and mounting screws.
Index: DNG-10024
Index: DNG-10024
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.53 Price €6.53

Peltier Cell TEC1-12715 12V / 12A

The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 11. 8 A of current. Board sizes - 40 x 40 x 3.3...
Index: DNG-10022
Index: DNG-10022
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.73 Price €6.73

Fan 5V 30x30x10 mm for Raspberry Pi case

A small 5-volt fan for the Raspberry Pi chassis. It is equipped with a two-pin connector to connect with GPIO Raspberry Pi. It has a low noise level. The fan comes with a...
Index: LON-15056
Index: LON-15056
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €2.24 Price €2.24

Set of heat sinks for Raspberry Pi - with heat transfer tape - black - 4pcs.

The kit contains 4 pieces of black heatsinks that are 14 x 14 mm , 14 x 10 mm, 9 x 9 mm, 7 x 7 mm. There is double sided, thermally conductive tape on the bottom of...
Index: DNG-18746
Index: DNG-18746
Shipping in 24 hours
Available
(Check quantity)
Regular price €1.01 Price €1.01

Thermal conductive tape AG Thermopad 20x130x2mm - 6W / mK

The tape improves heat transfer between electronic components. Used in places where the use of thermal conductive paste is not possible. The tape is double...
Index: CHE-05704
Index: CHE-05704
Shipping in 24 hours
Available, 24 hours shipping!
(Check quantity)
Regular price €5.60 Price €5.60

Thermal conductive tape Thermopad 20x130x2mm - 2.4W / mK

The tape improves heat transfer between electronic components. Used in places where the use of thermal conductive paste is not possible. The tape is double...
Index: CHE-05703
Index: CHE-05703
Shipping in 24 hours
Available, 24 hours shipping!
(Check quantity)
Regular price €2.86 Price €2.86

Thermal conductive tape thermopad 30x30x2mm - 2.4W / mK

The tape improves heat transfer between electronic components. Used in places where the use of thermal conductive paste is not possible. The tape is double sided adhesive....
Index: CHE-05705
Index: CHE-05705
Shipping in 24 hours
Available, 24 hours shipping!
(Check quantity)
Regular price €1.33 Price €1.33

Fan Shim for Raspberry Pi 4B/3B+/3B/2B - Pimoroni PIM461

The fan with Fan Shim stand for Raspberry PI allows direct cooling of the minicomputer without additional fixtures and housings. The base is equipped with an RGB LED which,...
Index: PIM-14882
Index: PIM-14882
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €11.23 Price €11.23

Peltier Cell TEC1-12708 12V / 8A

The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 8 A of current. Board sizes - 40 x 40 x 3.6 mm.
Index: DNG-10020
Index: DNG-10020
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.60 Price €5.60

AG Extreme thermal paste - 3g syringe

The paste improves heat transfer between the heatsink and electronic components. It protects the system against weather conditions. The substance is...
Index: CHE-05700
Index: CHE-05700
Shipping in 24 hours
Available, 24 hours shipping!
(Check quantity)
Regular price €5.15 Price €5.15

Set of heat sinks for Raspberry Pi - with heat transfer tape - silver - 4pcs.

Set of 4 pieces of silver heatsinks that are 14 x 14 mm , 14 x 10 mm, 9 x 9 mm, 7 x 7 mm. There is double sided, thermally conductive tape on the back of them. They...
Index: DNG-18745
Index: DNG-18745
Shipping in 24 hours
Available
(Check quantity)
Regular price €1.01 Price €1.01

Why is this so important? Because electricity is lost in a given process, it is usually revealed by the added thermal energy. It is easy to observe this phenomenon on the example of classic, cheaper light bulbs. Usually, the heat generated in this context will be an undesirable factor. Often, excess heat poses a risk to the device itself. A great example are computers, electronic components or car parts. Failure to dissipate heat properly may result in damage to the component. Therefore, proper cooling is a very important element in the design of the devices.

Professional coolers and radiators for electronic equipment and computers

Radiators are the cheapest and most popular solution in passive cooling systems. But they are truly effective. The radiator is an element made of metal or metal alloys that dissipates heat well - it is usually an aluminum alloy. It has the form of a profiled block, the shape of which optimally transfers heat to the environment (air, water or other coolant). This device requires no additional power supply. In addition, our offer includes many other related devices that differ in size, shape and potential use.

When it comes to graphics coolers and processors, it is worth mentioning the solution which are thermally conductive tapes and pastes. These are very important elements that, thanks to the special chemical composition, will ensure a reduction in the temperature inside the device. Thermally conductive tapes and pastes significantly increase heat conduction at the interface between the surface of the cooled element and the radiator. To reduce the temperature as much as possible, use heat conductive tapes and pastes together with additional heat sinks. In places where there is no proper fastening of the heat sink, you can use tapes, which, thanks to adhesive coating on both sides, will attach the heat sink to the cooled element.

Don’t like radiators? Choose active cooling!

If the use of a radiators does not bring the expected results, select the active cooling available in our store. Heat pumps and water cooling are the basic elements of active cooling systems. These are popular solutions that work primarily as a cooling of computer components. You will often find active cooling in modern gaming sets.

In the Botland store you will find fans with dimensions starting from 25x25 mm, which are perfect for applications in microprocessor systems as computer cooling. Do you want to overclock your PC? No problem - we offer a special product - Peltier cells. This is another active cooling solution. A thin plate made of semiconductors, which thanks to the Peltier thermoelectric effect absorbs heat under the influence of current flow, which significantly improves the efficiency of cooling.

Different types of cooling systems

As you can see in the examples above, in this category you will find various types of cooling products. We have placed here classic devices that improve work comfort - professional radiators, fans (standing, desk, small, large fans). We also sell professional cooling devices for electronic components. Please familiarize yourself with the offer of graphics card radiators and engine heat sinks for mechanical devices, cooling pads for laptops and other particular professional coolers. In addition, we invite you to familiarize yourself with the offer of fan covers and advanced products such as Peltier cells.

However, when choosing the best product, do not forget about your own preferences and needs. In addition to cooling systems for computers and electronic components, choose classic fans for the home and office. In our store we also have desk and standing fans of different diameters, including equipped with speed mode switches, automatic oscillation, adjustable angle of inclination, adjustable height, as well as a remote control. Check also the convenient travel fans that you can attach to your laptop via a USB port!