Description: Fiberlogy FiberSatin 1,75 mm 0,85 kg - Red
FiberSatinmatte felt inredcolor, designed for printing inFFF/FDMtechnology. Distinguished by rough texture. In the touch it resembles thefeltwith an addition of carbon fiber, so that disperses the light, giving printouts a very delicate gloss. FiberSatin prints as easily as traditional PLA. Due to its strong adhesion, it is recommended to print on masking tape. The product has a net weight of0.85 kg. Filament is recommended to use for 3D printing of various types of decorations, toys, functional models, etc.
In our offer of filaments you will also find other materials and colors.
Properties of FiberSatin
- Semi-matt finish with a delicate gloss
- Excellent layer hiding properties
- Rough texture
- As easy to print as PLA
Suggested parameters for printing with this felt
| Printing Temperature | From 200°C to 230°C |
| Table temperature | 50°C |
| Closed chamber | Not required |
| Due to differences in printer design, the above data should be treated as a guideline, and the appropriate values should be determined experimentally. |
Fiberlogy felt specification
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.02 mm |
| Colour | Red |
| Printing temperature | From 200°C to 230°C |
| Table temperature | 50°C |
| Material | FiberSatin |
| Printing speed | < 60 mm/sec. |
| Drying conditions | 40°C / 4 h |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Roundness | +/- 0,01 mm |
| Retraction speed | 20 to 45 mm/sec. |
| Recommended substrate | PEI, masking tape, glass |
| air supply | from 75% to 100% |
| Net weight | 0,85 kg |
Properties graph for FiberSatin filament.
Useful links |
