Nowadays, weather sensors are actually the basis. Imagine a dark winter morning when you have to get up for school or work. But you do not know what temperature is outside the window, is it humid, is the wind blowing, or maybe in the era of infamous smog problems, the air quality is so low that maybe it would be better to stay at home? It does not matter if we ask ourselves questions as simple as the above or we want to ... create an advanced robot that works under the weather conditions! High-quality weather sensors will be used in each case.
LoRa Expansion 868MHz for Raspberry Pi Pico - SB Components SKU21628
Index: SBC-21674
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Weather sensors
Loading...
Temperature and humidity sensor DHT11 + 50C
Popular temperature and humidity sensor with a digital, single wired interface. Measurement range: temperature 0°C to +50 °C, humidity 20% to 90% RH .
Index: UCC-09301
Index: UCC-09301
BME280 - humidity, temperature and pressure sensor 110 kPa I2C / SPI - 3.3V
Humidity, temperature and pressure sensor powered with the voltage of 3.3 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 10% RH to 100%...
Index: DNG-11803
Index: DNG-11803
Temperature and humidity sensor DHT11 - module + wires
Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH . It has connectors for connecting the sensor...
Index: MOD-01886
Index: MOD-01886
DS18B20 temperature sensor + 4,7kΩ resistors
This kit consists of one temperature sensor DS18B20 with the 1-wire interface and ten resistors of 4.7 kΩ in the through-hole case.
Index: SES-09821
Index: SES-09821
BME280 - humidity, temperature and pressure sensor 110 kPa I2C / SPI - 3.3V - soldered connectors
Very easy to use temperature, humidity and pressure sensor. The module is powered by 3.3 V and can also communicate via I2C or SPI interface . Sensors of this type are...
Index: ZES-16534
Index: ZES-16534
Temperature sensor TMP36GT9Z - analog THT
Analog thermometer, in which the output voltage is proportional to the measured temperature from the range: -40 °C to +120 °C. It is powered with the voltage from 2.7 to 5.5 V.
Index: SES-02558
Index: SES-02558
Temperature and humidity sensor DHT22 (AM2302)
Popular temperature and humidity sensor with digital interface, jednoprzewodowym . Measuring range: temperature from -40 to 80 °C, humidity 0-100% RH.
Index: UCC-01612
Index: UCC-01612
Temperature and humidity sensor DHT11 - blue module
Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH. It has connectors for connecting the sensor...
Index: MOD-03030
Index: MOD-03030
SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1m - Adafruit 4099
Temperature and humidity sensor equipped with a weatherproof metal mesh and a 1 m long cable. The measuring range for temperature is from -40 °C to 125 °C, for humidity from 0...
Index: ADA-14969
Index: ADA-14969
Temperature and humidity sensor DHT21 (AM2301) in case
Temperature and humidity sensor with a digital, single-wired interface. Measuring range: temperature -40 to 80 °C, humidity 0 to 100 % RH . Powered with voltage in the range...
Index: MOD-01884
Index: MOD-01884
DFRobot Gravity - analog soil moisture sensor - corrosion resistant - SEN0193
The device is used to measure soil moisture by the capacitive detection. It has a built-in voltage regulator which provides an operating voltage range from 3.3 V to 5 V. It is...
Index: DFR-10305
Index: DFR-10305
The sensor is used to detect precipitation. It is powered with the voltage of 5 V. It has digital and analog output, making it compatible with most of the commissioning...
Index: MOD-01732
Index: MOD-01732
Grove - sensor / probe for measuring soil moisture v1.4 - analog
The sensor allows you to determine the moisture level of the soil. It is supplied with the voltage from 3.3 V to 5 V. The output has analog voltage, which increases its value...
Index: SEE-11338
Index: SEE-11338
Temperature and humidity sensor DHT22 (AM2302) - module + cables
Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature -40 to +80 °C, humidity 0-100% RH.
Index: MOD-02637
Index: MOD-02637
MCP9808 - high precision I2C temperature sensor - Adafruit 1782
Module with digital thermometer MCP9808 operating in the range of -40 °C to 125 °C with an average accuracy of 0.25 C. It communicates via the I2C bus, it is powered with the...
Index: ADA-03144
Index: ADA-03144
Overlay for Raspberry Pi equipped with BME280 temperature, pressure and humidity sensor, LTR-559 light and proximity sensor, MICS6814 analog gas sensor, ADC ADS1015...
Index: PIM-17074
Index: PIM-17074
Radiation meter for the detection of γ-, β- and X-ray radiation - Joy-it JT-RAD01
A Geiger counter allows you to detect gamma, beta and X-ray radiation in the environment around us. It is characterized by exceptionally simple operation, high measurement...
Index: SEG-23552
Index: SEG-23552
Laser dust/air sensor PM2.5 / PM10 SDS011 - 5V UART/PWM
The laser sensor of dust for the control of air purity. Allows to detect particles with diameter more than 0.3 μm, designed to measure PM2.5 and PM10. It has a fan that sucks...
Index: SEN-08332
Index: SEN-08332
Grove - precipitation / water sensor
The Grove sensor used to detect the presence of water or its quantity. It is powered with the voltage of 5 V. It can be used to detect the presence, level or absence of water.
Index: SEE-11363
Index: SEE-11363
Gravity - rainfall sensor - I2C and UART - DFRobot SEN0575
The Gravity rainfall sensor from DFRobot is a reliable and convenient device for precise measurements. Its design is based on a container with inclined walls that allow...
Index: DFR-23474
Index: DFR-23474
Dust sensor / particle concentration - GP2Y1010AU0F air purity monitor + module - Waveshare 10500
Dust sensor allows you to monitor the purity of the air. It is equipped with the Sharp GP2Y1010AU0F sensor, it allows to detect particles with diameter of more than 0.8 µm, for...
Index: WSR-04480
Index: WSR-04480
DFRobot Gravity – Lightning Sensor
The module is equipped with the AMS AS3935 Franklin system and a special antenna Coilcraft MA5532-AE for determining the distance from atmospheric discharges, intensity and...
Index: DFR-13752
Index: DFR-13752
Dust/air quality sensor PM1.0 / PM2.5 / PM10 - PMS5003 - 5V UART
Sensor of dust allows monitoring the air quality, measures the ratio of PM1.0, PM2,5, PM10. Equipped with a sensor that could detect particles with diameter more than 0.3...
Index: MOD-06797
Index: MOD-06797
Weather station with measurement of the direction and speed of wind - SparkFun SLEEP-15901
A set of elements allowing you to construct your own weather station for home use. It consists of a wind speed and direction sensor and a precipitation sensor. In...
Index: SPF-16258
Index: SPF-16258
See also
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
- Gravity modules
Weather sensors
Something for fans of microcomputer projects
We have prepared for you a wide range of weather sensors in the form of discrete elements, as well as ready-made modules with power systems that are ready to work with popular microcomputer development kits, such as Arduino or Raspberry Pi. The DS18B20 temperature sensors with a 1-wire interface, known to electronics, are widely used and appreciated for their wide temperature measurement range and simple operation from the 1-wire interface microcontroller, combined with the SYH-2R series resistive humidity sensors will allow you to construct the simplest, yet very useful station. weather at a very affordable price. If you want to expand the capabilities of your station, use a very interesting humidity, temperature and pressure sensor BME280, combined with dust and air purity sensors DSM501B, PMS5003 or SDS011. For the most demanding users, we offer Arduino or Combo CCS811/BME280 weather station modules, which enable measurement of pressure, temperature, air humidity, altitude, as well as organic compounds and carbon dioxide in the air. They also have connectors for optional weather sensors, such as wind direction and speed, or rainfall sensors.
Turn on and measure
Of course, to have your own weather station, you don't have to be a fan of wires, soldering or microprocessor programming. At Botland you'll find the Green Blue GB522 WiFi weather station, which is ready to use right out of the box. On the large color screen, you will see the current temperature, humidity, pressure and graphic weather forecast, as well as the current time, phases of the Moon and trends in changes in atmospheric conditions. Thanks to WiFi, you can see the same measurements anywhere in your apartment using a mobile phone with the station manufacturer's application installed. However, if you would like to try your hand at electronics, we have a real attraction for you - a weather station for self-assembly! You receive a set of elements with a stylish wooden casing and assembly documentation. The station's design is based on an Arduino system and can measure CO2, TVOC, atmospheric pressure, temperature and air humidity, and also detects lightning or electronic discharges within a radius of up to 40 km! All measurements are visible on the color display. If you are looking for an autonomous air purity, smog and dust sensor, try LookO2 v3, the measurements of which can be read in the cloud via built-in WiFi using any device with Internet access.
Weather sensors - FAQ
The weather sensor should be installed in a place where it can freely measure air temperature and humidity, but will not be directly exposed to sunlight or precipitation.
An external weather sensor connected to a home weather station is a convenient solution that allows you to check the nearest forecasts and current parameters such as temperature, air humidity and atmospheric pressure at any time.
