Product description: Fermion - smoke sensor - MEMS - 10-1000 ppm - DFRobot SEN0570
Sensor from DFRobot , designed for qualitative smoke detection. The detection range is from 10 ppm to 1000 ppm . Moreover, the sensor is characterized by low energy consumption, its current consumption does not exceed 20 mA , and the manufacturer estimates the module lifespan at approximately 5 years . The module is used in the construction of advanced alarm systems and air pollution notification stations.
Also check out the user guide prepared by the manufacturer!
Fermion - smoke sensor - MEMS - 10-1000 ppm - DFRobot SEN0570.
The module is used when building advanced alarm systems.
Special features of the sensor
- It has a modernized MEMS system for qualitative smoke detection.
- Compact dimensions (13 x 13 x 2.5 mm) allow for easy integration with other project components.
- It has low energy consumption.
- Provides precise and stable value reading.
- It has high sensitivity and short response time.
Suggested use of the sensor
- Alarm Systems
- Portable detectors
- Weather stations
Precautions during use
- Before using the sensor, remove the protective film from it.
- Avoid using the sensor in an environment where it will be exposed to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, among others).
- Protect the sensor against contamination with alkalis, alkali metal salts and halogens.
- Avoid long-term exposure of the tile to unfavorable environmental conditions (such as high temperatures, high humidity, high pollution).
- Do not expose the module to water.
- Do not expose the module to vibrations, impacts or falls from height.
- Do not test the module on systems that involve personal security concerns.
Sample connection diagram.
Attention!
Fermion - smoke sensor - MEMS - 10-1000 ppm allows only qualitative measurements.
Elements included in the set.
Technical specifications of the sensor
- Detected gas: EtOH, smoke
- Detection range: from 1 ppm to 1000 ppm
- Supply voltage: 3.3 V to 5 V DC
- Current consumption: < 20 mA
- Output signal: analog
- Sensitivity: R0 (in air) / Rs (in 200 ppm EtOH) ≥ 3
- Operating temperature range: from -10°C to 50°C
- Operating humidity range: 15% to 90% RH (non-condensing)
- Service life: ≥ 5 years
- Dimensions: 13 x 13 x 2.5 mm
Set contents
- Fermion - smoke sensor - MEMS - 10-1000 ppm
- Goldpin strip - 2.54 mm pitch
