Measuring is one of the most important activities during prototyping, service, repair or overhaul work. For all work to be carried out precisely, we need precise data on width, length, weight, pressure or current, depending on the project and the elements and tools we work with. Measuring devices which should be included in the workshop equipment are selected taking into account the specifics of the work performed. The choice includes meters, thermometers, barometers, fractional generators and electric multimeters. Each of these devices has a different purpose and is used to measure a different unit. The measuring devices have found their application in professional workshops, but also in small studios and at home, in everyday use. They are indispensable in creating electronic projects and working with electronic devices. It is important that all measurements are reliable and accurate, so in Botland you will find only good quality devices.
Measuring instruments & devices
Universal multimeter Rebel RB-830
Universal meter for basic electrical and electronic measurements. Using the multimeter, it is possible to measure DC current up to 10 A , DC voltage up to 1000 V or AC...Cables, measuring probes for multimeters - 3-piece crocodile clips
Three cables for the gauges ended on the one side with the banana plugs, on the other, with the connectors of the crocodile type. Cable length is 85 cm (without plugs and...Benetech GM3120 electromagnetic field meter
The instrument allows the measurement of electrical radiation in the range from 1 V/m to 1999 V/m and magnetic emission in the range from 0.01 μT to 19.99 μT and bandwidth...Cables, measuring probes for multimeters - PM7
Cables on one end have angular banana connectors with shielded tips with a diameter of 4 mm, on the other end there are measuring probes with a length of 145 mm. Length of the...Temperature Meter Pyrometer Benetech GM320 from -50 to 380C
IR contactless pyrometer thermometer. It has a laser pointer for accurate targetting the measured point. The device is equipped with a graphical backlit display and has an auto...Caliper Vorel 15120 150mm - plastic
Caliper made of plastic by Vorel with a measuring range from 0 to 150 mm and accuracy +/- 0,05 mm. Packed in a plastic case.Calipers Vorel 15110 + case - 0-150mm
Stainless steel calliper by Vorel with measuring range from 0 to 150 mm and accuracy +/- 0.2 mm. Packaged in plastic case.Universal multimeter UNI-T UT33D+
The UNI-T multimeter allows to define DC and AC parameters and to perform NCV ( electric field detection ) measurements . Obtained results are presented on a backlit...Temperature Meter Pyrometer Benetech GM550 from -50 to 550C
IR contactless pyrometer thermometer. It has a laser pointer for accurate targetting the measured point. The device is equipped with a graphical backlit display and has an...Cables, test probes for multimeters - banana plug/universal angle 85cm
Cables for multimeters. On one end they have banana connectors with a diameter of 4 mm and on the other there are measuring probe length of 110 mm. Cable length 85 cm...Analog ammeter - panel 91C16 mini - 20A
Analog ammeter capable of measuring current in the range up to 20 A. It has a square case in size 40 x 40 mm. The accuracy CLASS 1.5.USB multimeter KWS-V21 Charger Detector
Small size USB meter designed for testing USB 2.0 sockets . Very easy to use. It is equipped with a clear LCD screen, which displays voltage, current, capacity and...Cables, measuring probes for multimeters - universal angular 85cm
The cables are terminated on one side with angled banana plugs with shielded ends of 4 mm diameter, on the other side with 110 mm long measurement probes. Cable length is 85 cm...YT-7220 feeler gauge for leveling the hotbed in a 3D printer
Tool designed to measure small gaps . Thanks to precisely made 17 leaves of different thickness , it allows you to easily measure the distance between two planes. The...Functional generator DDS JDS6600 15MHz - 2 channels
Dual channel function generator with waveform generation up to 15 MHz, 200 MSa/s with 12 bit vertical resolution, 17 standard waveforms and 60 built-in 2048 point arbitrary...Measuring tape Yato Yato YT-7105 - 5m
Universal roll-up measure with a length of 5 m. The casing is made of ABS plastic, additionally for the convenience of users it has anti-slip black rubber. The tape is white in...Tachometr kontatkowy - Benetech GM8906
A tachometer is a device used to measure the rate of linear speed rotation and frequency of electric motors, rotors, blades, shafts, etc.Universal multimeter UNI-T UT55
The multimeter enables to measure DC and AC voltage, flow of DC and AC current, resistance, capacitance, frequency and temperature. The device has the function of testing...Anemometer / anemometer Benetech GM816 - 6-arm rotor
Anemometer / wind gauge is used to measure the movement of gases, the flow rate of air. The device has a 6-arm rotor, which, due to gas flow, begins to rotate. Measurements are...Functional generator DDS JDS6600 60MHz - 2 channels
Dual channel function generator with waveform generation up to 60 MHz, 200 MSa/s with 12 bit vertical resolution , 17 standard waveforms and 60 built-in 2048 point arbitrary...Digital calipers Vorel 15240 + case - 0-150mm
Digital calipers made by Vorel with a measuring range from 0 to 150 mm and accuracy +/- 0,02 mm. Packed in a plastic case.Electronic caliper Yato YT-7201 150mm + case
Digital caliper made by Yato with a measuring range from 0 to 150 mm and accuracy +/- 0,02 mm. Packed in a plastic case.See also
Measuring devices for the workshop, workshop and home
Measuring physical values is one of the most frequently performed activities when doing DIY, creating electronic projects or working with electrical devices. To make the measurements accurate and reliable, appropriate tools are needed - sensors, meters and other measuring instruments.
Electric meters and multimeters
In the measuring devices category you will find a large selection of analog and digital meters for electrical quantities. Tools available include measuring DC and AC voltage, current, resistance and electrical capacity, as well as oscilloscopes, function generators and electricity consumption meters. In this section you will also find battery charge level meters and socket and network cable testers. We also offer a wide selection of electrical multimeters that allow you to measure many parameters with one device. Universal multimeters are made of light and at the same time durable plastic. It is characterized by versatile use (both inside and outside buildings), high accuracy and repeatability of measurements.
Other measuring devices
Our assortment includes a wide range of devices for measuring weather parameters: air purity sensors (detecting dust, smoke or the presence of substances such as carbon monoxide, alcohol, gasoline, ammonia or formaldehyde), thermometers, barometers, hygrometers and anemometers.
We offer devices for the analysis of radio waves, thermal cameras, sonometers, tachometers and metal detectors, as well as a wide selection of scales, measuring cups and calipers (including spirit levels and rangefinders). Our assortment also includes lux meters, i.e. devices designed to measure light intensity. On the Botland website you will also find a wide selection of meter probes, cables, connectors and adapters used in measuring devices.
What should you pay attention to when choosing measuring devices?
Regardless of the type of measuring device and the physical quantity it measures, all tools of this type have a specific degree of accuracy and a specific measurement range.
Matching them to the planned use is very important for subsequent comfort of use - for example, a jewelry scale will be completely useless in the kitchen, while a high-voltage cable meter will not work for precise electronic projects.
Measuring tools - what else is worth knowing before choosing?
Moreover, many measuring devices are available in both analog and digital versions, and both variants have their advantages and disadvantages. Analog meters are usually more accurate (although there is a higher probability of incorrect data reading) and do not require additional power supply.
However, digital devices are often lighter and easier to transport, and the read value leaves no doubt. However, they need power, and the result is always more or less rounded.
Measuring devices
Measuring devices are an extremely broad group of products, including both electrical measurement devices (e.g. multimeters, oscilloscopes , functional and arbitrary generators, wattmeters, energy meters and battery testers) as well as various temperature, humidity, pressure and flow rate meters. media, distance, etc.
The category of measuring tools includes primarily devices used to measure thickness, length and depth ( calipers and micrometers), although in precision mechanics special protractors are also used. In the construction and renovation industry, for example, they are constantly used: popular laser rangefinders.