Description
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others. Connecting of the modules is facilitated by the special BaseShield together with the wires.
The set is sent in a plastic box.
|
Intel providesthe programming environmentandexamples of the connection of modules to the IoTnetwork. |
The contents of the set
The kit includes 14 items, description of individual modules is available in the table.
| L. p. | Photo | Description |
|---|---|---|
| 1 |  |
Base Shield v2- shield for Arduino to connect the sensors with the provided cables. |
| 2 |  |
Module with buzzer - simple sound signal generator. |
| 3 |  |
Module with button - board with tact switch buttonand resistor pulling up to the mass. Communication is a digital signal 0/1. |
| 4 |  |
Module with LED (set of three colors: blue, red and green) - it has a built in resistor that limits the current on the diode, it can be controlled by PWM signal. |
| 5 |  |
Module with linear potentiometer - module with a range of 300° and a linear change of value. The resistance is 10 kΩ. |
| 6 |  |
Module with sound sensor- used to detect the surrounding sound level. It has an analog output. Microphone sensitivity at 1 kHz: from 48 to 52 dB. |
| 7 |  |
Module with relay- maximum voltage is 250 V AC, maximum current is 15 A. For security purposes, we recommend working with voltages up to 24 V. |
| 8 |  |
Module with temperature sensor - module measures the temperature from -40 °C to 125 °C with accuracy of 1.5 °C. |
| 9 |  |
Module with touch sensor- communication with module is a digital signal of 0/1. The response time of the sensor is from 60 MS to 220 MS. |
| 10 |  |
Module with light sensor- a sensor measures the ambient light intensity. Based on the LM358 chip. |
| 11 |
|
Servo, type micro- servo with the range of movement of 180 °. The the set has the hooks and installation screws. |
| 12 |  |
LCD display with RGB backlight- display screen withbacklight, in full color palette. It communicates with the microcontroller via I2C. It has the built-in English and Japanese fonts. |
| 13 |  |
Clip on the 9Vbattery with Jack output- it allows you to bring the power from the battery, its length is 12.6 cm. |
| 14 |  |
10 wires of 4-pin Grove- they let you combine modules with Base Shield v2. |
Useful links |
