- New
- New
- New
M5Stamp Pico DIY Kit - development kit with ESP32-PICO-D4 - M5Stack
Index: MSS-20159
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand Seeedstudio
Seeedstudio is a company that is recognized and appreciated all over the world. The company produces and distributes high-quality robotic equipment - with the help of Seeedstudio products you can build many creative devices and realize your own ideas for new inventions or utility equipment.
Loading...
Grove - 2-channels relay with optoisolation - 10A/250VAC - coil 5V + clear case
The module has two SRD-05 relays with the coil powered with the voltage of 5 V with optical insulation of input and mounting holes. The system allows you to control...
Index: SEE-12626
Index: SEE-12626
Grove - module with LED RGB WS2813 diode - Seeedstudio 104020169
The module is equipped with RGB LED with WS2813 chip. It works with a voltage of 3.3 V and 5 V . The use of Grove connector makes it much easier to connect the module to...
Index: SEE-15553
Index: SEE-15553
Grove - I2C hub - 8 ports - TCA9548A - Seeedstudio 103020293
Splitter allowing to extend the number of I2C ports in the main module by another 8 pieces. The Hub is equipped with TCA9548A chip, which allows to connect 8 modules with the...
Index: SEE-16092
Index: SEE-16092
Grove - infrared thermometer OTP-538U IR
Module from the Grove series, based on a sensor OTP-538U which, to measure the temperature, is using the analysis of infrared radiation in the range from -10 °C to 100 °C. It...
Index: SEE-11324
Index: SEE-11324
Grove - L298N - two-channel motor controller 15V / 1A
Grove series module equipped with a two-channel H-bridge L298N , controlled by ATmege 8L. The circuit allows to regulate the direction of rotation of motors with maximum...
Index: SEE-11320
Index: SEE-11320
Grove - LED Strip Driver v2.0 - LED driver for Arduino - Seeedstudio 105020002
A module that allows you to control the brightness of monochrome LED strip with LED RGB brightness and color. It has 2-pin connectors, power supply screw connector, 4-pin screw...
Index: SEE-04443
Index: SEE-04443
Grove - LoRa Radio module 868MHz
868 MHz RFM95 long-range radio module (Long Range: LoRa). Allows data transmission at distances up to approx. 800 m , using the cable as an antenna. The module is equipped...
Index: SEE-15262
Index: SEE-15262
Grove - Red Wrapper 1x1 - 4pcs
The cover of Grove series modules in red with dimensions 25 x 25 x 13 mm. The cover is compatible with Lego and Makeblock, which gives great possibilities in building...
Index: SEE-15269
Index: SEE-15269
13.56MHz NFC antenna with U.FL connection
The NFC antenna operating in the band of 13.56 MHz and equipped with a u.FL connector. It works, i.a. with modules of NFC Shield V2 Grove Xadow NFC and NFC.
Index: SEE-04416
Index: SEE-04416
Grove - ADC converter for HX711 load cell sensors - Seeedstudio 101020712
Arduino compatible 24-bit ADC converter module allows to read values from pressure sensors. It has built-in amplifier with optional 32 dB, 64 dB and 128 dB gain. On the board...
Index: SEE-15855
Index: SEE-15855
Grove - module with Bluetooth 3.0 with EDR
Module from the Grove series, allowing to connect via Blootooth v3.0 + EDR, class 2. It works with a voltage of 5 V, it communicates through the Grove standard slot, it...
Index: SEE-13345
Index: SEE-13345
Grove - AC current sensor TA12-200
The sensor measures the intensity of the current flowing in the pipeline without its opening. Measurement occurs through the insulation on the one wire, output is the current...
Index: SEE-11306
Index: SEE-11306
Realtek RTL8720DN Dual-Band communication module - WiFi 2.4GHz/5GHz and Bluetooth 5.0
Realtek RTL8720DN communication module , allowing to implement wireless communication to our project. The product allows for WiFi communication using 2.4 GHz and 5 GHz and...
Index: SEE-16640
Index: SEE-16640
Grove - L298P - two-channel motor driver 12V/2A - Seeedstudio 105020093
A module with an L298P motor controller that supports two DC motors or one stepper motor. The voltage supported by the controller is between 6 V and 12 V and the continuous...
Index: SEE-16906
Index: SEE-16906
Grove - Variable Color LED v1.1
Module with RGB LED and Grove connector. The color of the LED can be changed by digital signal and PWM, as well as by potentiometers on the board. The module is powered from...
Index: SEE-15454
Index: SEE-15454
Grove - LCD display 2x16 characters with backlight (Black on Yellow)
Monochrome 2 x 16 character LCD display with high brightness backlight from Grove. The module communicates with the control board via the two-row I2C bus. The screen is powered...
Index: SEE-14735
Index: SEE-14735
Grove - LCD display v2.0 2x16 characters with backlight (Black on Red)
Grove module with 2 x 16 characters monochrome LCD display with high brightness backlight. It communicates via the two-row I2C bus. It is powered from 3.3 V to 5 V. A Grove...
Index: SEE-14734
Index: SEE-14734
Grove - LCD display 2x16 characters with RGB backlight
LCD display 2x16 characters with backlight in any color palette RGB. Communicates with the two-wire I2C bus. It is supplied with the voltage from 3.3 V to 5 V. T he kit...
Index: SEE-11326
Index: SEE-11326
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-13344
Index: SEE-13344
Grove Beginner Kit with 10 Sensors and Seeeduino Lotus - Seeedstudio 110061162
The kit includes 10 popular sensors with a Grove connector and a Seeeduino Lotus module with an ATmega320P microcontroller. The pinout is compatible with the Arduino Uno....
Index: SEE-17042
Index: SEE-17042
Grove - relay 1 channel - 30A-250VAC / 30VDC contacts - 5V coil
Module with relay that control the actuators consuming the current of up to 30 A for the voltage of 250 V AC, 30 V DC using the ports of the microcontroller. The module is...
Index: SEE-11351
Index: SEE-11351
Grove - Speech Recognizer v1.0 - ISD9160
Voice recognition module based on Nuvoton ISD9160 with built-in microphone. The board is equipped with a Grove connector for easy connection with a Base Shield cap. It...
Index: SEE-15327
Index: SEE-15327
ReSpeaker Mic Array v2.0 by Seeed is another more extended version of ReSpeaker Mic Array v1. The board with built-in long-range microphone, capable of detecting voices at a...
Index: SEE-14133
Index: SEE-14133
High-class 4-channel relay for using the maximum voltage of 250 V and a current of 10 A.
Index: SEE-14418
Index: SEE-14418
Seeedstudio
Seeedstudio is a company that has clients practically all over the world. It exists since 2008 in Shenzhen. The founders' premise was to create a field for creative makers and then turn ideas into products. The company deals with both production and distribution of robotic equipment on all continents. New products are constantly being introduced to the offer, and the team of employees is working on developing and introducing new ideas that will contribute to innovative technologies. The company is also trying to contribute to solving the problem of too few educated engineers by distributing educational kits for different age ranges and encouraging studies at technical universities.
Groove embedded systems
Seeedstudio is the developer of the popular Groove, which is now one of the most widely used embedded systems. It is a field of computer technology that is used more and more often by both professionals and hobbyists. Using the appropriate Groove modules, you can easily prototype electronic devices. The interface and corresponding adapters are designed to ensure full compatibility with Arduino or Raspberry Pi. Groove offers a number of different modular solutions - these include perfectly prepared accelerometers and gyroscopes encapsulated on a single board, gas and liquid sensors (air purity, carbon dioxide, alcohol, LPG, natural and coal gas), distance, motion and gesture sensors, current, pressure and limit sensors, light, color, temperature, humidity, pressure or medical sensors (for example, monitoring pulse or muscle activity). The company also offers actuator modules, i.e. devices that convert a specific physical quantity into another physical quantity - most often an electrical signal, converted into, for example, the movement of a fan propeller or the activation of an electromagnet. LED modules, encoders and potentiometers, converters, transducers, relays and communication modules (RFID readers, WiFi, Bluetooth or GPS modules) are also available for purchase. Also available are sounders, buttons, keys, joysticks, motor controllers, displays, connection cables, covers and enclosures, and base caps (for connecting Groove to Arduino). You should also consider choosing a starter kit, which will provide many useful components at a lower price. h2>What else from Seeedstudio? The company's offer is wide and attractive - apart from the mentioned Groove elements, you can also buy products such as Arduino compatible boards, connection modules or displays for electronic devices.