Raspberry Pi with its additional equipment and peripheral devices can turn into a real advanced system for managing a large electronic project. Popular Raspberry is used not only to teach programming and hobbistically by robotics enthusiasts, but also to create practical applications to improve daily activities, work and operations. This is possible thanks to special overlays, with a keyboard and display. It is a series of Raspberry Pi Hat overlays, which differ in the type of display, so that they can be perfectly adapted to the specific project. You can choose between a push-button interface or an E-paper display, or the popular LEC or OLED. All our products are compatible with Raspberry Pi. Overlays are also characterized by the presence of dedicated programming libraries, so that launching the overlays is quick and easy. Similarly, installation of overlays is a task that even a new friend of Raspberry can handle.
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Minicomputer UP 4000 2GB RAM + 32GB eMMC Intel Celeron N3350
Index: AAE-24030
- Reduced price
- Promotion
Raspberry Pi Hat - controllers, motors and servos
Loading...
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
Pico Motor Driver HAT - 12V/0,6A for Raspberry Pi Pico - SB Components SKU21468
A motor controller in the form of a HAT overlay for the Raspberry Pi Pico . The module is equipped with L293D chip, which allows to control two DC motors or one stepper motor...
Index: SBC-20397
Index: SBC-20397
HRB8825 2-channel stepper motor driver 28V/2,5A - HAT For Raspberry Pi - Waveshare 22311
Two-channel stepper motor driver from Waveshare, in the form of a HAT shield for the Raspberry Pi. The controller is based on two HR8825 systems, it works with a voltage from...
Index: WSR-21705
Index: WSR-21705
Motor Driver HAT TB6612FNG - dual channel 12V/3A for Raspberry Pi - SB Components SKU21789
Overlay for Raspberry Pi equipped with 40-pin GPIO connector, including model 4B / 3B+ / 3B. HAT features a TB6612FNG dual channel DC motor driver, operating from 6 V to...
Index: SBC-20401
Index: SBC-20401
Motor Shield 2x L293D 24V/1A - 4-channel motor controller for Raspberry Pi
Shield allows to control the four DC motors (DC) or two stepper motors. Board designed for Raspberry Pi 4 B, 3 B and 2 B. It has two H bridges in the form of chip L293D .
Index: SBC-09241
Index: SBC-09241
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - soldered - Pololu 5071
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23647
Index: PLL-23647
Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...
Index: CTN-12413
Index: CTN-12413
RPi Relay Board (B) IC Test Board - Waveshare 15275
Shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of up to 16 servos. It communicates via I2C interface and is based on PCA9685 system.
Index: WSR-13309
Index: WSR-13309
Servo pHAT - 16-channel PWM I2C driver for Raspberry Pi - SparkFun DEV-15316
The Servo pHAT overlay from SparkFun allows you to control up to 16 servos via an I2C interface. The chip generates PWM signals up to 1.6 kHz with 12-bit precision ....
Index: SPF-18725
Index: SPF-18725
Servo Bonnet - 16-channel PWM I2C driver for Raspberry Pi - Adafruit 3416
Overlay for Raspberry Pi to control 16 servos . The chip generates PWM signals up to 1.6 kHz with 12-bit precision. The board is designed to fit Raspberry Pi 2 x 20...
Index: ADA-11419
Index: ADA-11419
Stepper Motor HAT - 2 channels - 28V/2,5A for Raspberry Pi - Waveshare 15669
Shield for Rasberry Pi is equipped with a system DRV8825, it allows you to control two stepper motors with a resolution of steps of up to 1/32. It works with motors with a...
Index: WSR-13513
Index: WSR-13513
Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi - Pololu 5034
The Motoron M3H256 is a three-channel DC motor controller manufactured by the Pololu company. The supply voltage of DC motors ranges from 4.5 V to 48 V , continuous current...
Index: PLL-21622
Index: PLL-21622
- Reduced price
- Promotion
Motor SHIM - motor controller for Raspberry Pi Pico - PiMoroni PIM617
The SHIM motor designed by Pimoroni is a driver for the Raspberry Pi Pico that allows you to control two motors . The board also has a utility button and STEMAM QT /...
Index: PIM-21836
Index: PIM-21836
Inventor HAT Mini for Raspberry Pi - PiMoroni PIM672
Inventor HAT Mini is perfect for creating robots, props, moving sculptures and other dynamic Raspberry Pi- based projects. The overlay allows you to connect two motors, four...
Index: PIM-23498
Index: PIM-23498
- Reduced price
- Promotion
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - Pololu 5072
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23646
Index: PLL-23646
- Reduced price
- Promotion
Pan-Tilt HAT for Raspberry Pi - Waveshare 16138
Dedicated to the Raspberry Pi , Pan-Tilt with a camera basket. The module is equipped with an I2C communication interface and a built-in system responsible for PWM motion...
Index: WSR-14430
Index: WSR-14430
Raspberry Pi Build HAT - LEGO motors and sensors driver - RP2040
A LEGO motor and sensor controller made by the Raspberry Pi Foundation. Based on the Raspberry Pi RP2040 microcontroller, this controller for four LEGO motors allows you to...
Index: RPI-20291
Index: RPI-20291
Mini Kit 16-channel PWM I2C driver - Servo Hat for Raspberry Pi - Adafruit 2327
Shield for Raspberry Pi to control 16 servos. The system generates the PWM signal with frequency up to 1.6 kHz with 12 bit precision. Board is suitable for connectors of the...
Index: ADA-03283
Index: ADA-03283
Simply Servos Board - servo controller - 8 channels - for Raspberry Pi Pico - Kitronik 5339
Simply Servos Board is an overlay for the Raspberry Pi Pico, which allows you to control 8 servos at the same time. It is powered with the voltage ranging from 3 V to 12 V....
Index: KTR-21403
Index: KTR-21403
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
MC33926 - two-channel motor controller 28V/3A - shield for Raspberry Pi - Pololu 2755
Module with dual MC33926 driver of motors, working with voltages from 5 V to 28 V and current up to 3 A per channel (max. 5 A). The shield can be linked directly with...
Index: PLL-04231
Index: PLL-04231
MC33926 - dualchannel motor driver 28V/3A - shield for Raspberry Pi 3/2/b+ - assembled - Pololu 2756
Module with dual MC33926 driver of motors, working with voltages from 5 V to 28 V and current up to 3 A per channel (max. 5 A). The shield can be linked directly with...
Index: PLL-04346
Index: PLL-04346
A-Star 32U4 Robot Controller SV 36V/1.7A - extension to Raspberry Pi - Pololu 3119
Programmable system equipped with the famous from Arduino Leonardo, microcontroller Atmega32u4 with installed bootloader. It has dual driver of motors 36 V / 1,7 A and...
Index: PLL-05532
Index: PLL-05532
See also
Types of displays in Raspberry Pi Hat
Our products include overlays equipped with LED display, which is currently the most popular type of display commonly used in much larger devices, such as TV sets. It uses LED technology, which means that it is built with many light-emitting diodes. They are semiconductors of optoelectronic devices. Their advantage is high versatility, they will work well in many different projects. They guarantee a good image quality practically in all conditions, both inside and outside the building. Due to the fact that there are diodes in one emitter in three basic colours, composing pixels, it is possible to obtain many colours through various combinations of existing ones.
Another type of display is OLED, which is made up of organic light-emitting diodes. Their big advantage is a huge contrast, which results in very good image quality. Moreover, it boasts a wider viewing angle than LCD displays. The OLED matrix also has a lower response time. Some people may find the OLED displays' considerable advantage in their small thickness.
You will also find E-paper displays in our shop. They are based on a matrix, in the form of a liquid film layer, which contains negatively or positively charged microcapsules. These types of displays enable to display the last saved content infinitely, this is also possible after disconnecting the power supply. Furthermore, they are characterized by a compact design, low power consumption and simple use. What deserves attention is also very good visibility and readability of the content regardless of conditions. The image is also visible in bright sunlight.
Sense Hat overlay with practical functions
Those who are looking for a really interesting solution for their project and want a multifunctional overlay, should opt for Sense Hat. It is characterized by its small size, but it has many features. It features a sensor to measure ambient temperature, humidity and pressure, as well as an 8x8 LED matrix and a push button joystick. Furthermore, it provides a 3-axis MEMS gyroscope, which can be used to quickly and accurately determine the coordinates in space for an object that is equipped with Raspberry Pi. This will be useful, for example, to create a robot whose location you will be able to determine without any problems, as well as to measure its speed. The built-in LED matrix will display the measurement data provided by the sensors. You can program the overlay using the dedicated Python library.
Develop a unique design with Raspberry Pi Hat overlays. You can choose from a wide range of possibilities, including overlays with various accessories, displays and keyboards. All of these are easy to install and program.