Product description: Filament Fiberlogy Easy PETG 2.85 mm 0.85 kg - Orange
Fiberlogy's orange filament , wound on a spool, has a weight of 0.85 kg and a diameter of 2.85 mm . It is easy to print, which makes it ideal for first-time users. PET in combination with glycol affects the high resistance to mechanical, chemical and atmospheric factors. Easy PETG material eliminates the typical ailments of ordinary PETG , i.e. threading, bubbles or burning of the filament. It is perfect for the production of all kinds of housings for electronics, decorative elements or jewelry. The product is fully compatible with printers that are not equipped with locks that prevent the use of cartridges from third-party suppliers.
Filament Fiberlogy Easy PETG 2.85mm 0.85kg - Orange.
Thanks to the addition of glycol, Easy PETG is resistant to acids, salts and alkaline substances.Easy PETG filament properties:
- Thanks to the addition of glycol, it is resistant to acids, salts and alkaline substances
- Higher physical and chemical strength than PLA
- Flexible and easy to print
- Biodegradable - decomposes in the natural environment
- Safe - does not contain and does not emit harmful substances
- Odorless
In our offer you will also find other Fiberlogy filaments - check it out!
Suggested filament printing parameters
| printing temperature | From 220°C to 250°C |
| table temperature | 90°C |
| Print cooling | Recommended |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 2.85mm |
| Filament dimensional tolerance | +/-0.02mm |
| Color | Orange |
| printing temperature | From 220°C to 250°C |
| table temperature | 90°C |
| Material | Easy PETG |
| Desiccant | Yes |
| Vacuum packing | Yes |
| roundness | +/- 0.01mm |
| Size of the package | 205 x 205 x 90mm |
| Mass | 0.85 kg |
