Product description: Devil Design ABS+ 1.75 mm 0.8 kg - Black
Devil Design ABS+ filament is a thermoplastic filament used as a cartridge for printing pens and 3D printers using the FFF printing method . The filament is vacuum-packed on a spool with a moisture absorber.
Our range of filaments also includes other materials and colors.
Devil Design ABS+ filament 1.75 mm 0.8 kg - Black.
Each spool contains 0.8 kg net of filament . It can be used in all FFF printers that are not protected against the use of material from a third-party supplier or open-source construction. ABS+ is easily machined, such as sanding or drilling, and is soluble in acetone .
Properties of ABS
- There is a smell of melting plastic while printing
- More durable than PLA
- It melts at a relatively low temperature: from 180°C to 220°C. It is very important to choose the appropriate temperature specified by the manufacturer.
- Easy to sand, you can drill holes in it without any problems
- It is cheap and comes in many color variants.
ABS+ filament is characterized by increased resistance to atmospheric factors and UV radiation.
Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally.
Suggested filament printing parameters
| Head temperature | From 230°C to 240°C |
| Table temperature | From 90°C to 100°C |
| Print cooling | Not recommended |
Technical specifications and physical properties of Devil Design ABS+ filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Filament roundness | +/- 0.02 mm |
| Material surface | Gloss |
| Material shrinkage | Big |
| Product weight | 0.8 kg |
| Filament type | ABS |
| Weight of empty spool | ~250 g |
| Spool diameter | 200 mm |
| Spool width | ~70 mm |
| Mounting hole diameter | 52 mm |
| Packaging | Cardboard with print |
| Package dimensions | 205x205x80 mm |
| Vacuum packaging | Yes |
| Moisture absorber | Yes |
Devil Design ABS+ filament 1.75 mm 0.8 kg - Black
Devil Design ABS+ filament with a diameter of 1.75 mm is especially recommended for those just starting their 3D printing adventure, as printing with this type of material is not complicated. What distinguishes the ABS+ versions produced by Devil Design is, above all, their high gloss and wide color availability.
Heat shrink material can be used to print both decorative models and various everyday items. It's also suitable for printing jewelry, toys, and accessories, making it exceptionally versatile.
What else is worth knowing about Devil Design ABS+ filaments?
The basic material parameters are as follows: Devil Design's ABS+ filaments stretch by up to 30% at break. They have a Rockwell R hardness of 94 (measured using the ASTM D785 method).
This thermoplastic material has a center of gravity of 1.04³ g/cm². Its softening point is 85°C. The filament's maximum tensile strength is 430 kg/cm² (according to the ASTM D638 standard).
Useful links |
