Pine64 minicomputers offer excellent computing performance and a number of possibilities not found in the vast majority of other models of SBC modules. While a significant number of popular minicomputers use microSD cards or (which is somewhat less common) optional eMMC modules as a "hard drive", the Pine64 series devices allow you to connect a full-fledged M.2 drive or one or two SATA3 drives. Expanding the computer with additional modules, however, is associated with a significant increase in power consumption. Therefore, Pine64 designers have provided for the possibility of powering the Quartz64 Model-A and ROCKPro64 modules with a powerful 12 V power supply. But how to choose the right power supply model for a specific application?
Aqara Single Switch Module T1 - No Neutral - white - SSM-U02
Index: BNA-23674
- Reduced price
- Promotion
Soldering station hotair and tip-based 2in1 Zhaoxin 852DH - 75W
Index: LUT-09834
- Reduced price
- Promotion
- Reduced price
- Promotion
Pine64 power supply
Products: 4
Loading...
Power supply 12V/5A - DC plug 5.5x2.1mm for ROCK64 minicomputers
Power adapter with DC connector 5,5/2,1 mm for a series of minicomputers ROCKPro64. The maximum capacity of the current is 5.0 A.
Index: PIN-13231
Index: PIN-13231
Power supply 5V/3A - DC plug DC 3,5mm for Pinebook and minicomputers ROCK64
DC plug 3.5 mm with a voltage of 5 V and a maximum current of 3 A. Ideal as a power supply for a series of the minicomputers Pine64.
Index: PIN-13229
Index: PIN-13229
Power supply microUSB Akyga AK-TB-06 5V/2,5A Raspberry Pi 3/2/B+
Adapter with microUSB tip compatible with minicomputer Raspberry Pi with maximum current performance of 2.5 A. It works with models 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero and Zero W....
Index: ZAS-07689
Index: ZAS-07689
Power supply 5V/3A - DC plug 3,5mm for ROCK64 minicomputers
DC plug 3.5 mm with a voltage of 5 V and a maximum current of 3 A. It has a set of interchangeable plugs for sockets EU, AU, US and UK. Ideal as a power supply for...
Index: PIN-12992
Index: PIN-12992
Pine64 power supply - current consumption and the presence of external devices
In a standard installation, the Pine64 minicomputer can work under the control of an operating system loaded on a microSD card or eMMC module. In this case, the current consumption of the minicomputer should not exceed 3 A - so this is the recommended current capacity of the 12 V power supply cooperating with the minicomputer. Before connecting, of course, pay attention to the correct polarity of the plug and its size - the socket on the PCB of the Pine64 Quartz64 Model-A or ROCKPro64 modules has a size of DC 5.5/2.1 mm. However, it is possible to connect additional disks to the minicomputer, communicating with the processor via the SATA3 interface (for this purpose, use a passive adapter, PCI-E, available in our offer in the category Accessories for Pine64). If you decide to choose this option or connect other "power-hungry" devices to the main module (M.2 SSD, displays powered by DSI, etc.), we strongly recommend using a more powerful power supply with a current efficiency of 5 A. The exceptions are Pinebook laptops, available in the offer of the same brand - the devices use power supplies equipped with DC 3.5/1.35 mm plugs and have different output parameters (5 A / 3 A).
Also check out our other accessories for Pine64 - among them you will find microSD cards, eMMC modules, PCI-E adapters for M.2 and SATA3 drives, as well as heat sinks, fans and high-quality housings. In separate categories you will also find a wide selection of cables and accessories necessary to work with minicomputers (USB mice and keyboards, micro SD card readers and many others).