In this category, we have collected overlays on the 3D printer's worktable that increase adhesion and proper temperature distribution over its entire surface. The accessory and the module are trivial for some, but it is difficult to overestimate its importance, because proper temperature control in the 3D printing process is an absolutely essential aspect. Smooth bottom of the printout, clean and level work surface, easy removal of the printed object without strenuous and delicate tearing off - All this means greater comfort of working with the 3D printer and the certainty that the workshop effort will simply not be wasted.
Filament Polymaker PolySonic High Speed PLA 1,75mm 1kg - Red
Index: PLM-23938
- Reduced price
- Promotion
Raspberry Pi CM4 Compute Module 4 - 1GB RAM + 8GB eMMC - CM001008
Index: RPI-18179
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Work table overlays and stickers
Products: 22
Loading...
Soft Magnetic Sticker with Creality logo - 235x235mm - for Creality Ender-3 Pro
Magnetic overlay with dimensions of 235 x 235 mm , which is a base for 3D printing. Dedicated to 3D printers, in particular to Creality Ender-3 Pro model. It is an original...
Index: CRL-19692
Index: CRL-19692
Smooth PEI printing platform for Creality K1 - 235x235mm
Original Smooth PEI overlay from Creality. The product measures 235 x 235 mm and is compatible with the K1 printer and other models with a similar workspace, including...
Index: CRL-23431
Index: CRL-23431
Platform Sticker Creality Ender-3
Self-adhesive overlay with dimensions 235 x 235 mm , which is a base for 3D printing. Dedicated to Ender-3 printers. It is an original part of the printer manufacturer,...
Index: CRL-15766
Index: CRL-15766
Removable build plate for Flashforge Adventurer 3D printer
Original, removable heating table overlay for Flashforge Adventurer 3 printer. Thanks to the proprietary print removal system, even models with a large adhesion surface can be...
Index: FFO-18645
Index: FFO-18645
Double-sided printing platform fo Creality 3D printers - 235x235mm
Original double-sided PEI overlay for 3D printer workbench from Creality. The platform is compatible with K1, Ender-3 S1, Ender-3 S1 Pro, Ender-5 S1 and Ender-3 V3 SE...
Index: CRL-23424
Index: CRL-23424
Universal double-sided printing plate for 3D printers with a working area of 235 x 235 mm from Creality . The matt PEI side is characterized by exceptional strength and...
Index: CRL-24530
Index: CRL-24530
- New
Universal double-sided printing plate for 3D printers with a working area of 235 x 235 mm from Creality . The matt PEI side is characterized by exceptional durability...
Index: CRL-24531
Index: CRL-24531
- New
Double-sided printing platform 235x235x1,2mm for Creality 3D printer
Double-sided cover with dimensions of 235 x 235 x 1.2 mm. Dedicated to the work tables of selected models of Creality 3D printers: Ender-3, Ender-3 Pro, Ender-3 V2, Ender-5,...
Index: CRL-20829
Index: CRL-20829
Spring steel sheet PEI - for 3D printers Prusa Prusa MK4, i3 MK3/S/+ and MK2.5/S - satin
Spring steel plate, coated with powder-coated PEI on both sides . It has a satin surface with fine texture. It is mounted on the magnetic heating table of the 3D printer....
Index: PSA-19938
Index: PSA-19938
Spring sheet for 3D printer Flashforge Adventurer 4
Hotbed overlay for Flashforge Adventurer 4 3D printer. The product is a sheet of flexible metal with an additional rough coating on which 3D prints are formed. On the sides...
Index: FFO-20926
Index: FFO-20926
Double-sided spring steel plate - for Snapmaker 2.0 A350 printers - textured
Double sided platform designed for Snapmaker 2.0 A350 printers with magnetic work table. It is made of thin spring steel . To attach the plate, simply place it on the workbench...
Index: SNM-19181
Index: SNM-19181
Upgraded Flexible PEI Heated Bed For Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender-5 Pro
Made of polyetherimide (PEI) overlay for the work table. The product has the dimensions: 235 x 235 mm . It fits, among others for the following Creality 3D printer models:...
Index: CRL-19749
Index: CRL-19749
Spring steel sheet with self-adhesive sheet of PEI - for 3D printers Prusa Mini+ - smooth
A spring steel plate covered on both sides with a self-adhesive, smooth PEI sheet . Designed for Mini+ 3D printer. The product is an original consumable part of the device...
Index: PSA-19935
Index: PSA-19935
Spring steel sheet - textured PEI for Prusa 3D printers
Exchangeable plate for Prusa 3D printers equipped with a magnetic work table. The removable washer is made of spring steel, which was covered with a PEI layer by powder...
Index: PSA-15070
Index: PSA-15070
The set includes original accessories dedicated to the Flashforge Adventurer 4 printer. There are two additional nozzles in it: 0.6 mm / 265 ° C and 0.3 mm / 240 ° C. The...
Index: FFO-21203
Index: FFO-21203
- Reduced price
- Promotion
Spring steel sheet - smooth PEI for 3D printers Prusa
Exchangeable plate for Prusa 3D printers equipped with a magnetic work table. The removable pad is made of spring steel covered with self-adhesive PEI sheet. The plate has a...
Index: PSA-15069
Index: PSA-15069
Spring steel sheet PEI - for 3D printers Prusa Mini+ - textured
Plate made of high quality spring steel, coated with powder-coated PEI on both sides . It has a textured (rough) surface. The product is an original consumable part of the 3D...
Index: PSA-19934
Index: PSA-19934
Spring steel sheet PEI - for 3D printers Prusa Mini+ - satin
The board is made of spring steel, coated with powder-coated PEI on both sides . It has a satin surface (slightly textured). It is mounted on the magnetic heating table of...
Index: PSA-19936
Index: PSA-19936
PEI printing platform for Creality CR-M4 - 470x485mm
Original cover made of spring steel , compatible with the worktable of the Creality CR-M4 3D printer. There is a magnetic layer on the back of the disc that ensures the...
Index: CRL-23417
Index: CRL-23417
Double-sided pritning platform - glass + PEI - for Snapmaker Artisan
Original worktable overlay designed for the Snapmaker Artisan 3in1 printer. The platform can be used on both sides. One side of the plate is glass and the other is made of...
Index: SNM-23448
Index: SNM-23448
Double-sided pritning platform - glass + PEI - for Snapmaker J1
Original worktable overlay designed for the Snapmaker J1 and J1s printer. The platform can be used on both sides. One side of the plate is glass and the other is made of...
Index: SNM-23446
Index: SNM-23446
Silicone mat for 3D printer mycusini 2.0 - 3pcs
A silicone overlay used in the mycusini 2.0 3D printer. The mat is placed on the working table of the device. The models are formed directly on it. The product is...
Index: MCI-21169
Index: MCI-21169
See also
- Sensors for 3D printers
- Thermistors for 3D printers
- Heaters for 3D printers
- Cables for 3D printers
- Fans for 3D printers
- Stepper motors for 3D printers
- Hotends and heating blocks
- Extruders
- Displays for 3D printers
- Motherboards for 3D printers
- Power supplies for 3D printers
- FEP foils
- Parts kits
- Hot beds
- Pneumatic connectors and PTFE tubes
- StepStick - stepper motor controllers
- Other elements
Glass for a 3D printer - compensation of curvatures and comfort
The 3D printer build table is where the magic happens - this is where the filament 3D prints are finally made. Could there be glass here instead of PEI steel known from legendary models such as the Prusa i3 MK3S+? Yes of course. Although it may seem like a lower quality or simply economical option, we have tempered glass with a carborundum coating, reinforced and more resistant to heat, which prevents the glass from deforming during printing. Equipped with mounting elements, the glass plate makes the use of the 3D printer more pleasant thanks to the ability to keep it clean and better adhesion. It happens that the print bed is crooked or the first layer of printing is slightly warped and unsightly - especially here additional leveling in the form of glass will work. Installation is usually very simple and safe thanks to the protected edges.
Plates and pads for 3D printers
Self-adhesive and mounted plates for 3D printers are another way to keep clean, improve adhesion and comfort of use. They cope well with most filaments, do not require glues or adhesive tapes and show high wear resistance. Among the plates and pads available in the Botland offer, you will find original accessories straight from the manufacturers of the 3D printing devices themselves, such as Creality, Snapmaker, Prusa, Flashforge, Zortrax or Anycubic. The material speaks for itself - it is usually stainless, hardened spring steel covered with a durable PEI thermoplastic. It makes the work surface flexible, durable and magnetic. Check out our selection of 3D printing accessories and choose something for yourself!