Bracket

Brackets for Pololu micro motors

In this category, you will also find special miniature DC motors with metal gears, which are produced by the well-known company Pololu. Such elements have been doing a great job for a long time and everyone who has dealt with the assembly of motors for robots, drones and similar constructions probably has experience working with Pololu accessories. The brackets for the Pololu micro motors are very durable, made of great components that will work flawlessly for decades. The product line of these tiny drives has, moreover, received several separate product series. They differ in performance both in terms of speed and torque. In this category, you will find recommended mounts of motors from the Pololu micro series, which are compatible with both HP (High Power), MP (Medium Power) and LP (Low Power) series models, as well as with HPCB series drives (high power motors with carbon brushes ). Please check the description of the given bracket carefully before purchasing to make sure it will fit your system. Depending on the requirements of the application, you can choose short and extended plastic fasteners, or solid aluminum clamps. We also have closed housings for motors from this popular series.

Brackets and mounting elements for stepper motors

Stepper motors require appropriate and solid mounting. Fortunately, in this category of Botland you will also find good accessories for this type of power unit. We recommend various types of brackets - strong angles made of steel or aluminum, which are compatible in terms of sizes with most of the stepper motors available on the market. For NEMA-14 motors we have L-mounts which you will find in the kit with M3 x 5mm screws. Larger NEMA-17 drives can be mounted using either aluminum or stronger steel brackets. The aluminum accessories in the free part of the arms have a number of small mounting holes. In this section, elements made of pure steel are equipped with two long holes that adjoin the motor axis in a parallel manner. There are no better or worse solutions here: it all depends on what type of engine you are looking for mounting parts. Nevertheless, this arrangement makes it much easier to adjust the position of the motor in the front-to-back direction, especially if it is to work with propellers. Structurally similar are the mounts of the NEMA-23 motors. Due to the high torques of this type of drive units, the steel engine mounts are equipped with brackets welded on the sides. As a result, these elements have an even higher level of rigidity and mechanical stability.

Other DC motor mounts and brackets

In addition to the standard brackets for robotics motors in this category, you can also purchase various other accessories. We recommend elements for mounting motors from other product lines. For 15.5D, 25D and 37D engines, it is worth choosing various types of clamps and brackets with appropriately profiled metal sheets. Such accessories should have numerous mounting holes. We also recommend solid aluminum mounts for 37D motors. These products are made of an aluminum plate with a thickness of 6.5 mm. As a result, the element is very durable, solid, has adequate stiffness and mechanical stability. It will be perfect for projects that use high torque engines. In turn, for people who are looking for mounting accessories for MT100 and MT90 engines, we recommend lightweight clamps and brackets, made in 3D printing technology with the use of gray PLA filament. Here you will also find mounts for the MT86 series motors and miniature drives with a diameter of 6, 7 or 8 millimeters. Choose what you need most.