The device that enables cutting or engraving on various materials, particularly in wood, leather, plastic, aluminum. In our range you will also find multifunctional devices to print on 3D technology, cutting with the use of the module with the CNC or laser.
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Laser cutting machines - engravers, plotters
Loading...
Working table - honeycomb - for CR-Laser Falcon
A set from Creality including a work table, a steel pad, non-slip feet and 12 pieces of spacers. The set is designed for the CR-Laser Falcon laser plotter.
Index: CRL-22552
Index: CRL-22552
Snapmaker 3D Printer v2.0 3in1 model A350T - laser module, CNC, 3D printing in enclosure
A set which includes Snapmaker A350T version 2.0 multifunction device and a chamber designed to increase safety while working with Snapmaker. The device is made entirely of...
Index: SNM-19367
Index: SNM-19367
- Sale
Spare blades for xTool M1 - 60° - 5pcs
A set of five spare blades for the xTool M1 cutter and engraver with a 60° angle made of tungsten steel. They can even handle thicker materials such as leather,...
Index: XTL-22187
Index: XTL-22187
- Sale
Working table - honeycomb - for Beamo laser engraving machine - 30W
Standard honeycomb workbench commonly used in CO2 laser machines. It is reinforced with internal rods and a strong outer frame. The filling is made of small meshes, which...
Index: FLU-18822
Index: FLU-18822
Working table - honeycomb - for Beambox laser engraving machine - 40W
The honeycomb work table is used in CO2 laser machines. The internal part of the table consists of a network of meshes resembling a honeycomb. Thanks to such construction the...
Index: FLU-18823
Index: FLU-18823
Spare blades for xTool M1 - 45° - 5pcs
Set of five spare blades for the xTool M1 cutter and engraving machine with an angle of 45 ° . They can be used when working with soft materials such as paper or vinyl.
Index: XTL-22188
Index: XTL-22188
FabricGrip adhesive cutting mat for xTool M1 - pink - 2pcs
Set of two reusable self-adhesive mats. Mounted inside the xTool M1 cutter and engraver, it evens out any minor irregularities and ensures perfect cuts. The dimensions of one...
Index: XTL-22408
Index: XTL-22408
Risers for xTool M1 - 41mm/62mm/92mm - 4pcs
A set of 4 pieces of pads enabling you to adjust the height of the xTool M1 plotter to the objects being processed. Each riser can be set in three different positions,...
Index: XTL-24456
Index: XTL-24456
IR laser module for FLUX Ador - 2W
The 2 W infrared laser module for the Ador plotter by Flux enables precise engraving on metals and plastics . Ideal for marking raw and coated metals . Thanks to the...
Index: FLU-25638
Index: FLU-25638
Colour printing module for FLUX Ador
The Flux Ador print module allows you to add vibrant colors to your designs thanks to its compatibility with CMYK eco-solvent inks. It supports printing modes: single color...
Index: FLU-25639
Index: FLU-25639
Eco Solvent ink for FLUX Ador printing module - 42ml - Magenta
Flux Magenta eco-solvent ink provides intense color saturation in projects created using the Ador plotter print module . It is ideal for printing on surfaces such as wood,...
Index: FLU-25641
Index: FLU-25641
Reflecting mirror - for laser machines with a CO2 laser source - 20x3mm
Reflecting mirror is used to reflect laser beam in laser machines with CO2 laser source. Made of molybdenum, diameter 20 mm and thickness 3 mm . The reflection value is 98%.
Index: FLU-18821
Index: FLU-18821
Rotation module Two Trees for laser engraver
Two Trees rotation module designed for laser plotters. It enables the engraving of cylindrical objects (e.g. rollers, cans). Thanks to the precise drive mechanism, it...
Index: TRS-21075
Index: TRS-21075
- Sale
- SPECIAL OFFERS
Air Assist - air pump for xTool M1
Air pump compatible with the xTool M1 plotter, which helps keep the work surface clean and protects the laser lens, which significantly improves the cutting quality . The...
Index: XTL-24748
Index: XTL-24748
Focusing lens - for laser machines with a CO2 laser source
Focusing lens for laser machines with CO2 laser source. It is made of zinc selenium ZnSe which guarantees excellent optical properties and reduces laser losses. It is...
Index: FLU-18820
Index: FLU-18820
An innovative rotary module designed to work with the xTool M1 plotter, enabling engraving on cylindrical objects . RA2 Pro can be easily adapted to various shapes and...
Index: XTL-24471
Index: XTL-24471
Cutting and engraving work table - honeycomb - 350x350mm - Two Trees
Two Trees ' high-quality work table, measuring 350 x 350 x 22 mm , is designed specifically for use with laser cutting and engraving machines. Its honeycomb structure...
Index: TRS-25447
Index: TRS-25447
- Sale
Spindle for CNC milling machine TTC-450/TTC-450 Pro - 800W/10000-30000rpm - Two Trees 210106243
The Two Trees CNC router spindle is an efficient and precise tool for wood and wood-based materials . With a powerful 800 W motor, adjustable speed from 10,000 rpm to...
Index: TRS-25843
Index: TRS-25843
- Sale
- SPECIAL OFFERS
FLUX Beam air filter for laser cutters - 100 mm
FLUX Beam air filter for laser cutting and engraving machines with an air outlet diameter of 100 mm . It is compatible among others with Beamo, Beambox and Beambox Pro...
Index: FLU-18816
Index: FLU-18816
xTool Desktop Smoke Purifier - air purifier for xTool F1/M1 Ultra
The xTool Desktop Air Purifier is the perfect solution for laser artists who want to work in a comfortable and safe environment . The device is fully compatible with the...
Index: XTL-27065
Index: XTL-27065
Accessory kit for xTool RA2 Pro rotary module
The xTool RA2 Pro Rotary Module Accessory Kit significantly expands the machining capabilities of cylindrical and irregular workpieces . It includes an angle module, a...
Index: XTL-27066
Index: XTL-27066
xTool SafetyPro AP2 V1.0 - air purifier with SuperCyclone system for xTool devices
The professional xTool SafetyPro AP2 air purifier is an advanced device supporting safe laser work. Its 6-stage SuperCyclone filtration system effectively eliminates dust,...
Index: XTL-27067
Index: XTL-27067
xTool SafetyPro IF2 V1.1 - smoke extraction system for xTool laser plotters
The xTool SafetyPro IF2 is a modern, compact, high-airflow duct fan designed specifically for xTool lasers . Equipped with two turbocharged fans that run at up to 16,000...
Index: XTL-27068
Index: XTL-27068
Replacement filter for xTool AP2 SafetyPro air purifier - pre-filter
The pre-filter for the xTool SafetyPro AP2 air purifier is the first line of defense against pollution. It traps up to 90% of particles visible to the naked eye , such as...
Index: XTL-27069
Index: XTL-27069
Laser cutting machines
Laser cutting machines are devices gaining similar popularity to 3D printers. Increasingly, electronics manufacturers produce equipment that combines both functions. This is because the work tool movement system (applying the filament or sending the laser beam) needed for both devices is the same. A laser cutter is a tool that can precisely and efficiently cut specific shapes and patterns. Such equipment is usually used in factories for industrial use, but increasingly it also finds its place in ordinary homes. Well-designed cutting machines are able to work on many types of materials - for example wood or metal.
What do we offer in this category?
Our offer includes, among others, high-quality desktop laser cutters that will be able to independently detect the type of material to be processed and then, based on this data, select the parameters of the laser beam. It is very important that when cutting, the device uses a beam that will also be able to burn fragments of the material, but the high temperature generated near the area being processed will not have a negative impact on the surface of the material. For example, using the same power of the light beam to cut metal and plastic will result in unsightly distortions of the plastic surface.
Desktop laser cutting machine
One of our products is a laser cutting machine that independently adjusts the parameters of the laser beam - power, speed and height. The product is called Makeblock Laserbox Pro and can cut and engrave materials such as paper, corrugated paper, wood, acrylic, canvas, denim, leather, base, plate, ABS, PET tiles, rubber, veneer, veneer, cork, sandpaper, food , fiberglass, plastic and many others. The device is equipped with a number of intelligent systems that operate, among others, thanks to a built-in high-quality camera. The cutter is able to independently recognize hand-drawn drawings and then cut them out or mark their contours. You can easily cut or engrave the shapes proposed by the device, or use your own files. The equipment informs about the current status of the task being performed, warns against possible overheating (protecting the equipment against self-damage), adjusts the speed of the fume absorber depending on the speed of their release, and if the cover is opened, the device immediately stops operation. The cutting machine also has a number of certificates proving a high level of safety. It is worth noting that the model is perfectly adapted to work with children - among other things, it comes with 15 specially prepared lessons that can be conducted at school or at home.
Cutting machine with 3D printer
The tool movement system used in 3D printers (in all directions on the plane and up and down) can also be used to operate a laser cutter. That is why it often happens that manufacturers of such devices combine the properties of both tools in one device. An excellent example is the Dobot Mooz 2 Plus 3D printer - a tool enabling 3D printing, a precision CNC tool module and a 1.6 W laser engraver module can be alternately mounted to the metal structure.
Laser cutters and plotters - FAQ
A laser cutting machine is a device designed for cutting and engraving various materials, such as wooden plywood , paper, plastics, leather or even metal and glass.
An automatic laser burner for wood or paper in the simplest version costs several hundred zlotys. Devices designed to work with more complex materials (metal, glass) and models that support more functions (e.g. data transfer in the cloud) are more expensive.
Kimla fiber lasers are devices that allow for easy and quick cutting of steel sheets and other hard materials. The cost of a professional machine tool with such a laser is at least several dozen thousand zlotys, but there are many companies on the market that offer commercial Kimla laser cutting services.
A good quality CNC laser module itself costs from several hundred zlotys and up. Basic laser machines are available at a slightly higher price.
There are three basic types of plotters: image-applying (inkjet, laser, solvent), cutting (roller, drum) and engraving (mechanical, laser). All devices of this type are computer-controlled and designed to work with large, flat surfaces made of paper, foil, fabrics and other materials.
Cutting plotters are designed for cutting shapes from various soft materials, for example foil or paper sheets. They are used, for example, in printing houses and offices.
CAD prints can be created on any large-format plotter that offers sufficient quality and supports appropriate file formats. Popular devices on the market include Canon, HP and Epson.
The design of plotters varies depending on the functions they offer, but basically each device of this type has a frame structure with a paper or other base material tray, a drum or roller sheet feed system (except for flatbed plotters) and a head (printing, cutting or engraving). .