SenseCAP M1 SD Card Replacement Kit - Seeedstudio 114992729
Index: SEE-22567
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Filament Rosa3D Refill PLA Magic Silk 1,75mm 1kg - Gold-Silver
Index: ROS-24206
- Reduced price
- Promotion
Minicomputer UP Squared V2 4GB RAM + 32GB eMMC Intel Celeron N6210
Index: AAE-24034
- Reduced price
- Promotion
- Reduced price
- Promotion
Postprocessing and filament merging systems
In this category you will find products designed for processing finished prints and for combining filaments before they get to the extruder. In Botland shop assortment you will find a wide range of 3D printers, filaments, as well as devices whose main task is the post-processing of 3D printing. In this category we also offer professional systems for joining heat-shrinkable materials. We offer only products of reputable companies with years of experience in the market, such as Prusa, Creality, Mosaic, Sunlu, Anycubic, Zortrax and others.
Products: 18
Loading...
Sunlu FilaDryer S4 - filament dryer
The FilaDryer S4 filament drying system from Sunlu is designed to provide good storage conditions for printing materials. Enables precise control of humidity in the chamber....
Index: SLU-24924
Index: SLU-24924
Creality Filament Dry Box - filament drying system
Creality Filament Dry Box is a device whose task is to properly dry the filament before printing. Proper preparation of thermoplastic allows to obtain better quality 3D...
Index: CRL-20070
Index: CRL-20070
Sunlu UV Resin Curing Box - for drying and curing resin prints - Sunlu
A device manufactured by Sunlu designed for final processing of 3D prints that were made of resin . The model printed from resin is very sticky, because this material has a...
Index: SLU-19933
Index: SLU-19933
- Reduced price
- Promotion
Sunlu FilaDryer S2 - filament dryer
Sunlu device, enabling the appropriate preparation of the filament for the printing process. The main task of the FilaDryer S2 is to remove moisture that may accumulate on...
Index: SLU-20878
Index: SLU-20878
Ultrasonic cleaner Sunlu SL-UC01
Ultrasonic cleaner from Sunlu with a capacity of 2.7 L for precise cleaning of various items such as jewelry, glasses, as well as 3D resin prints . It offers three power...
Index: SLU-24925
Index: SLU-24925
Device for washing and drying prints - Anycubic Wash Cure Plus Machine
The device used for final processing of 3D prints made of photosensitive resin. It has two modes of work: washing and drying . Final curing of the model is done by uniformly...
Index: ANY-20658
Index: ANY-20658
- On sale!
- Promotion
Print drying and curing device - Sunlu RC-2
Advanced device for processing 3D models from resin. Thanks to its spacious chamber , it allows for simultaneous curing of larger models or several smaller ones. Equipped with...
Index: SLU-24926
Index: SLU-24926
Print washing and drying device - Anycubic Wash Cure 3
A device from Anycubic designed for washing and drying models made of photosensitive resin. The top cover provides effective protection against UV radiation, and the...
Index: ANY-24255
Index: ANY-24255
Creality Resin Tool Kit for 3D printer
A set of tools necessary to work with resin 3D printers. The package includes a plastic spatula, brush, funnel made of stainless steel, silicone funnel, PVC gloves and a...
Index: CRL-21831
Index: CRL-21831
Creality Space Pi - filament drying system
Space Pi is an advanced filament drying system from Creality . The device uses PTC heater technology that circulates air in a 360-degree range, which guarantees even...
Index: CRL-24535
Index: CRL-24535
Nebulizer for Polysher - 2pcs - Polymaker PM70801
Two replacement nebulizers for the Polymaker Polysher . The nebulizer is responsible for transforming liquid isopropyl alcohol (IPA) into a fine mist and atomizing it in...
Index: PLM-22751
Index: PLM-22751
Smoothing device - Polymaker PM70524
A small, intelligent device used to smooth the surface of the finished print, made of PolySmooth filament by Polymaker. The produced mist of isopropyl alcohol (IPA) gently...
Index: PLM-22750
Index: PLM-22750
Original Prusa Curing and Washing Machine CW1S
Original Prusa CW1S is a device recommended for Prusa SL1S 3D printer , but it is also compatible with other SLA printers available on the market. CW1S is a multifunctional...
Index: PSA-19820
Index: PSA-19820
Sunlu FilaDryer S1 Plus - filament dryer
The Sunlu FilaDryer S1 Plus drying system is a device which allows you to prepare any filament for printing in a convenient and quick way. FilaDryer S1 Plus has been built...
Index: SLU-18114
Index: SLU-18114
Device for washing and curing prints - Anycubic Wash & Cure 3 Plus
A device from Anycubic designed for washing and drying models made of photosensitive resin. It offers a large working area , so it can wash and harden large prints or...
Index: ANY-24256
Index: ANY-24256
Device for washing and curing prints - Anycubic Wash & Cure Max
An advanced device from Anycubic for washing and hardening 3D prints made of photosensitive resin. It is characterized by a large capacity of 14.9 L , enabling the processing...
Index: ANY-24257
Index: ANY-24257
- EOL
Creality Space Pi Plus - filament drying system
Space Pi Plus is an advanced filament drying system from Creality. The device uses dual PTC heater technology that circulates air in a 360-degree range. Equipped with an...
Index: CRL-24528
Index: CRL-24528
See also
3D print post-processing - the most important information
To achieve perfect quality of 3D prints, sometimes they need additional processing. For this purpose, special equipment using various technologies to improve the appearance of 3D prints is used.
- In the case of elements made of resin, equipment working in two modes - drying and washing - works great. In addition, this type of equipment final harden the printout by uniform exposure to ultraviolet waves. An extremely practical function is the regulation of the immersion level, thanks to which you can continuously control the progress of the printout washing.
- The vapour smoothing device, on the other hand, as the name suggests, uses vapour to remove any irregularities and roughness in the print surface. The device automatically selects not only the pressure, but also the temperature and density of the vapour. In practice this means that all prints, even the most complicated ones, will be evenly smoothed.
Post-processing of 3D prints is also based on the effective removal of the so-called support structures, which were formed from the material type Z-SUPPORT.
Devices for permanent bonding of filaments
In order to quickly and, above all, permanently connect the heat-shrinkable material, special systems are used, which do not cause any delays during the work of the 3D printer. Such a solution makes it possible for devices equipped with only one nozzle to print in different colors. Thanks to the equipment for combining filaments you will also create practical supports.
- We offer universal devices which work with all printers using 1,75 mm diameter filament. The proposed devices can be successfully used for the most popular types of heat-shrinkable materials.
- We also offer devices which use IPA fluid for cleaning printouts. The use of high quality materials, such as stainless steel, guarantees a long life of the equipment. Thanks to the work time counter you know exactly how long a particular printout is subjected to the cleaning process. IPA, or isopropyl alcohol, effectively removes all resin residues that are in hard to reach places. Proper precautions must be taken when working with liquids of this type.
Models are also available that allow the use of up to 8 different filaments, so that the print will gain a variety of colors. Operation of the device is easy and intuitive, so even novice users can successfully use it. Before starting a project, the equipment must be set up properly. In practice, this means that you need to select one of the loaded shrinking materials, and the device will automatically cut the filaments to a specified length.
Filament blending - additional information
Also worthy of special attention are devices that allow you to permanently and solidly combine different types of filament. This functionality allows you to create complex prints characterized by high detail. In case of any questions concerning post-processing devices or combining of filaments we encourage you to contact us. Our experienced staff will be happy to dispel any doubts and help in the selection of equipment that will meet your expectations in 100%. We provide a contact form, e-mail address and telephone number.