Creality replacement parts
Creality nozzle 0,4mm - filament 1,75mm - copper
Original Creality nozzle . Intended for use in hotends of a few selected models of 3D printers from the Ender-3 and CR series (the full list below). The product is made of...3D printer Creality Sermoon V1 Pro XY-axis limit switch kit
XY axis limit switch, protecting against exceeding the maximum travel range. Used in Sermoon V1, Sermoon V1 Pro and Sermoon V2 3D printers. The sensor is mounted on a PCB ,...- Reduced price
- Promotion
Nozzle 0,4 - filament 1,75mm - brass
Original nozzle from Creality. It is compatible with the hotends found in Creality's Ender-3, Ender-5, CR-6 series 3D printers and can also be used in: Ender-6, CR-10, CR-10...3D printer Creality Sermoon V1 Pro Z-axis limit switch kit
Z axis limit switch used in Sermoon V1 and Sermoon V1 Pro 3D printers. The sensor is mounted on a PCB , on which there is also a soldered connector and two mounting holes...- Reduced price
- Promotion
Limit switch - endstop - for 3D printers - Creality
A limit switch (Endstop) is a component used in 3D printers to stop moving parts of the system - such as carriage or table movements. It also detects when the X, Y or Z axes...Set of two Creality pneumatic connectors - 2.5mm and 4mm
Set of two pneumatic connectors used in the following models of Creality 3D printers: Ender-3 V2, Ender-5 Pro, CR-30, Ender-5 Plus, Ender-6, Ender-2 Pro, Ender-3, Ender-3...Filament detector cable for Creality Ender-3 S1 3D printer
Filament sensor cable , approx. 73 cm long. Both sides ended with plugs with different rasters. The product is used in the Creality Ender-3 S1 3D printer. It is an original...Rigid clutch for Creality 3D printers - 1pcs
A durable, high- quality aluminum rigid coupling installed on the shaft of a stepper motor in 3D printers. It is the connection between the motor and the trapezoidal screw. It...3D printing glass bed - 235x235mm
A 3D printer accessory in the form of a 235 x 235 mm glass with a thickness of 4 mm , suitable for the work tables of printers such as Creality CR-6 SE . 4 mounting clips...3D printer CR-200B limit switch
Limit switch module used in Creality CR-200B 3D printer. The product consists of the actual limit sensor and plug - soldered into the board . It is an original printer...- On sale!
- Promotion
Nozzle Thermistor for Creality Ender-3 S1 3D printer
Nozzle thermistor used in the following Creality 3D printer models: Ender-3 S1 and Ender-3 S1 Plus. The product is an original spare part of the Creality brand. The length...Hotbed Thermistor for Creality Ender-3 3D printer
Heating table thermistor used in Ender-3 3D printer. The product is an original replacement part of the printer manufacturer, Creality. The length of the thermistor cable with...Hotbed thermistor for Creality 3D printer
Heated bed thermistor used in the following Creality 3D printer models: Ender-3 S1, CR-6 Max, CR-6 SE, CR-10 Smart Pro, CR-10 Smart and Ender-7. The thermistor is responsible...- Reduced price
- Promotion
Spring for the hotbed of Creality 3D printers - 4pcs
Four pieces of shock absorbing springs improve the stability and precision of 3D printers. The springs are universal and compatible with various models of Creality printers....Filament sensor - for Ender-3 V2 3D printer - Creality
The filament sensor is compatible with Creality Ender-3 V2 3D printer. The component is an original part used by the printer manufacturer, Creality. Its purpose is to...Bigtreetech SKR Mini E3 V3.0 motherboard for Creality Ender 3/Ender 3 Pro/Ender 5/ CR-10 3D printers
The SKR Mini E3 V3.0 motherboard from Bigtreetech is designed for Creality 3D printers: Ender 3 / Ender 3 Pro / Ender 5 / CR-10. Equipped with the STM32G0B1RET6 /...AI camera for Creality K1 3D printer
An intelligent camera designed for installation in the K1 printer from Creality. It enables continuous monitoring of the printing process in real time . The camera can be...Platform Sticker Creality Ender-3
Self-adhesive overlay with dimensions 235 x 235 mm , which is a base for 3D printing. Dedicated to Ender-3 printers. It is an original part of the printer manufacturer,...Elastic steel plate kit for Creality Sermoon V1 Pro 3D printer - 185x185mm
Original Creality cover on the heating table. Used in the following 3D printer models: Sermoon V1, Sermoon V1 Pro. The product is made of flexible steel sheet with a one-sided...Heating block Creality Ender-3 and CR-10S
Heating block which is a part of hotend head in Ender-3 and CR-10S 3D printers. This is an original product of the printer manufacturer, Creality. Block measures 20 x 20...Spool holder for Creality 3D printer
Durable filament spool holder. It is compatible with most models of Creality 3D printers, including Ender-3 series, CR-6 SE, CR-6 Max. The product was made of durable material...nFEP film for Creality 3D printers - 220x180mm
High-quality film mounted on the bottom of the tank in resin printers. It is used to transmit as much UV light as possible, necessary to cure the resin. nFEP film is very...PEI printing platform for Creality Ender-5 S1 - 235x235mm
Plate for the build plate for the Ender-5 S1 printer. This is an original Creality product. The overlay is made of polyetherimide (PEI) , thanks to which it is characterized...See also
Creality spare parts - guarantee of originality
Botland store as an official Creality distributor guarantees access only to original accessories and spare parts. Thanks to products from this category you will keep your device in perfect technical condition for a very long time.
- We offer sets of components compatible with different models of printers. Creality spare parts kits may include, among others, limit switch module, toothed belts, screws, nuts, guide rolls, nozzles, thermistors and heating tubes. In addition, they include brass pneumatic connectors, clamps, male housing pins, tubes for filament feed, hotend heads and various connector wires. With such a wide selection, no matter which components are worn out, you will be able to replace them with new ones.
- For proper operation of the 3D printer you need a working automatic table leveling sensor, which you will also find in the offer of Botland store.
Investing in original spare parts supplied by a reliable supplier, you can be sure that you will receive a fully functional product, characterized by high quality and long life.
What other Creality spare parts can you find in our assortment?
In the Creality spare parts category you will find filament sensors, whose main task is to ensure that the shrinking material is supplied continuously. We also offer solid and durable heating blocks made of high quality aluminum.
- In Botland shop you will find heat sinks for hotend responsible for effective heat distribution.
- We offer efficient mounting power supplies characterized by high current efficiency. Creality power supplies are equipped with both overload and overvoltage and short circuit protection.
- We offer complete motherboards for popular models of 3D printers signed with Creality logo.
- You will find efficient fans with two leads ended with a plug.
- Particularly noteworthy are adapters, which offer the possibility of safe connection of various components to 3D printers using ribbon cables.
The assortment of our shop is systematically expanded, so you can easily find the Creality spare parts you need.
Other components for Creality printers
In our offer you will find a heating table that ensures rapid heating of the work surface. Moreover, we prepared efficient stepper motors characterized by long life, even in case of intensive use.
- Thanks to magnetic overlays printed elements precisely adhere to the substrate. It is especially important in the first phase of printing. We offer overlays designed for popular Creality 3D printers.
- If you want to expand the capabilities of devices used for 3D printing, it is worth getting interested in the Wi-Fi module. With modules compatible with Creality printers you can remotely manage and change the settings of the connected device.
- Another spare part is a mounting stand with a built-in filament sensor. In a situation when the filament runs out or is interrupted, the sensor will detect this event and immediately stop the operation of the device.
Besides the mentioned components we also offer transmission belts, solid and durable brackets, covers equipped with a temperature and humidity sensor and a set of spare parts for the extruder. If you have any questions, feel free to contact our advisors, who will be happy to help you choose a specific spare part or set.