The appearance on the market of the servos changes the engineer production automation and many other industries. At a later time, there was a miniature servos for modeling, which have also become popular among designers of robots and various vehicles with a remote control. Except serwomechanizmami, the store Botland you will find the necessary equipment , and various other useful accessories for feeding, such as branched wires, brackets and orczyki.
- Reduced price
- Promotion
- Reduced price
- Promotion
Loading...
Index: KAB-00647
Index: KAB-01387
Extension cord for servos 13,5cm
Extension cable for servos with the length of 13,5 cm.
Index: KAB-01386
Index: KAB-01386
Extension cord for servos 15cm twisted
Extension cable with the length of 15 cm ended with the standard plug for the servos. It has twisted cables.
Index: KAB-01718
Index: KAB-01718
Round aluminum servo horn - 20mm / 6mm
Aluminum servo horn with a diameter of 20 mm and the mounting hole 6 mm. It is circular in shape. Works with standard servos. The set also includes mounting screws.
Index: GRL-12538
Index: GRL-12538
Index: KAB-00648
Extension cord for servos 45cm twisted
Extension cable with the length of 45 cm ended with the standard plug for the servos. It has twisted cables.
Index: KAB-01717
Index: KAB-01717
Extension cord for servos 90 cm - twisted
Extension cable with the length of 90 cm ended with the standard plug for the servos. It has twisted cables.
Index: KAB-08863
Index: KAB-08863
Splitter Wire for Servos Y - 15 cm (JR)
Wire splitter for servos with length of 15 cm. The wire allows you to connect two servos to one input of the controller.
Index: KAB-01388
Index: KAB-01388
Splitter Wire for Servos Y - 30 cm (JR)
Wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.
Index: KAB-01389
Index: KAB-01389
Aluminium Servo Mount Feetech FK-MB-001 - black
Aluminum servo mount in size 58 x 37 x 25 mm and weighing 15 g.
Index: FTC-09208
Index: FTC-09208
Aluminum servo horn 35mm / 6mm
Aluminium servo horn with length of 35 mm and a diameter of the mounting hole 6 mm. It has a shoulder in ranodom colour. Working with standard servos.
Index: GRL-12539
Index: GRL-12539
Pan / Tilt standard servo mount
Metal mount enables creating platforms, controlled by servos. A kit for self-assembly allows you to build, for example, a rotating camera stand for face tracking. The kit...
Index: AKS-13500
Index: AKS-13500
Aluminum servo mount in size 58 x 37 x 25 mm and weighing 15 g. Suitable for servo MG995.
Index: GRL-10912
Index: GRL-10912
Splitter Wire for Servos Y - 60 cm (JR)
Wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.
Index: KAB-01390
Index: KAB-01390
Pan/Tilt Servo Bracket Kit + Servos - Dagu
Metal mount enables creating platforms controlled by servos. A kit for self-assembly allows to build, for example a rotating camera stand for face tracking. The set includes...
Index: DGU-02546
Index: DGU-02546
Micro Pan/Tilt Servo Bracket + Servo - Dagu
Metal mount enables creating platforms controlled by servos . A kit for self-assembly allows to build, for example a rotating camera stand for face tracking....
Index: DGU-02547
Index: DGU-02547
Feetech FS5103R-W - Servo Wheel
A wheel with a diameter of 70 mm and a width of 10 mm, it is covered with rubber. It is designed for standard servos.
Index: FTC-09171
Index: FTC-09171
Splitter Wire for Servos Y - 30 cm twisted (JR)
Twisted wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.
Index: KAB-03091
Index: KAB-03091
Aluminium servo horn Feetech FK-AP-034 15T - 25x6mm
Feetech aluminium ploughing with a diameter of 25 mm and a height of 8.5 mm. The mounting hole has a diameter of 6 mm and number of teeth 15T. The round barrel is compatible...
Index: FTC-15918
Index: FTC-15918
RX30 10V/2200 µf with servo cable
Electrolytic capacitor 2200 µF / 10 V to filter the servo control signal. It has a 3-pin servo plug connected to the controller. Size: Ø10 x 25 mm
Index: KAB-07916
Index: KAB-07916
- On sale!
- Promotion
Standard Servo Mount - Pololu 3435
Plastic mount for standard servos, provides a convenient mount for servos on a flat surface. Mount in black.
Index: PLL-12987
Index: PLL-12987
Grove - servo splitter - 20cm - 5pcs
A set of five Grove cables to connect e.g. Base Shield v2 to servers, actuators, sensors or devices with a Grove connector. Each one is 20 cm long and consists of a 4-pin Grove...
Index: SEE-14987
Index: SEE-14987
Aluminum servo horn PowerHD Arm D 35mm / 6mm
Aluminium PowerHD black servo barrel, dimensions 35 x 15 x 5 mm . The mounting hole has a diameter of 6 mm, number of teeth is 25T. It has two screws for adjustment....
Index: PHD-15755
Index: PHD-15755
Universal holders for mounting servos in various sizes
Since all components containing moving mechanical elements, as well as the servos require appropriate fasteners. On offer are Botland specially designed brackets for mounting servos are available in various shapes and have a large number of holes that allows simple installation of servos and other components, as well as very good will start following where the design of each robot or vehicle with a remote control. Mounting brackets made of anodized aluminium and painted with black powder paint and decorated in a reliable and very solid construction. There are also a platform on which to build driven services platform for mounting a camera to track faces.
Useful accessories to extend the functionality of the servos
If the design of Your robot or airplane with remote control reaches colossal dimensions, and to control some of its components, requires the use of two servos operating in parallel, a very useful addition to the cable is branched, by which you can connect two serwomechanizmy to one output driver. The range of shops available Botland wire branched Y-type with length from 15cm to 60cm. In addition, to ensure the stability of the voltage to the servos and to eliminate distortion of a control signal, you can connect the capacitor with the selected standard output, allowing you to connect to the power supply. We also offer orczyki compatible with services such as "standard" in different lengths and different system holes for installation sockets.