BLS connectors are a family of multi-pin connectors with a 2.54 mm raster. They are installed on cables and dedicated to connect to goldpins. Due to their easy installation, low price and wide selection of available connectors, they are readily used in electronics to connect systems and individual components in a device. Because these types of connectors can be plugged into goldpins, they are ideal for prototype devices, where goldpins are often used as outputs for development modules.
BLS connectors
Female pin for case raster 2.54mm 10pcs
A set of ten female pins in a case with the pitch of 2.54 mm.Male pin for case socket raster 2.5mm 10pcs
A set of ten male pins in a case with the pitch of 2.54 mm.BLS connector - 4x1 socket - 5pcs.
The socket for the cable of the BLS type, pitch of 2.54 mm. The set includes 5 slots of 4x1.BLS connector - 3x2 socket - 5 pcs
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 3x2.BLS connector - 4x2 socket - 5 pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 4x2.BLS connector - 1x12 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 1x12 sockets.BLS connector - 10x2 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 10x2 sockets.A set of BLS connectors and pins for the construction of the socket - justPi - 620 elements
Set of BLS connectors and male and female pins for socket construction . Contains over 600 components designed to be installed at the ends of wires and dedicated for...BLS connector - socket 2x1 - 5pcs
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 2x1.BLS connector - 2x2 socket - 5 pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 2x2.BLS connector - 5x1 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 5x1 sockets.BLS connector - 6x1 socket - 5pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 6x1.BLS connector - 1x16 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 1x16 sockets.BLS connector - 1x1 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 1x1 sockets.BLS connectors - 5x2 socket - 5pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 5x2.BLS connector - socket 8x1 - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 8x1 sockets.BLS connector - 3x1 socket - 5 pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 3x1.BLS connector - socket 8x2 - 5szt.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 8x2.BLS connector - 1x10 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 1x10 sockets.See also
- Connectors - goldpin
- Pogo Pin
- Electric cubes
- Quick couplings
- DC plugs and sockets
- BNC connectors
- ARK connectors
- D-SUB connectors
- Connectors - FSF / FPC ZIF
- Amphenol FCI connectors
- Banana connectors
- Crocodile cables
- Connectors - 4-pin
- RJ network connectors
- USB connectors
- Jumpers
- Wire tips
- SMA connectors
- Mounting connectors
- Connectors - raster 2.5 mm
- Connectors - raster 2.54 mm
- 230 V network sockets
- IDC connectors
- Slip connectors
- Molex connectors
- Connectors
Convenient to install goldpin connectors
Connectors in electrical and electronic systems are always a critical part of the system. Designing this aspect of the device must take place on many levels. Electrical requirements are important, such as the number of lines in the connector, as well as the maximum allowable voltage and amperage that the current flowing through it can have. Equally important are the mechanical requirements - the force needed to pull the connector apart, the type of lock (if any), and the strength, i.e. the maximum number of cycles to connect and disconnect the connector. BLS connectors are an excellent compromise on many of these issues, while being low cost. These connectors are capable of operating up to 250 volts and up to 1 amp. This much should be sufficient for most applications. The 2.54 mm raster - compatible with common 0.1" goldpins - is extremely versatile.
Easy crimping of terminals on cables
The metal connectors of the BLS connector are installed on stripped cable ends and crimped with a special tool. These pins come in two types - male and female, depending on the type of connector you want to put them in. Tool crimpers for BLS connectors are inexpensive and widely available, which distinguishes this type of connector from other types of connectors, which often feature expensive and complicated terminal crimpers. Once the pins are crimped onto the cables, they are placed into the connector housing where they are automatically snapped into place.
Wide selection of BLS connectors of different sizes
In our store you can find BLS connectors of different sizes and types. There are male and female connectors available, so it is possible to connect with typical goldpins on PCB as well as sockets with female pins. Housings for connectors are compatible with both types of pins. Botland store offers connectors with different number and configuration of pins. The smallest connector has two pins, and the largest have up to 32 pins. BLS connectors are produced in single and double row versions.