Lining equipped with keyboards and displays have many practical uses in different applications, but it may seem that they are only available for Arduino. However, the designers of the modules for embedded systems thought about a similar solution also for Raspberry Pi, located under the name Raspberry Pi Hat. The assortment of our store, you will find a wide choice of nozzles with przyciskowymi interfaces and LED displays, OLED or E-paper dedicated to the Raspberry Pi. Simple installation, as well as specialized software libraries let you quickly launch pads.
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
AZO Digital Step-Down Voltage Regulator PE-45 - 24/13,8V 500W
Index: AZO-10232
- Reduced price
- Promotion
Bluetooth 4.0 BLE module - HM-10 / AT-09 - MLT-BT05 - 3.3V / 5V
Index: MOD-09515
- Reduced price
- Promotion
- On sale!
- Promotion
Raspberry Pi Hat - keyboards and displays
Products: 24
Loading...
Shield for Raspberry Pi with e-paper display of 2.13 " with a resolution of 250 x 122 px. It is connected directly to GPIO pins.
Index: WSR-09097
Index: WSR-09097
OLED 1,3'' 128x64px module for Raspberry Pi 4/3+/3/2/Zero - Waveshare 13890
Shield for Raspberry Pi and Jetson Nano with blue OLED display with a diagonal of 1.3" and a resolution of 128 x 64 px. The screen is based on SH1106 driver, it communicates...
Index: WSR-10752
Index: WSR-10752
Screen - LCD 1,44'' 128x128px SPI - HAT for Raspberry Pi 4/3+/3/2/Zero - Waveshare 13891
Shield for Raspberry Pi with TFT LCD display of 1.44" and a resolution of 128 x 128 px. Screen based on ST7735S driver , it communicates through the SPI bus. Additionally, on...
Index: WSR-10753
Index: WSR-10753
NeoKey - key matrix for switches - 76.5 x 21.5 x 4.6 mm board manufactured by Adafruit. It has space for four buttons , including the Kailh socket. Thanks to them, you can...
Index: ADA-19789
Index: ADA-19789
Display HAT Mini - HAT with IPS LCD 2'' 320x240px for Raspberry Pi - PiMoroni PIM589
The Display HAT Mini from Pimoroni is a display overlay designed for any 40-pin version of the Raspberry Pi. The bright, 18-bit , 2" IPS display with a resolution of 320 x...
Index: PIM-20895
Index: PIM-20895
E-paper E-Ink flexible display (D) 2,13'' 212x104px HAT for Raspberry Pi - Waveshare 15084
Shield for Raspberry Pi with a flexible display e-paper of 2.13 " with a resolution of 212 x 104 pixels. It is connected directly to GPIO pins. It communicates via SPI...
Index: WSR-13457
Index: WSR-13457
Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...
Index: PIM-10620
Index: PIM-10620
E-paper of 2.13" 250x122px display (no module) for overlays for the Raspberry Pi - Waveshare 12672
The display of type of e-paper with a diagonal of 2.13 " and a resolution of 250 x 122 px. It is designed to use with shield for Raspberry Pi. It communicates via the SPI...
Index: WSR-09102
Index: WSR-09102
E-paper E-Ink 7.5'' 800x480px - display with HAT pad for Raspberry Pi - Waveshare 13504
The e-paper display with a diagonal of 7,5" in E-Ink technology with a resolution of 800 x 480 px. Works with a voltage of 3.3 V or 5 V. It is designed for use with the main...
Index: WSR-09891
Index: WSR-09891
Mini Kit MPR121 touch module - Touch Hat for Raspberry Pi - Adafruit 2340
Shield for Raspberry Pi, version A+ / B+ and 2, with the system performing 12 capacitive touch buttons. Board allows you, for example, to create an instrument which plays via...
Index: ADA-03400
Index: ADA-03400
- On sale!
- Promotion
Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...
Index: PIM-19068
Index: PIM-19068
RGB LED Hat for Raspberry Pi 3/2/Zero - Waveshare 12725
Shield for the Raspberry Pi containing the LED matrix 8 x 4 consisting of WS2812B LEDs. Each LED can be individually set. The device has dimensions of 65 x 30 mm, it works with...
Index: WSR-08869
Index: WSR-08869
PaPiRus Zero - display e-paper 2.0'' shield for Raspberry Pi Zero
Shield for Raspberry Pi Zero PaPiRus Zero with display e-paper 2.0" with a resolution of 200 x 96 px. It is connected directly to GPIO pins.
Index: SUP-09583
Index: SUP-09583
Traffic HAT - LED module with for Raspberry Pi
Shield for Raspberry Pi, along with three large LEDs, push button and buzzer for self-assembly. It can be programmed in any language for the Raspberry Pi.
Index: SUP-13471
Index: SUP-13471
GPIO to FPC Breakout pHAT for Raspberry Pi
Trim wyprowadzająca 40-pin GPIO connector on the FPC so that you can connect sensors, wires, etc, with the Raspberry Pi Board. It allows also connection of the display...
Index: SUP-14228
Index: SUP-14228
Scroll HAT Mini - 17x7 LED matrix - HAT for Raspberry Pi - Pimoroni PIM491
A matrix consisting of 119 white LEDs in the form of an overlay for a Raspberry Pi minicomputer. The LEDs have been placed in a 17 x 7 arrangement and the brightness of each...
Index: PIM-19069
Index: PIM-19069
Gert VGA 666 KIT - VGA module for Raspberry Pi 3/2/B+
The module for self-assembly allowing the expansion of Raspberry Pi with additional analog connector VGA video. This allows for the connecting of two monitors simultaneously to...
Index: SUP-09590
Index: SUP-09590
Game HAT for Raspberry Pi - Waveshare 15154
Shield that allows you to create miniconsole for games based on minicomputer Raspberry Pi. The module is equipped with buttons, joystick, IPS 3,5" display, speaker and output...
Index: WSR-13589
Index: WSR-13589
The expansion board manufactured by SB Components is equipped with the SIM868 chip, which enables communication in the 2G standard (GSM 850 / EGSM 900 / DCS 1800 / PCS 1900...
Index: SBC-21673
Index: SBC-21673
- Reduced price
- Promotion
PiMoroni - 4x display 14-segments I2C module for Raspberry Pi
Module with four 14-segment displays with green LEDs. It is based on the HT16K33 system, controlled through an I2C interface. It is compatible with minicomputer Raspberry Pi.
Index: PIM-13856
Index: PIM-13856
LED SHIM - 28 LED RGB - pHAT for Raspberry Pi - Pimoroni PIM354
Overlay created by Pimorni, designed for Raspberry Pi minicomputers. The board has been equipped with 28 small LEDs shining in RGB color palette. LED Shim has been...
Index: PIM-18911
Index: PIM-18911
NeoKey 5x6 Ortho - module with mechanical key slots - NeoPixels - Adafruit 5157
NeoKey 5x6 Ortho is a plate produced by Adafruit, which contains as many as 30 slots for mechanical buttons. As a standard, the matrix has a 5x6 arrangement, but the design...
Index: ADA-22232
Index: ADA-22232
The cap for the Raspberry Pi containing 3-axis gyroscope, accelerometer, magnetometer and a barometer, temperature and humidity sensor, the LED matrix and a small joystick. The...
Index: RPI-04585
Index: RPI-04585
Pi Supply Media Center Hat - 2,83" touch screen - joystick + IR remote control
Overlay to implement a touch screen display to any Raspberry minicomputer with a 40-pin GPIO connector, in addition, the overlay allows you to operate the minicomputer...
Index: SUP-16616
Index: SUP-16616
- EOL
See also
A new quality of reading and writing with lining E-paper
Displays like E-paper, offers simple maintenance and low energy consumption, and more - can view the last saved contents into infinity, even after turning off the power source. In its principle use particles, charged positive and negative electric charge. In the database display E-paper, is a matrix in the form of a layer of liquid film, which is suspended mikrokapsułki charged negatively or positively, what is visually presented, respectively, black and white. For ease of use and low energochłonnością, display E-paper for Raspberry Pi, says compactness, an interesting effect of displaying graphics and excellent readability, even in strong sunlight.
Raspberry Pi in space!
We offer our shop trim Sense Hat, located in a small area several useful features - includes joystick with push button, matrix LED 8x8, sensors for measuring pressure, humidity and ambient temperature, and also features a 3-axis MEMS gyro along with accelerometer and magnetometrem that allow you to quickly determine the coordinates in space for the object with a Raspberry Pi on Board. Connect the nozzle to the GPIO pins on a Raspberry Pi and discover its huge potential. Trim Sense Hat supports all of the projects on the Raspberry Pi, and allows, in particular, the measurement of the speed of the robot with Malinka on Board and determine its location based on coordinates. Built-in LED matrix, you can view the measurement data from the sensors, the visualization of a compass, but also in the entertainment purposes of the game Tetris using the control with the onboard joystick. The pad is easily programmed thanks to a special library of Python. Using the pads Sense Hat you can start at the European Astro Pi competition for students organized by the Union of Space Agencies together with the Raspberry Pi Foundation. The contest is to write programs on the Raspberry Pi, from which astronauts will use during the session for scientific research on the International Space Station. Connect the Sense Hat for Raspberry Pi and go!