Description: MS8607 - PHT I2C pressure, humidity and temperature sensor - STEMMA QT/Qwiic - for Arduino, Metro, Feather and Raspberry Pi - Adafruit 4716.
Adafruit PHT pressure, humidity and temperature sensor. Compatible with Arduino,Metro, Feather and Raspberry Pi. Powered from 3.3 V to 5 V withI2Cinterface and STEMMA QT/Qwiic connectors. Measuring range of the sensor for pressure:from 10 hPa to 2000 hPa, humidity:from 0% to 100%, temperature:from -40°C to 85°C.
Sensor outputs MS8607
The outputs are soldering fields, which allow to soldergoldpin connectors- raster 2.54 mm. Thanks to them it is possible to connect the system with thecontact plateor main module by means ofcables.The set includesgoldpin connectors,which can be mounted on their own.
Adafruit pressure, humidity and temperature sensor is included with the goldpin connector.
Pin | Description |
---|---|
VIN | 5-volt power pin. |
3Vo | Pin of the 3.3 V voltage regulator. |
GND | The weight of the system. |
SCL | Clock line of the I2C interface. |
SDA |
I2C interface data line. |
Sensor connection
The sensor is connected by means of goldpin or STEMMAQTconnectors,which are included in the package. Example connections are presented using the contact plate and Metro plate, which is equivalent to Arduino.
Product compatible with Arduino The manufacturer has prepared auser guide andsample program code,available with the libraryfor Arduino IDE environment. |
Sensor specification MS8607
- Supply voltage: 3.3 V to 5.0 V
- Power consumption:0.78 µA
- Temperature:
- Measuring range: -40°C to 85°C
- Accuracy: ± 1°C
- Pressure:
- Measuring range: 10 hPa to 2000 hPa
- Accuracy: ± 2 nPa
- Moisture:
- Measuring range: 0% to 100% RH
- Accuracy: ± 3% RH
- Interface: I2C
- Calibration: factory-made
Useful links |