Product description: ArduCam Pi camera - for remote viewing of Octoprint / Octopi from Raspberry Pi - ArduCam B0176R
ArduCam Pi native camera from ArduCam featuring high natural resolution. Dedicated to remote viewing of 3D prints using Octoprint / Octopi system on Raspberry Pi. Two FFC ribbons are included: 1x5.9" with 15 cm length and 1x39.4" with 100 cm length. The maximum resolution of the camera is 2592 x 1944 px, its FOV angle: 54° x 44° (H x V). Its use is particularly selected for remote monitoring of 3D printer progress. What's more, the camera is compatible with 3D printing software - just install the appropriate drivers and configure according to the instructions.
ArduCam Pi camera - for remote viewing of Octoprint / Octopi printing from Raspberry Pi - ArduCam B0176R
Features
- Seamless and universal - compatible with Raspberry Pi 4 / 3B+ / 3 - 4B / 3B+ / 3B. Additionally, ArduCam has solved the installation and configuration issues on OctoPi.
- Motorized focal length - allows for better magnification and constant focus. The minimum focal length is approximately 5 cm.
- Focus Control - Innovative camera focus control is enabled by the OctoPrint Control card, which uses custom commands to adjust focus during printing.
- Dedicated to monitoring the progress of the 3D printer.
The manufacturer has prepared a user guide.
Technical specification ArduCam Pi
- Sensor: 5 Mpx OV5647
- Maximum resolution: 2592 x 1944 px
- IR sensitivity: integrated IR filter, visible light only
- Focus type: motorized focus
- Field of View FOV: 54° x 44° (H x V)
- Focal length: 2''
- PCB dimensions: 25 x 24 mm
Package contents
- ArduCam Pi camera for remote viewing of Octoprint / Octopi from Raspberry Pi - ArduCam B0176R
- 1x5,9" (15 cm) FFC ribbon for Raspberry Pi
- 1x39,4" (100 cm) FFC tape for Raspberry Pi
Contents of the kit - camera and two FFC tapes.
Useful links |
