Product description: 2'' 320x240px IPS LCD display - SPI - 65K RGB - for Raspberry Pi Pico - Waveshare 19888
IPSdisplaydesigned to work withRaspberry Pi Pico board. The module is based on ST7789VW chip and communicates viaSPIinterface. The screen diagonal is2.00"and its resolution is320 x 240 px. It is capable of displaying 65,000 colors that are part of the RGB gamut. The size of a single pixel is 0.1275 x 0.1275 mm. The module has been equipped with four buttons for any use by the user.
Product compatible with RaspberryPi Pico
The manufacturer provides aWiki page for the product, which contains information about the module's pinouts and a detailed user guide. You will also learn from it how to connect the display.
![Wyprowadzenia wyświetlacza](https://cdn3.botland.store/img/art/inne/19715_7.jpg)
Display module pinouts for Pico
The module is equipped with a socket where you can directly plug the Raspberry Pi Pico board into, or make a connection using wires. Among the pins are:
- VSYS - supply voltage from 1.8 V to 5.5 V
- GND - ground
- GP8|LCD_DC - LCD data / command line, high for data, low for commands
- GP9|LCD_CS - chip selection line, activated by low state
- GP10|SDIO_CLK - SDIO clock line
- GP10|CLK - SPI clock line
- GP11|DIN - SPI data line
- GP12|LCD_RST - LCD reset, low state activated
- GP13|LCD_BL - LCD backlight
- GP14|KEY0 - user key 0
- GP15|KEY1 - user key 1
- GP16|KEY2 - user key 2
- GP17|KEY3 - user button 3
Display specifications
- Operating voltage: from 2.6 V to 5.5 V
- Interface: SPI 4-wire
- Display type: IPS
- Chip: ST7789VW
- Diagonal: 2,00"
- Resolution: 320 x 240 px
- Number of displayed colors: 65k RGB
- Display size: 40.80 x 30.60 mm
- Pixel size: 0.1275 x 0.1275 mm
- Module size: 52 x 35 mm
Set contents
- Display 2"