Description: Tic 36v4 - USB 50V/4A stepper motor driver - assembled - Polol 3140.
MOSFET transistor basedstepper motorcontrollerTic 36v4.It works with voltage from 8V to 50 V withconsumption of up to 4 Awithoutcooling and up to 6 A with heat sink. Maximum step resolutionis 1/256. For communication uses USB interface, serial TTL, I2C, analog voltage, quadrature encoder, pulse RC.
Tic series enables simple control of bipolar stepper motors. They support six different control interfaces such as: USB for direct computer control, serial TTL and I2C for connection to a microcontroller, pulse RC system, analog voltage for using a potentiometer or joystick, quadrature encoder for working with a rotary encoder. The manufacturer providessoftware forcontrol by a computer with Windows, Linux and macOS.
Tic 36v4 stepper motor controller pre-assembled at the factory.
Connection of Tic 36v4 stepper motor driver
The Tic 36v4 controller is based on MOSFTER H-bridge transistors, so it supports higher current than standard motor controllers. It supports 9 micro-step modes with the smallest one being 1/256. Powered from 8 V to 50 V, continuous current up to 4 A without cooling or 6 A with additional heatsink.
Controller wiring diagram.
Motor controller specifications
- System: MOSFET transistors
- The interface:
- USB
- serial TTL
- I2C
- Pulse RC
- analog voltage
- square encoder
- Supply voltage: 8 V to 50 V
- Max. current without cooling: 4 A
- Max. current with cooling: 6 A
- Maximum number of steps: 5000 PPS
- Step resolution: full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
- Reverse polarity protection
- Dimensions: 38.1 x 26.7 x 10.7 mm
- Weight: 6,3 g
The set includes
- Module with Tic 36v4 stepper motor controller
Useful links |
