Description:2.2'' 320x240px TFT LCD colour graphicdisplaywith microSD reader - SPI - Adafruit.
2.2" LCD TFT graphic display with 320 x 240 px resolution and 18-bit colour depth. It works with both 3.3 V and 5 V. It communicates via the SPI bus. Additionally, the board has a micro SD memory card reader. The chip is based on the ILI9340 controller.
The leads areholes for the includedgoldpin connector- 2.54 mm raster (for self-soldering). They allow for connection of the display through wires or plugged into the contact plate.
Thanks to the built-in voltage converter the system works with both 3.3 V and 5 V logic. The installed slot allows to provide graphic files on micro SD card with FAT16/FAT32 system.
|
Product compatible with Arduino In Adafruit you can find a libraryfor Arduino users. |
Exits
| Pin | Description |
|---|---|
| BL | Screen illumination: 3.3 V to 5 V. |
| MISO | SPI bus input data line. |
| SCK | SPI bus clock line. |
| MOSI | SPI bus output data line. |
| CS | SPI bus device selection - chip select for display. |
| SD_CS | SPI bus device selection - chip select for SD card reader. |
| D/C | Transmission selection pin: data/command. |
| RST | Reset the system. |
| VIN | Supply voltage: 3.3 V to 5 V. |
| GND | The weight of the system. |
2.2'' TFT LCD graphic display specification
- Supply voltage: 3.3 V to 5.0 V
- Output operating voltage: 3.3 V to 5.0 V
- The driver:ILI9340
- Diagonal screen: 2.2 inches
- Resolution: 320 x 240 px
- Deep in color: 18-bit
- White LED backlighting with controllable brightness via PWM signal
- Communication: SPI
- Built-in slot for microSD memory card
- Dimensions of the plate: 41.0 x 66.5 x 6.0 mm
- Weight: 18,5 g
Useful links |
