Modern medicine is definitely not limited to x-rays, stethoscopes or pulse measuring devices. Currently, we live in times when there is practically no week for inventing new devices that significantly affect the effectiveness of diagnostic and treatment processes.
Case TEKO for camera and Raspberry Pi Model 3/2/B+ - Light Gray
Index: RPI-06647
- Reduced price
- On sale
- On sale!
- On sale
Medical sensors
Products: 22
Loading...
Heartbeat Detection Sensor - Iduino SE049
A sensor that allows you to measure your pulse with your finger using a phototransistor. The red LED lights up each time it detects a pulse. Powered by 5 V.
Index: OST-14276
Index: OST-14276
Biomedical electrodes - 10pcs - SparkFun SEN-12969
10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
Cables for biomedical electrodes - SparkFun CAB-12970
Wires ended on the one side with three connectors for biomedical electrodes, on the other, with jack connector of a 3.5 mm.
Index: SPF-02605
Index: SPF-02605
MyoWare Muscle Sensor - a sensor for measuring EMG muscle activity - SparkFun SEN-13723
The sensor allows to control devices via bioelectrical signals generated by human muscles (EMG). The output is an analog signal that can be read using any microcontroller with...
Index: SPF-05978
Index: SPF-05978
Disposable ECG Electrodes Pack (12 pcs)
Disposable EKG electrodes designed for heart examination and other biomedical measurements. The set consists of 12 self-adhesive sensors of breathable fabric and foam with...
Index: DFR-07922
Index: DFR-07922
DFRobot Gravity - pH analog sensor/meter
Analog pH meter with an analgue output. Allows to measure water quality. It has an accuracy of +/- 0.1 pH, which is sufficient for most applications. Equipped with LED, BNC...
Index: DFR-05874
Index: DFR-05874
DFRobot Gravity - analogue EMG sensor, electromyograph -OYMotio.n
The EMG sensor was created through the cooperation of DFRobot and OYMotion. EMG - electromyograph, sensor of electric activity of muscles and peripheral nerves of human. This...
Index: DFR-10833
Index: DFR-10833
Sensor for measuring heart activity - AD8232 - SparkFun SEN-12650
Module for measuring electrical activity of the human heart. The output is an analog signal which can be saved as EKG. The sensor is easy to operate, the manufacturer provides...
Index: SPF-02654
Index: SPF-02654
Particle Sensor Breakout - MAX30101 - SparkFun SEN-16474
The sensor is based on a system MAX30101 and allows for the determination of the distance, pulse, smoke, and even blinking of an eye. It has 3 LEDs and a very responsive...
Index: SPF-08065
Index: SPF-08065
Fermion v2.0 - Pulse Oximeter and Heart Rate Monitor - MAX30102 - I2C - DFRobot SEN0344
Sensor module with integrated MAX30102 chip from DFRobot. This is an integrated pulse oximetry biosensor module that allows you to measure heart rate and monitor saturation,...
Index: DFR-19196
Index: DFR-19196
Heart rate monitor - SparkFun SEN-11574
Module for measuring the human heart rate, compatible with Arduino. It is working with the voltage from 3 V to 5 V, the output is the analog signal. The kit includes a probe...
Index: SPF-03063
Index: SPF-03063
DFRobot Gravity: Analog Heart Rate Monitor Sensor (ECG) For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog signal. The kit includes a probe,...
Index: DFR-07436
Index: DFR-07436
DFRobot Gravity: Heart Rate Monitor Sensor For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog or digital signal. The kit...
Index: DFR-07455
Index: DFR-07455
Polar heart rate monitor - a wireless heart rate sensor for the human heart - Adafruit 1077
Wireless sensor of the human pulse, it transmits data from the probe placed on the human body. The receiver operates with a voltage of 3.3 V or 5.0 V. The output is a digital...
Index: ADA-03077
Index: ADA-03077
MyoWare Proto Shield - prototype module for EMG sensor - SparkFun BOB-13709
Board is designed for MyoWare Muscle Sensor. It allows you to create any circuit and connect it to the main module. It has 8 x 15 mounting holes with the pitch of 2.54 mm.
Index: SPF-05981
Index: SPF-05981
Grove - Sensor for measuring EMG muscle activity
Module from the Grove series that allows you to collect the bioelectric signal generated by the human muscles (EMG). The output is an analog signal that can be read using any...
Index: SEE-11308
Index: SEE-11308
Grove - heart rate monitor - heart rate sensor
Module from the Grove series, used for measuring the pulse with a clip on the finger, based on high-quality optical system CMOS with the green LED and integrated digital...
Index: SEE-11310
Index: SEE-11310
Grove - GSR sensor - electrical resistance of the skin
Module from the Grove series equipped with GSR sensor using the galvanic-skin reaction. It is powered with the voltage of 3.3 V or 5V. The s ensors of this type are used in...
Index: SEE-11314
Index: SEE-11314
Grove - heart rate sensor with a clip on the ear
Set for monitoring the heart rate, contains an ear clip with a wire and receiver module. The results can be displayed on the monitor through a serial port. The supply voltage...
Index: SEE-04409
Index: SEE-04409
MyoWare Power Shield - power supply module for EMG sensor - SparkFun DEV-13684
The board is designed for the MyoWare Muscle Sensor. It provides power to the main module via two CR2032 batteries. The batteries are connected in parallel to increase...
Index: SPF-05980
Index: SPF-05980
MyoWare Muscle Sensor Development Kit - SparkFun KIT-14409
The kit allows you to control devices via bioelectrical signals generated by human muscles (EMG). The output is an analog signal that can be read using any microcontroller with...
Index: SPF-07278
Index: SPF-07278
AD8232-EVALZ - evaluation board with a heart rate monitor
The evaluation board ad8232 equipped with module which controls the functioning of the heart. There are also components that are required for the preliminary analysis of...
Index: MOD-09543
Index: MOD-09543
- EOL
So nowadays, medicine is very technologically advanced devices equipped with various types of medical sensors. In the Botland store you will find various types of medical equipment that has a versatile or specialized use. Our components are used by scientific laboratories, medical startups, schools and universities as well as large companies. In this category you will find products that are compatible with other electronic components. Many of them can be adapted to your DIY project and programmed in your own way.
Build your own human heart rate monitor, pH meter and even an electromyography (EMG) with Botland - a device for measuring muscle activity! It's all possible and easier than you think! Find medical components for a variety of devices and projects that best suit your needs.
Electronics in medicine – professional medical sensors
Nowadays, electronics in medicine is ubiquitous and offers unlimited possibilities. Thanks to modern and innovative medical electronics, medical equipment is today characterized by the highest quality, a very high level of accuracy and repeatability of measurements. All results and values can be easily recorded, visualized and analyzed. Most importantly - thanks to modern medical electronics, we have access to the most advanced treatment techniques.
Most of us have had the ability to measure blood pressure using a seemingly ordinary blood pressure monitor. Such a device is in fact a sophisticated electronic device that makes use of a number of medical sensors. Medical sensors have significantly improved the accuracy of measurements, and hence the quality of treatment.
Today, we are able to check the condition of our circulatory system using the heart rate monitor without the presence and assistance of a doctor. You can build basic medical equipment yourself, which will be very satisfying. In the Botland store, we offer the purchase of the highest quality medical sensors. By purchasing individual components, you will be able to build a human heart rate monitor, a pH meter, or an EMG muscle activity electromyography. Of course, there are many more possibilities!
Medical sensors in robotics – there’s a lot to build
Medical sensors are a great opportunities for robotics designers. By equipping yourself with a set of medical sensors available in this category, you will have the opportunity to build a variety of structures! An additional advantage of the presented products is that many of them can be combined with other products, boards, modules and I/O devices. In other words - you can use medical components not only for medical purposes, but very versatile. In practice, you are only limited by your imagination.
Of course, the presented products are ideal for building medical robots. Basic programming knowledge is required (see courses and beginner kits in other store categories). Equip yourself with the presented modules and build a muscle-controlled robot module yourself, using the MyoWare series kit prepared by Botland. In the set you will find a sensor for measuring the activity of the EMG muscles, a power cover for the EMG sensor, an overlay for the EMG sensor, an overlay with LED diodes and a prototype cover for the EMG sensor. The set has been additionally equipped with all necessary biomedical cables and electrodes, which can also be used for EEG and ECG testing, as well as additional pins and connectors. The set is adapted to work with popular development kits – Arduino. Check also other medical sensors such as human heart rate sensors adapted to the DFRobot IO Expansion Shield.
Advanced PH sensors
Also pay attention to the PH sensors that we present in this category. If, in addition to electronics, automation and robotics, you are a plant lover or have a fish aquarium, you've come to the right place. In Botland you will find pH sensors with an accuracy of +/- 0.1 pH, thanks to which you can design your own water pH measurement system. What's more, we offer a pH sensor with an industrial probe that you can leave immersed in water for up to a year. Check out all the products in this category!