Product description: Tic 36v4 - USB 50 V / 4 A stepper motor driver - Polol 3141.
Tic36v4stepper motorcontrollercommunicatingvia USB interface, also supports serial interface TTL, I2C, analog (potentiometer), quadrature and radio RC encoder. The system, based onMOSFET transistors, operates with voltage from 8V to 50 V withcurrent consumption up to 4 A withoutheatsinkor up to 6 A with additionalcooling. Maximum step resolution is1/256.
Tic series controllers allow simple control of bipolar stepper motors. The systems support six different control interfaces: USB for direct computer control, serial TTL and I2C for microcontroller operation, RC servo system, analog voltage for potentiometer or joystick operation, quadrature encoder for rotary encoder operation. Many settings can be configured usingthe manufacturer's application forWindows, Linux and macOS.
Tic 36v4 stepper motor driver for self-soldering of connectors.
Connecting the Tic 36v4 driver
The device is based onMOSFET H-bridgetransistors, allows to control large stepper motors, supports higher current than typical motor drivers. It supports9 microstep modes withthe smallest 1/256. The controller supports voltages from 8 V to 50 V and continuous current up to 4 A without additional cooling and up to 6 A with additional cooling.
Controller wiring diagram.
Motor controller specifications
- System: MOSFET transistors
- The interface:
- USB
- serial TTL
- I2C
- Pulse RC
- analog voltage
- square encoder
- Supply voltage: 8 V to 50 V
- Max. current without cooling: 4 A
- Max. current with cooling: 6 A
- Maximum number of steps: 5000 PPS
- Step resolution: full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
- Reverse polarity protection
- Dimensions: 38.1 x 26.7 x 10.7 mm
- Weight: 6,3 g
The set includes
- Module with Tic 36v4 stepper motor controller
- Goldpin slats
- Screw connections
Useful links |
