Product description: AVR Programming Board
AVR Programming Board is designed for programming microcontrollers from the Atmel AVR family in cased: DIP8, DIP20, DIP28, DIP40. The device has pins of the microcontrollers put out on the popular goldpin strip. This allows the connection of programmable processors and other systems and devices using wires.
|
The device requires the use of an external programmer, e.g.USBasp. |
Device properties
- The system has a built-in voltage regulator 5V, for maximum efficiency, current 0.5 A, so the user has the ability to power electronic devices with voltage of 5V through the connector goldpin.
- On the board there are high quality precise connectors, facilitating assembly of microcontrollers
- The user may recharge the system via the power connector ARK DC voltage range: 9-12 V, which allows the use of a popular power supply 12V.
- Properly selected capacitors provide filtering of the supply voltage.
- The system has ISP connector for programming the microcontroller is compatible with most AVR programmers (KANDA), for example, USBasp
Microcontrollers can be programmed using the adapter:
- DIP8: ATtiny11, ATtiny12, ATtiny13, ATtiny15, ATtiny22, ATtiny25, ATtiny45, ATtiny85, AT90S2343, AT90SL2343, AT90S2323, AT90SL2323DIP20: ATtiny2313, AT902313, AT90S1200
- DIP28: ATmega8, ATmega48, ATmega88, ATmega168, AT90S2333, AT90SL2333, AT90S4433, AT90SL4433
- DIP40: ATmega16, ATmega32, ATmega323, ATmega8535, AT90S8535, AT90SL8535, AT90S4434, AT90SL4434
