Product description: Waveshare E-paper E-Ink 7.5'' 800x480px - display with HAT for Raspberry Pi
E-paper display with a diagonal of 7.5" in E-Ink technology with a resolution of 800 x 480 px . It works with a voltage of 3.3 V and 5 V. It communicates via the SPI interface. This type of display can be used to read e-books and electronic magazines. The set includes a HAT for Raspberry Pi .
Product compatible with Adruino and Raspberry
The manufacturer provides a user guide for Arduino and Raspberry Pi.
The sale includes a display with a HAT overlay, the Raspberry Pi minicomputer must be purchased separately.
The sale includes a display with a HAT overlay, the Raspberry Pi minicomputer must be purchased separately.
Display pins
The main module has an 8-pin connector.
| Pin | Description |
|---|---|
| VCC | Supply voltage: 3.3V/5V |
| GND | System mass. |
| DIN | MOSI pin of the SPI interface. |
| CLK | SCK pin of the SPI interface. |
| CS | Chip select activated low. |
| DC | Select data / commands. High status - data Low level - commands |
| RST | External reset activated low. |
| BUSES | Busy status output, activated low. |
| PWR | On/Off Power Management. |
Waveshare E-paper Screen Specifications
- Supply voltage: 3.3 V or 5 V
- Interface: SPI 3- or 4-wire
- Pixel size: 0.205 x 0.204 mm
- Resolution: 800 x 480 px
- Display Color: Black and White
- Full refresh time: 4 sec
- Quick refresh time: 1.5 sec
- Partial refresh time: 0.4 sec
- Power consumption during refresh: 26.4 mW (typical)
- Idle Power Consumption: Less than 0.01uA (typically none)
- Grayscale: 4
- Refresh time 4 gray levels: 2.1 s
- Viewing angle: 170 °
- External dimensions: 170.2 x 111.2
- Display dimensions: 163.2 x 97.92 mm
The sale includes a display with a HAT overlay, the Raspberry Pi minicomputer must be purchased separately.
E-paper E-Ink 7.5'' 800 x 480 px - display with HAT for Raspberry Pi - Waveshare 13504
The E-Ink display from Waveshare is a monochrome screen with a HAT overlay for Raspberry Pi made in e-paper technology - electronic paper. It is a modern solution, which are used, among others, in e-book readers.
E-paper displays are energy-efficient, easy on the eyes, and do not emit light, making them ideal for many electronics projects. The Waveshare model offers a resolution of 800 x 480 px at a 7.5” diagonal, as well as a viewing angle of 170°.
Modern e-paper display with overlay for Raspberry Pi
The e-paper display created by Waveshare comes with a HAT for Raspberry Pi, which allows for easy connection to the board via GPIO (SPI). The display can be powered by 3.3V or 5V.
Our offer also includes other e-paper displays, including models compatible with Raspberry Pi and various microcontrollers. We also offer a wide range of accessories for e-paper displays, including connecting cables, adapters and many others.
