The store Botland you will find minutes. screws, heatsinks and connectors suitable for use with the Raspberry Pi minikomputerem 4B.
Raspberry Pi 4B mounting elements
STS-Pi - Roving Robot 2WD - 2-wheel robot chassis for Raspberry Pi
The chassis of the robot STS-Pi was designed for use with Raspberry Pi together with the panel Explore HAT Pro or Explore pHAT, but will also cooperate with other motor...Set of screws and spacers for mounting the Raspberry Pi Mounting Kit 5 - 380 pieces
A set of 380 spacers made of black nylon . The screws, spacers and nuts are M2.5 in size and are designed to connect the expansion boards together with the Raspberry Pi...Set of heat sinks for Raspberry Pi - with heat transfer tape - green - 4pcs.
A set of 4 pieces of green heatsinks that have the dimensions 14 x 14 mm, 14 x 10 mm, 9 x 9 mm, 7 x 7 mm. There is double sided, thermally conductive tape on the...Replacement CSI/DSI Connector for Raspberry Pi 4B/3B+/3B/2B
The CSI/DSI connectors are used as camera and display slots in the Raspberry Pi 4B/3B+/3B/2B. The subject of sale is a spare part, which can be soldered into the board in...Set of copper radiators for Raspberry Pi 3/2/B+/Zero with thermal conductance tape
The set includes two radiators, made of copper, which provide cooling for minicomputers Raspberry Pi 3 B, 2 B, B+ and Zero. They are suitable for chips located on the board...Set of heat sinks for Raspberry Pi - black with heat transfer tape - 3pcs.
Set of black heat sinks in 3 pieces. They have different sizes, at the back there is a double-sided, thermally conductive tape. They are compatible with Raspberry Pi 4...2x20 goldpin plug for Raspberry Pi - colored markings
40-pin goldpin plug is compatible with the GPIO connector on a Raspberry Pi Zero and 2B, 3B, 3B+ and 4B. The plug has a colored marking for individual pins, which facilitates...Mounting Kit Four Pack - metal spacers 10mm for Raspberry Pi + screws + pads - 4pcs
Metal spacers with a length of 10 mm, designed for installation of an extension board for Raspberry Pi. Elements of this type are based on the screw, allow to keep space...Set of heat sinks for Raspberry Pi - silver with heat transfer tape - 3pcs.
Set of 3 pieces of silver heat sinks, which are 9 x 9 mm, 14 x 9 mm, 14 x 14 mm. At the back there is a double-sided, thermally conductive tape. They are compatible with...Connector Set - goldpin 2x20 male, female and mounting device - without soldering
Set of 40-pin goldpin connector strips which don't require soldering thanks to the clamps. They are used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm. The set...Male goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering
40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 4B/3B+/3B/Zero. Raster of 2.54 mm.Female socket 2x20 raster 2,54mm for Raspberry Pi
40 -pin female connector strip used in Raspberry Pi model 4B/3B+/3B/2B/Zero. Raster 2.54 mm.Female socket 2x20 raster 2.54mm for Raspberry Pi 4B/3B+/3B/3 - long pins 10mm
40-pin female connector strip compatible with the GPIO connector of the Raspberry Pi model 4B/3B+/3B/2B/B+/A+ with elongated pins with a length of 10 mm. Raster of the outputs...Female socket 2x20 raster 2.54mm for Raspberry Pi 4B/3B+/3B/Zero long pins 3mm - Adafruit 1992
40 -pin female connector strip compatible with the GPIO connector of the Raspberry Pi model 4B/3B+/3B/Zero with elongated pins with a length of 3 mm. Raster of the outputs is...Metal Spacers Delock M2,5 10mm + screws for Raspberry Pi - 4 pieces
Metal spacers with a length of 10 mm, designed for installation of extension boards for Raspberry Pi. Elements of this type are based on the screw, allow to keep the same...Aluminum Heatsink for Raspberry Pi CM4 Compute Module 4 with thermoconductive tape - black
Aluminium heatsink designed for Raspberry Pi minicomputer ( Compute Module 4 version). Black aluminium heatsink provides good heat dissipation from CM4 board elements...Female socket 2x20 raster 2.54mm for Raspberry Pi - angled
40 -pin female angled connector strap used in Raspberry Pi model 4B, 3B+, 3B, 3B, 2, B+, Zero i Zero W. Raster of 2.54 mm.Female goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering
40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm.Set of heat sinks 2x with thermoconductive tape - black
Set includes two heat sinks in sizes: 14x14mm and 9x8mm. The kit also includes a thermo-conductive tape. They can be used to cool the system of a minicomputer Raspberry Pi...Set of heat sinks for Raspberry Pi - with heat transfer tape - silver - 4pcs.
Set of 4 pieces of silver heatsinks that are 14 x 14 mm , 14 x 10 mm, 9 x 9 mm, 7 x 7 mm. There is double sided, thermally conductive tape on the back of them. They...Set of heat sinks for Raspberry Pi - with heat transfer tape - black - 4pcs.
The kit contains 4 pieces of black heatsinks that are 14 x 14 mm , 14 x 10 mm, 9 x 9 mm, 7 x 7 mm. There is double sided, thermally conductive tape on the bottom of...Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - black
The 40 x 30 x 5 mm black heat sink is compatible with the Raspberry Pi 4 minicomputer, as well as with other electronic circuits. It has a self-adhesive layer of double-sided...Set of heat sinks for Raspberry Pi - with heat transfer tape - blue - 4pcs.
The set consists of 4 heat sinks in blue color. The heatsinks are designed to cool Raspberry Pi 4B minicomputer. The upper part of the heatsink consists of ribs. Heat sinks...Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - silver
Silver-coloured aluminium heat sink, 40 x 30 x 5 mm. It is a mounting element, compatible with the Raspberry Pi 4 minicomputer, as well as with other electronic circuits. It...