In this category, we have collected pneumatic connectors for 3D printers and PTFE polymer tubes, also known as Teflon tubes. Take a look in this category and discover everything your 3D printer requires when smooth filament transport is required.
Set of two Creality pneumatic connectors - 2.5mm and 4mm
Set of two pneumatic connectors used in the following models of Creality 3D printers: Ender-3 V2, Ender-5 Pro, CR-30, Ender-5 Plus, Ender-6, Ender-2 Pro, Ender-3, Ender-3...
PTFE tube for hotend in Prusa i3 MK3S+, i3 MK3S+ with MMU2S
PTFE plastic tube designed for the hotend head of Prusa i3 MK3S+ and Prusa i3 MK3S+ printers with Multi Material 2S (MMU2S) kit. The product is an original spare part from a...
Capricorn PTFE tube - blue - filament 1.75mm - 1m
The tube is made of PTFE material. It is used to transport the printing material from the extruder to the hotend of 3D printer device. It is compatible with 1,75 mm diameter...
PTFE tube 4x2,5x1275mm - for Prusa XL printer
This 4 x 2.5 x 1275 mm PTFE (polytetrafluoroethylene) tube is designed exclusively for the Prusa XL 3D printer and forms part of the filament flow path. Its structure...
PTFE tube for hotend in Prusa MK3, MK2.5, MK2S i MMU2 printers
PTFE tube for hotend in 3D printers. Compatible with Prusa printers and filaments with a diameter of 1.75 mm.
PTFE tube for hotend in Prusa MK3S, MK2.5S, MMU2S
PTFE tube for hotend head. Compatible with Prussian i3 MK3S printer. Works with a 1,75 mm diameter filament .See also
Logistics is such a wonderful field that we encounter aspects of it almost everywhere. It is no different on a micro scale when it comes to 3D printing devices and filaments creating technology models in FFF (FDM). The spool must be guided evenly, as flexible as possible, without hanging on the knurl and without sudden changes in the diameter of the filament itself. Sometimes a small correction of the factory device is necessary, and this is only part of the operational problems that owners of 3D printers encounter. And if it turns out that something can be done even better, why not use it? 3D printing at Botland has no secrets for us, because we know ready-made 3D printers inside out, filaments of all kinds and finally the smallest, seemingly insignificant accessories.
Sometimes it is the pneumatic connector and the Bowden extruder that are the obstacles that suddenly stop all home or workshop work. The mount broke the tube so now we have a piece of tube stuck and the mount is no longer holding the tube... A replacement part is needed for now as it's hard to imagine 3D printing in a few weeks time? With Botland you can forget about such problems - all thanks to a wide range of our accessories, original spare parts and modules for 3D printers. Spare parts such as thermistors, heaters, heads and extruders for 3D printing can be found in the Spare parts category.
Translucent, chemically inert and non-toxic material. It can be used at a temperature of over 200 degrees Celsius, which is a big advantage in 3D printing, where we are dealing with high temperatures. Excellent electrical insulation, resistance to heat and corrosive chemicals are fundamental advantages thanks to which Teflon tubing has found its way to countless industries and services. The Teflon tube for the hotend head, thanks to its low friction coefficient, will be great for smooth guiding of the material to be printed, and in many models of 3D printers, the replacement can be done by yourself without tools.
