SenseCAP A1101 - Vision AI Sensor - LoRaWAN - Seeedstudio 101990962
Index: SEE-22126
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
Replacement parts for 3D printers
Spare parts for the most popular models of 3D printers. 3D printers consist of many components that are subject to gradual wear and tear during use. Moreover, just like any other device, they are subject to breakdowns resulting from e.g. poor operation or other factors. Removing the fault and restoring proper operation often requires replacement of individual components. In this category you will find spare parts for 3D printers, compatible with most popular models available on the market.
Loading...
Set of two Creality pneumatic connectors - 2.5mm and 4mm
Set of two pneumatic connectors used in the following models of Creality 3D printers: Ender-3 V2, Ender-5 Pro, CR-30, Ender-5 Plus, Ender-6, Ender-2 Pro, Ender-3, Ender-3...
Index: CRL-20647
Index: CRL-20647
StepStick DRV8825 Stepper Motor Driver
Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling of up to 2.2 A) per coil, at...
Index: MOD-03739
Index: MOD-03739
Stepper motor driver A4988 RepRap - red
Stepper motor controller based on A4988. Powered from 8 - 35 V, with a maximum current consumption of 1 A per coil. Maximum resolution: 1/16 steps.
Index: MOD-02660
Index: MOD-02660
Bigtreetech TMC2209 v1.3 Stepper Motor Driver
Stepper motor driver, whose supply voltage ranges from 4.75 V to 28 V DC . The maximum current consumption per coil is 2 A (RMS). The driver can operate in two modes: step /...
Index: BTT-19883
Index: BTT-19883
A4988 - stepper motor driver RepRap 35V/2A - Pololu 1182
Stepper motor driver based on the A4988 system. Voltage supply in the range of 8 to 35 V with maximum current consumption of 2 A per coil. Maximum resolution: 1/16 of a step....
Index: PLL-00148
Index: PLL-00148
Stepper motor 42-40 used in Creality 3D printers. It is used to move printing elements along a given axis. It is an original manufacturer's part. It provides full...
Index: CRL-15772
Index: CRL-15772
Y Axis 42-34 Stepper Motor for Creality Ender-3 V2 3D Printer
42-34 Y axis stepper motor used in Creality Ender-3 V2 3D printer. Together with the toothed belt, it constitutes a drive system for moving elements of the 3D printer moving...
Index: CRL-20504
Index: CRL-20504
Dual Extrusion Module for Snapmaker 2.0 3D printer
Module with two extruders designed for the Snapmaker 2.0 device. It allows you to work with two different materials. Perfect when it is necessary to use supports . The...
Index: SNM-23440
Index: SNM-23440
- Reduced price
- SPECIAL OFFERS
Vibration damper for NEMA17 stepper motor
Vibration damper designed for mounting on NEMA17 stepper motors, used, among others, in 3D printers. The use of a vibration damper enables the reduction of noise and...
Index: DNG-17909
Index: DNG-17909
PTFE tube for hotend in Prusa i3 MK3S+, i3 MK3S+ with MMU2S
PTFE plastic tube designed for the hotend head of Prusa i3 MK3S+ and Prusa i3 MK3S+ printers with Multi Material 2S (MMU2S) kit. The product is an original spare part from a...
Index: PSA-19925
Index: PSA-19925
FEP film for Creality 3D printer - 266x190mm
FEP foil with dimensions of 266 x 190 mm used in the following models of Creality 3D printers: LD-006, Halot-Sky and Halot-Lite. It is an consumable item. It is mounted on the...
Index: CRL-21832
Index: CRL-21832
Cooling kit for Creality 3D printers
A set that allows you to maintain good print condition even when working at high speed . The system consists of three large 5020 fans operating at a speed of up to 8000 rpm...
Index: CRL-23432
Index: CRL-23432
- Sale
- SPECIAL OFFERS
Bigtreetech SKR Mini E3 V3.0 motherboard for Creality Ender 3/Ender 3 Pro/Ender 5/ CR-10 3D printers
The SKR Mini E3 V3.0 motherboard from Bigtreetech is designed for Creality 3D printers: Ender 3 / Ender 3 Pro / Ender 5 / CR-10. Equipped with the STM32G0B1RET6 /...
Index: BTT-20839
Index: BTT-20839
A motherboard dedicated to the Ender-3 printer. It is an original subassembly of the printer's manufacturer, Creality . The motherboard has the manufacturer's code V4.2.7....
Index: CRL-15771
Index: CRL-15771
PTFE tube for hotend in Prusa MK3S, MK2.5S, MMU2S
PTFE tube for hotend head. Compatible with Prussian i3 MK3S printer. Works with a 1,75 mm diameter filament .
Index: PSA-15790
Index: PSA-15790
Mainboard for Flashforge Adventurer 4 3D Printer
Motherboard for Adventurer 4 3D Printer This product is an original spare part from Flashrorge. It ensures full compatibility with the device. The controller is equipped with...
Index: FFO-20935
Index: FFO-20935
- Sale
Optical Limit Sensor Endstop Reprap 3D Ramps 1.4
Optical, slit end sensor dedicated to RapRap 3D printers. The module has three outputs and connects to the Ramps 1.4 controller via the included cable.
Index: MOD-02659
Index: MOD-02659
Heater Cartridge E3D for Prusa MK3/MK3S 40W 24V printer
E3D heater cartridge with a power of 40W for 3D printer Prusa MK3 / MK3S.
Index: PSA-13631
Index: PSA-13631
SM-DU cable - for auto-leveling sensor - 2m
2 m long cable for connecting the Antclabs BLTouch auto-leveling sensor, used in 3D printers. The product ends with a plug with a pitch of 1 mm, which can be easily connected...
Index: DNG-21527
Index: DNG-21527
Bigtreetech Manta M4P V2.1 motherboard for 3D printers
The Bigtreetech Manta M4P motherboard was designed to work with the Klipper system. It requires a Raspberry Pi CM4 or Bigtreetech CB1 module to run Linux and then Klipper....
Index: BTT-22252
Index: BTT-22252
- Reduced price
- SPECIAL OFFERS
Thermistor for Creality 3D printers heating table - single tip protected by glass
Thermistor for the heating table of Creality 3D printers. Can also be used in many other Creality models. The thermistor has a tip embedded in glass . It can detect...
Index: CRL-20590
Index: CRL-20590
Bigtreetech SKR Pico V1.0 motherboard compatible with Raspberry Pi - for Voron V0 3D printer
Motherboard for Voron V0. The controller is based on an efficient microcontroller developed by the Raspberry Pi foundation - RP2040 . The microcontroller is equipped with a...
Index: BTT-20838
Index: BTT-20838
Bigtreetech Octopus Pro V1.0.1 STM32F446ZET6/STM32F429ZGT6 motherboard for 3D printers
Efficient Bigtreetech Octopus Pro v1.0.1 motherboard based on the 32-bit STM32F446ZET6 / STM32F429ZGT6 ARM Cortex M4 microcontroller, clocked at 168 MHz and with 1 Mb of...
Index: BTT-20840
Index: BTT-20840
Mainboard for Flashforge Adventurer 3 3D Printer
A motherboard that is an original , fully compatible replacement part for the Flashforge Adventurer 3 3D printer. The controller is equipped with the necessary connectors to...
Index: FFO-20943
Index: FFO-20943
- Sale
See also
Spare parts for 3D printers - wide range
In this category we offer spare parts kits, as well as individual components. We offer, among others, original products characterized not only by full compatibility, but also by the use of high-quality wear-resistant materials. All components come directly from manufacturers or verified suppliers, thanks to which they are distinguished by high quality and full compliance with the description.
- In the category of spare parts for 3D printers you will find, among others, fully assembled heads that guarantee the correct printing parameters.
- There are also laser modules characterized by high power to enable engraving in various materials.
- In the case of electronic damage to the printer it is sometimes necessary to replace the entire motherboard, which can also be found in our store.
- We also offer replacement plates made of spring steel, characterized by a large working surface. The use of high quality materials guarantees long life, even in case of intensive use.
The category with spare parts for 3D printers is systematically expanded with new products, thanks to which you can repair your 3D printing equipment on your own.
What other spare parts can be found in our offer?
Particularly noteworthy are the mentioned spare parts kits, containing original components. The number and type of elements are strictly dependent on a particular set and manufacturer.
- Sets may include, among others, power cables for both the motor and the extruder, limit switches, heating tubes, guide rolls, nozzles, toothed belts and others.
- We also offer precise sensors designed for self-leveling of the table, fully compatible with different types of 3D printers.
- When a power supply fails, it is usually necessary to replace it with a new one. We offer a wide selection of original power supplies to ensure a stable power supply, necessary for the proper operation of 3D printers.
- In addition, in our assortment you can find additional displays, extruders, connectors, as well as protective covers protecting the device from mechanical damage.
- We have also prepared solidly made heating blocks, which are part of the hotend head. The use of high-quality materials, such as aluminum, guarantees long life of the spare part.
In this category you will also find stepper motors compatible with popular devices. We provide a wide selection of power cables for sensors, motors and other components that require power. The cables are terminated with compatible plugs, which makes their replacement quick and easy.
Other spare parts for 3D printers
3D printing usually requires cooling of the printouts, which is realized by a fan. In the offer of our shop you will find, among others, efficient drum fans distinguished by high efficiency and reliability. Also available are filament sensors, robust and durable gears, spare Wi-Fi modules and vibration dampers compatible with stepper motors.
If you have any questions about the availability of spare parts for 3D printers, please feel free to contact our consultants, who will be happy to help you find a compatible component.