- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Replacement parts for 3D printers - Strona 2
Loading...
Bigtreetech Octopus Pro V1.0.1 STM32F446ZET6/STM32F429ZGT6 motherboard for 3D printers
Efficient Bigtreetech Octopus Pro v1.0.1 motherboard based on the 32-bit STM32F446ZET6 / STM32F429ZGT6 ARM Cortex M4 microcontroller, clocked at 168 MHz and with 1 Mb of...
Index: BTT-20840
Index: BTT-20840
Mainboard for Flashforge Adventurer 3 3D Printer
A motherboard that is an original , fully compatible replacement part for the Flashforge Adventurer 3 3D printer. The controller is equipped with the necessary connectors to...
Index: FFO-20943
Index: FFO-20943
- Sale
Extruder Driven Gear for Prusa Mini / Prusa Mini+
Gear that is part of the extruder of the Original Prusa Mini and Original Prusa Mini+ printers. It is a driven (pressure) wheel. High quality material from which the...
Index: PSA-18653
Index: PSA-18653
Radiator designed for the Bigtreeetech CB1 control module. It allows to effectively remove excess heat from the Bigtreetech CB1 central unit, which improves the stability of...
Index: BTT-22251
Index: BTT-22251
Ramps 1.4 RepRap driver for 3D printer
Popular driver of 3D printer, adapted to work with Arduino Mega 2560 and stepper motors driver A4988. The system requires a power source with an output voltage of 12 V and...
Index: MOD-02193
Index: MOD-02193
Bigtreetech v1.4 SKR 32-bit control board
Bigtreetech SKR v1.4 is a 32 bit motherboard with ARM Cortex-M3 processor and 100 MHz LPC1768 chip. It is used, among others, in the Biqu B1 printer. The board supports I2C,...
Index: BTT-18756
Index: BTT-18756
Bigtreetech TFT35 v3.0.1 display- two working modes
A 3.5'' display, which can work in two modes, depending on the way it is connected to a motherboard and the chosen firmware. It can function as a screen with touch...
Index: BTT-18758
Index: BTT-18758
Micro Swiss Direct Drive Extruder for Creality Ender 5
Micro Swiss extruder with hotend designed for Creality 3D printers from Ender 5 series. Its installation does not require any additional modifications to the printer....
Index: MIS-20066
Index: MIS-20066
- Sale
- SPECIAL OFFERS
CR Touch Auto Leveling Kit for Creality 3D printer
Auto- leveling sensor for selected models of Creality 3D printers: Ender-3, Ender-3 V2, Ender-3 Pro, Ender-3 Max, Ender-5, Ender-5 Pro, CR-10. The sensor is mounted on the...
Index: CRL-20823
Index: CRL-20823
Motherboard Bigtreetech SKR 3 EZ for 3D printers
Bigtreetech SKR 3 EZ V1.0 motherboard is 32bit 3D printer motherboard updated by Shenzhen Biqu Technology Co., Ltd. team for EZ series drivers based on SKR 3. It is...
Index: BTT-21679
Index: BTT-21679
Stepper motor driver A4988 RepRap - green
Stepper motor driver based on the A4988 system. Voltage supply in the range from 8V to 35 V, with maximum current consumption of 1 A per coil. Maximum resolution: 1/16 of a...
Index: MOD-02964
Index: MOD-02964
Blower Fan Creality 24V 40x40x10mm for Ender 3
Original Creality fan designed for Ender series 3D Printers, mounted on the printer head. Fan with input voltage 24 V and dimensions of 40 x 40 x 10 mm. It has two...
Index: CRL-15768
Index: CRL-15768
- Sale
Stepper motor 42SHDC1065Z-19WT 200 steps 4,48V / 0,8A / 0,28Nm for Flashforge Adventurer 3
42SHDC1065Z-19WT x/y/z axis stepper motor for Flashforge Adventurer 3. It has a resolution of 200 steps per revolution. It consumes 0,8 A per coil. The motor torque is 2.85...
Index: FFO-18649
Index: FFO-18649
- Sale
Micro Swiss - Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
Micro Swiss extruder with hotend designed for Creality CR-10 and Ender 3 3D printers. Its installation does not require any additional modifications to the printer. Just...
Index: MIS-20065
Index: MIS-20065
- Sale
- SPECIAL OFFERS
Capricorn PTFE tube - blue - filament 1.75mm - 1m
The tube is made of PTFE material. It is used to transport the printing material from the extruder to the hotend of 3D printer device. It is compatible with 1,75 mm diameter...
Index: CRL-20285
Index: CRL-20285
A 42-40 stepper motor with a 7mm wide brass gear set on the shaft that acts as a knurl. Used in the extruders of the following models of Creality 3D printers: CR-10 S5,...
Index: CRL-20501
Index: CRL-20501
HEPA filter for Flashforge Adventurer 4 3D printer
HEPA filter for the Flashforge Adventurer 4 3D printer. Its main task is to capture unwanted microparticles released from the filament during the formation of 3D models. The...
Index: FFO-20928
Index: FFO-20928
Filament sensor - for Prusa MINI+ 3D printer
Filament sensor for Prusa MINI+ 3D printer. The product guarantees compatibility with the indicated 3D printer model. The main task of the sensor is to detect disruptions in...
Index: PSA-20956
Index: PSA-20956
Heating tube for Creality Ender-3 S1 Pro and CR-10 Smart Pro 3D printer - 50W 24V
Heater used in Creality Ender-3 S1 Pro and CR-10 Smart Pro 3D printers. The element is mounted in the heating block, which is part of the hotend head. The heater's supply...
Index: CRL-21506
Index: CRL-21506
- Sale
Cable combination package for Creality Sermoon V1 Pro 3D printer
A set of two cables dedicated to Creality Sermoon V1 Pro and Sermoon V1 3D printers. The package includes cables to connect the display and the print head to the printer...
Index: CRL-21514
Index: CRL-21514
- Sale
Bigtreetech v1.4 SKR Turbo 32-bit control board
Bigtreetech SKR v1.4 Turbo is a 32 bit motherboard with ARM Cortex-M3 processor and LPC1769 chip with 120MHz frequency. It is used, among others, in the Biqu B1 printer. The...
Index: BTT-21601
Index: BTT-21601
Easy Driver EZ5160 Pro V1.0 Bigtreetech
Easy Driver EZ5160 PRO V 1.0 is a new driver from Bigtreetech that thanks to its innovative design, it is very easy to install in the motherboard. The construction of the...
Index: BTT-21680
Index: BTT-21680
Micro Swiss NG - Direct Drive Extruder with engine for Creality Ender-5 series 3D Printers
A set of elements for self-assembly of a high-quality Direct Drive extruder by Micro Swiss used in 3D printers. The extruder is compatible with the Ender-5 series from...
Index: MIS-23024
Index: MIS-23024
- Sale
- SPECIAL OFFERS
FEP film for Creality Halot Mage 3D printers - 286x198mm - 5pcs
A set of five pieces of high-quality FEP foil for resin 3D printers. The product is compatible with Halot Mage , Halot Mage Pro and other resin printers with a 10-inch LCD...
Index: CRL-23430
Index: CRL-23430