The work of a designer, tester, installer, or service technician of electronic devices often requires the use of a variety of more or less complex meters. However, meters for temperature, speed, illumination, sound, distance, or wind strength are also used in a number of other fields - from industrial production, to refrigeration and heating (HVAC), to the construction and repair industry. In this category, you will find a range of non-electrical value meters as well as various types of testers and other meters for electronics engineers.
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
BBMagic BBMobile - Bluetooth LE module for Arduino, STM, ARM, AVR
Index: BBM-19294
- On sale!
- Promotion
Other meters
Loading...
Temperature Meter Pyrometer Benetech GM320 from -50 to 380C
IR contactless pyrometer thermometer. It has a laser pointer for accurate targetting the measured point. The device is equipped with a graphical backlit display and has an auto...
Index: BNT-10767
Index: BNT-10767
The device allows to measure the rotational speed in the range of 2.5 to 99,999 rpm resolution 0.1 rpm Meter can be used, for example, to study the speed of engines.
Index: BNT-12312
Index: BNT-12312
USB sockets tester UNI-T UT658 Dual
The UNI-T UT658 Dual USB socket tester allows you to test USB chargers , portable power supplies, USB type A and C cables and other charging devices. UT658 allows you to...
Index: LEC-17180
Index: LEC-17180
Tester equipped with a large, clear 1.8" TFT display. It can be used to test various types of transistors and diodes, resistors, capacitors, inductors and batteries. In...
Index: DNG-18505
Index: DNG-18505
Connection tester RJ45 / RJ12 / RJ11 / Coaxial - Lanberg NT-0401
Tester for network cables terminated with RJ45, RJ12 , RJ11 and Coaxial plugs. It helps in service work, significantly improving them. The device allows to verify the proper...
Index: IMP-16999
Index: IMP-16999
Socket tester 230V - Uni-T UT07A-EU
Tester Uni-T UT07A-EU enables detection of incorrect phase connection in the power socket, checking the grounding status of the socket. It has status LEDs. Tester should be...
Index: LEC-19076
Index: LEC-19076
Battery charge level and sound level indicator - KA2284
The module is based on the KA2284 system. It is used to measure the input signal with the 5 LEDs, which are gradually included depending on the value of the measured voltage....
Index: MOD-07150
Index: MOD-07150
Temperature Meter Pyrometer Benetech GM550 from -50 to 550C
IR contactless pyrometer thermometer. It has a laser pointer for accurate targetting the measured point. The device is equipped with a graphical backlit display and has an...
Index: BNT-10768
Index: BNT-10768
Tachometr kontatkowy - Benetech GM8906
A tachometer is a device used to measure the rate of linear speed rotation and frequency of electric motors, rotors, blades, shafts, etc.
Index: BNT-19575
Index: BNT-19575
Temperature Meter Pyrometer Benetech GM900 from -50 to 950C
IR contactless pyrometer thermometer. It has a laser pointer for accurate targetting the measured point. The device is equipped with a graphical backlit display and has an...
Index: BNT-10770
Index: BNT-10770
Sonometer, decibel meter Benetech GM1352 - 30 to 130dBA
Digital sound meter for measuring sound intensity. It is suitable for various environments such as factories, offices, traffic, workplaces, at home and can be used to check the...
Index: BNT-19576
Index: BNT-19576
Distance meter - laser rangefinder - UNI-T LM70A
The distance meter is a device using laser technology . It is used to accurately measure the distance between two points . This is an advanced tool that is based on...
Index: LEC-23463
Index: LEC-23463
Test kit, electronic component tester - M12864 KIT
The set for testing and the recognition of electronic components such as bipolar transistors PNP, NPN, MOSFET transistors with channel P and N, field transistors JFET and LEDs....
Index: MOD-05056
Index: MOD-05056
DFRobot Gravity - I2C battery charge level meter
A module designed for reading the Li-Pol 3.7 V battery charge level in real-time. It is also equipped with alarm function when the battery level is low, or when battery power...
Index: DFR-12263
Index: DFR-12263
Tester is a professional device designed to control network cables. It allows you to check the cabling, inspect for errors in cables and finds pairs of wires. The device allows...
Index: BNT-19571
Index: BNT-19571
Sonometer, decibel meter Benetech GM1351 - from 30 to 130dBA
Digital multimeter is used to measure sound intensity. It works in different environments such as factory, office, traffic, work, home, and can also be used to test the sound...
Index: BNT-10776
Index: BNT-10776
Tester przewodów RJ45/RJ11/RJ12/USB - Lanberg NT-0403
RJ45, RJ11, RJ12 and USB cable tester type A and B. The device allows you to quickly check the continuity of the cable, and the correct pin assignment of the cable. The tester...
Index: IMP-17000
Index: IMP-17000
RJ11/RJ45 Cable tester - Rebel RB-468
Tester of network cables terminated with RJ45 and RJ11 plugs. Tester consists of two independent devices , which at any time can be disconnected to inspect longer cables or...
Index: LEC-18394
Index: LEC-18394
RJ45/RJ12/RJ11 network cable tester - Lanberg NT-0402
A power cable tester that allows you to quickly and easily check the correct placement of the wires in the plug. The product enables testing of cables terminated with RJ45,...
Index: IMP-17001
Index: IMP-17001
Analogue battery tester Rebel RB-168
The Rebel battery tester allows you to quickly and easily check whether the battery is still suitable for use. The product is compatible with 9 V, AAA, AA, C, D batteries...
Index: LEC-18384
Index: LEC-18384
Digital battery tester REBEL RB-168D
The Rebel Digital Battery Tester is a simple device to verify the condition of a battery by checking its voltage. It can be used to test 9-volt, AAA, AA, C, D batteries and...
Index: LEC-18385
Index: LEC-18385
Meter for identification and detect cables Rebel RB-806R
A cable identification device consisting of a transmitter and a receiver. The transmitter sends a test signal to the connected cable and the user, using the receiver, scans...
Index: LEC-18396
Index: LEC-18396
Distance meter - laser rangefinder 50m - Uni-T LM50A
The Uni-T laser rangefinder allows you to quickly and precisely determine the distance between the device's location and the target measurement location, as well as calculate...
Index: LEC-23462
Index: LEC-23462
HackRF One SDR - device for testing radio waves
Device for transmission and reception of radio waves in the frequency range from 10 MHz to 6 GHz, designed to study and develop the radio signals.
Index: SPF-04289
Index: SPF-04289
See also
- Universal meters
- Weather and air quality meters
- Resistance meters
- Energy meters
- Oscilloscopes
- Function generators
- Measuring probes
- Voltage indicators
- Measures and calipers
- Weight meters
- Light meters
- Clamp meters
- Cable detectors
- Temperature gauges
- Cable testers
- Socket testers
- Tachometers
- Laser rangefinders
Building or renovating?
If so, you will certainly need the DPM KC098YB detector - this small and handy device can detect live wires running through walls, metal or wooden elements. In our offer you will also find a similar detector made by UNI-T, UT387B. If you are currently installing a local computer network, be sure to choose the RJ45/RJ11 cable tester, which will save you a lot of time when starting connections between different rooms. To make bigger construction and renovation works easier you should have at hand a solid laser distance measurer - for example Yato YT-73125 with a range of up to 40 m, memory for 20 measurements and housing resistant to tough conditions.
Check the temperature... in color!
Non-contact temperature measurements are such a universal method for testing proper functioning of devices or tightness of installations that it would be difficult to include even a representative sample of their possibilities in a short description. Therefore we will limit ourselves to pointing out the most interesting thermometers from our offer. UNI-T company has introduced a number of pyrometers with different ranges of measured temperatures and different accuracy levels. The UT300C temperature meter offers measurement from -18 oC to 400 oC, while the UT300S version can cope with temperatures from -32 oC. Benetech on the other hand offers non-contact thermometers working in a very wide range from -50 oC to 950 oC (model GM900) and a bit cheaper GM700 (-50 oC to 700 oC). If you need not only a simple measurement but also an accurate visualization of thermal fields, choose one of the thermal imaging cameras of the world giant - the company Flir. In our offer you will find models TG165 (80 x 60 px, 2" screen) and E4 (80 x 60 px, 3" screen).
Electromagnetic field and spectrum measurements
A particularly complex field of measurements is electromagnetic field metrology. The simplest spectrum analyzer available in our offer - RF Explorer - operates in the range from 15 MHz to 2.7 GHz and presents the measured spectrum on a graphic LCD screen with a resolution of 128 x 64 px. For professional applications we recommend portable, advanced vector analyzer KC901S, offering measuring bandwidth from 150 kHz to 3 GHz, bandwidth measurements of filters and amplifiers, antenna analysis, reflected wave measurement or EM field strength. The whole unit - analyzer and accessories, including calibration kit, reducers for various standards of coaxial connectors, as well as mains charger, rechargeable batteries and 8 GB microSD card - is sold in an aesthetic, aluminum carrying case, making it easy to carry the equipment to the place of measurement.