- Reduced price
Product description: EYESPI Pi Beret - Eyespi to Raspberry Pi display adapter - 18pin FPC connector, STEMMA QT / Qwiic - Adafruit 5783
EYESPI Pi Beret is a combination of an overlay and an adapter that allows you to connect many peripheral devices to Raspberry Pi in a plug-and-play way - without the need to get tangled in cables. Using it, you will be able to quickly connect colorful TFT orE-Ink displays and your favorite sensors . The board also has a convenient STEMMA QT / Qwiic connector to facilitate prototyping and an 18-pin FPC connector with a 0.5 mm pitch . FPC tape must be purchased separately.
The manufacturer has prepared a detailed user guide in which you will find a lot of useful information. Check!
EYESPI Pi Beret - Eyespi to Raspberry Pi display adapter - 18pin FPC connector, STEMMA QT / Qwiic - Adafruit 5783.
EYESPI Pi Beret - Eyespi display adapter for Raspberry Pi.
Pinout description
- EYESPI connector - allows you to connect EYESPI-compatible displays,
- Pins needed to use the display:
- MOSI/MISO/SCK - SPI pins are connected to the default port SLEEPS in Raspberry Pi,
- Display CS - Raspberry Pi CE 0 ,
- Display DC - Raspberry Pi GPIO #25 ,
- Display Reset - Raspberry Pi GPIO #27 ,
- Display Busy - Raspberry Pi GPIO #17 (used by E-Ink displays),
- Display Backlight - Raspberry Pi GPIO #18 (used to illuminate the screen),
- Display Touch CS - Raspberry Pi CE 1 B (optional),
- Display Touch IRQ - Raspberry Pi GPIO #24 (optional),
- SCL - I2C interface clock line,
- SDA - data line of the I2C interface.
Technical Specifications
- Purpose: adapter for Raspberry Pi
- Pins: solder pads, STEMMA QT / Qwiic, 18-pin FPC connector with a pitch of 0.5 mm
- Board dimensions: 64.8 x 15 x 9.7 mm
- Weight: 5.4 g
Set contents
- EYESPI Pi Beret - Eyespi display adapter for Raspberry Pi - 1 piece
The kit does not includeUseful links |
