- Reduced price
Product description: SparkFun MOSFET Power Switch and Buck Regulator - power switch and step-down converter - Low-Side - SparkFun COM-23979
The SparkFun MOSFET Power Switch and Buck Regulator combines two functionalities - it works simultaneously as a step-down regulator and a low-voltage switch . It is equipped with an LMR14203 (buck regulator) configured for a 3.3 V output, and an N-channel MOSFET (PSMN7R0-100BS) configured as a Low-Side Switch. This allows you to power your project with a voltage of up to 12 V / 10 A , while simultaneously providing 3.3 V to the logic part of the control board. The manufacturer has equipped the module with a number of interfaces and useful connectors through which you can connect the power supply to a selected microcontroller (Arduino, micro:bit or Raspberry Pi).
Check out the manufacturer's user guide !
SparkFun MOSFET Power Switch and Buck Regulator - power switch and step-down converter - Low-Side - SparkFun COM-23979.
Built-in flyback diode protects against overvoltages generated by inductive loads.
Main features of the module
- LMR14203 buck regulator : configurable to 3.3V output, allows powering low-voltage modules.
- N-channel MOSFET : Low-Side switch allows control of loads up to 10 A.
- Wide supply voltage range : can be powered from 4.5V to 12V, which ensures versatility in various applications.
- Simple integration : thanks to the PTH pinouts, the module can be easily integrated into existing systems.
- Surge Protection : Built-in flyback diode protects against surges generated by inductive loads.
The manufacturer recommends not to load the module with a current higher than 10 A.
Technical specification of the module
- Input voltage range: 4.5V to 12V
- Step-down voltage regulator: LMR14203, configured for 3.3V/300mA output
- N-Channel MOSFET: PSMN7R0-1000BS, configured as a low-voltage switch
- Outputs:
- Input: 5.5/2.1mm DC
- Output: Poke-Home connectors
- Control Pins: 1x4 female connectors with a pitch of 2.54 mm
- Built-in Flyback diode on load
- Board dimensions: 38.1 x 38.1 mm
- Plate weight: 9.9 g
The board contains a PSMN7R0-1000BS N-channel MOSFET transistor.
