- EOL
|
Attention! Sale of this product has ended. Check others in this category. |
Description
3Doodler Create pen for spatial drawing. Magically turns drawing with crayons into 3D printing. Instead of flat pictures it allows you to create spatial objects. It allows to create both toys, teaching aids (e.g. geometric shapes) and true works of art.
3Doodler Create is one of those fantastic ideas that seem so obvious in retrospect that it's hard to believe they are only now being realized. The premise and its operation is simple: the pen draws with melted filament, which gives the possibility to create spatial objects just like in 3D printers, but without the need to create computer models. You are limited only by your creativity.
Features of 3Doodler Create
- Simple and intuitive control system that you can adjust to your drawing style.
- The nib ejects 30% fasterin fast mode .
- The drive system has been completely redesigned so you can enjoy the increased performance, print speed and efficiency of the 3Doodler Create.
- Transparent cap, so you can check the status of the cartridge placed in the "pen".
- Durable and reinforced nozzle. Easy to replace and less prone to damage.
- Ambient light.
How to start ?
- Micro USB port - connect and charge the battery, quickly and easily.
- ON / OFF switch - slide the slider to the ON position. Wait 1 minute for the pen to heat up
- LED light:
- red - heating up
- green - ready to draw
- yellow - catching
- Insert nib - select nib colour and place it in the device before you start drawing
- Easy to use - press the button to start or stop, double click to go back.
- Pen Nozzle - the plastic hardens after a few seconds, giving you time to properly form the shape of your design
Set includes
- 3Doodler Create pen
- AC adapter (European plug)
- Unlocking tool
- Nozzle wrench
- Mini screwdriver
- User manual in Polish
- 2 x set of 25pcs cartridges ( 1 x ABS and 1 x FLEXY )
| We also offer sets of additional cartridges. |
Technical specification
| Attribute | Value |
|---|---|
|
Model |
3Doodler Create |
|
Printing Technology |
FDM / FFF / PJP |
|
Number of nozzles |
1 |
|
Type of filament |
ABS, PLA, Flexy |
|
Memory card reader |
None |
|
Housing material |
Plastic |
|
Accessories included |
3Doodler Create pen, AC adapter Unlocking tool, Nozzle wrench, Mini screwdriver, User Manual, 2 x cartridge set |
|
Display type |
None |
|
Colour |
Smoky Blue |
|
Maximum temperature |
240° C |
|
Nozzle diameter |
2.2 mm |
|
Felt diameter |
3 mm |
|
Dimensions ( W x D x H) |
160 x 17 x 19 mm |
Useful links |
