Instruments for measuring air quality and weather conditions.
- On sale!
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Filament Rosa3D Refill PLA Magic Silk 1,75mm 1kg - Gold-Silver
Index: ROS-24206
- Reduced price
- Promotion
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Index: AKS-10816
- Reduced price
- Promotion
- Reduced price
- Promotion
Weather and air quality meters
Loading...
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on the microUSB connector that allows to connect the sensor directly to the computer. The module is...
Index: DNG-13445
Index: DNG-13445
Adapter IDC 10pin 1.25mm - Molex PicoBlade 1.25mm for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four pins for soldering the goldpin of...
Index: DNG-10927
Index: DNG-10927
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor - soldered pins
The adapter allows you to transfer the signal from the IDC 10 pin connector to the microUSB connector, this allows you to connect the sensor directly to your computer. The...
Index: ZES-16479
Index: ZES-16479
Dust/air purity sensor PM1.0/PM2.5/PM10 - PMS7003 - 3.3V UART
Dust sensor allows you to monitor the purity of the air, measures the PM1.0, PM2.5, PM10 . Equipped with a sensor enabling detection of particles with diameter above 0,3 μm,...
Index: DNG-18373
Index: DNG-18373
DIY kit for smog sensor - air purity sensor PM2.5 and PM10
The kit allows to build your own meter of smog. The kit includes wi-fi ESP8266 module + NodeMCU v3, the sensor PMS7003, adapter for the PMS sensor, humidity sensor, microUSB...
Index: SES-13434
Index: SES-13434
Adapter IDC 10pin 1.27mm - Molex PicoBlade 1.25mm + connectors for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four soldered goldpin pins of 2.54 mm....
Index: DNG-13747
Index: DNG-13747
Laser dust/air sensor PM2.5 / PM10 SDS011 - 5V UART/PWM
The laser sensor of dust for the control of air purity. Allows to detect particles with diameter more than 0.3 μm, designed to measure PM2.5 and PM10. It has a fan that sucks...
Index: SEN-08332
Index: SEN-08332
Anemometer / anemometer Benetech GM816 - 6-arm rotor
Anemometer / wind gauge is used to measure the movement of gases, the flow rate of air. The device has a 6-arm rotor, which, due to gas flow, begins to rotate. Measurements are...
Index: BNT-10764
Index: BNT-10764
Dust/air quality sensor PM1.0 / PM2.5 / PM10 - PMS5003 - 5V UART
Sensor of dust allows monitoring the air quality, measures the ratio of PM1.0, PM2,5, PM10. Equipped with a sensor that could detect particles with diameter more than 0.3...
Index: MOD-06797
Index: MOD-06797
Dust / air quality sensor PM2,5 - 5V UART - PlanTower PMS9103M
The dust sensor module allows you to determine the air quality . It measures the concentration of PM2.5 particles and detects particles with a diameter of 0.3 μm, such as...
Index: PLA-17768
Index: PLA-17768
IDC adapter 10pin 1.27mm - Molex PicoBlade 1.25mm + v2 connectors for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four soldered goldpin pins of 2.54 mm....
Index: DNG-13746
Index: DNG-13746
Compact Optical Dust Sensor GP2Y1010AU0F
Sensor of dust that allows you to monitor the purity of the air. It is equipped with a sensor with a sensitivity of 0.5 V 0.1 mg/m3, for example, cigarette smoke. The system is...
Index: SEN-08587
Index: SEN-08587
Dust / air quality sensor PM1.0 / PM2.5 / PM10 - 5V UART - PlanTower PMSA003-A
Dust sensor module that allows you to measure the degree of air purity. Enables precise analysis of the pollution in the environment, measures the concentration of PM1.0 /...
Index: PLA-17769
Index: PLA-17769
Laser dust/air pollution sensor SDS011 PM2.5 - 5V UART/PWM
The laser dust sensor for the control of air purity. Allows to detect particles with diameter more than 0.3 μm, designed to measure PM2.5 and PM10. It has a fan that sucks the...
Index: SEN-08333
Index: SEN-08333
DSM501A - PM2.5 dust sensor - 5V PWM
Sensor of dust allows you to monitor the purity of the air. It is equipped with a sensor that could detect particles with a diameter above 1 µm, for example, cigarette smoke....
Index: MOD-07560
Index: MOD-07560
Gravity - Air Quality Sensor - SGP40 - DFRobot SEN0394
Air quality sensor manufactured by DFRobot. It has a built-in SGP40 chip (introduced by the well-known Sensirion company), which measures the VOC air quality in the range...
Index: DFR-19375
Index: DFR-19375
Air quality / dust sensor PM1.0 / PM2.5 / PM10 - PMS3003 - 5 V UART
Dust sensor allows monitoring the air quality, measures the PM1.0, PM2,5, PM10 coefficients. Equipped with a sensor that could detect particles with diameter more than...
Index: DNG-13442
Index: DNG-13442
ENS160 + BME280 - sensor for air purity, temperature, humidity and pressure - I2C - DFRobot SEN0335
Multifunctional environmental sensor from DFRobot, which includes two systems: ENS160 , corresponding to the air quality sensor, and BME280 , which is responsible for...
Index: DFR-19026
Index: DFR-19026
BME680 multi-functional 4in1 environmental sensor - SPI / I2C - DFRobot SEN0375
A 4-in-1 MEMS multifunctional environmental sensor manufactured by DFRobot. It features an embedded BME680 chip. The module is a combination of a volatile organic compound...
Index: DFR-19199
Index: DFR-19199
The dust/air quality, temperature, humidity sensor - PMS5003T - DFRobot SEN0233
Multifunctional sensor that not only checks the concentration of PM10, PM2.5 and PM1.0 , but also measures temperature and humidity .
Index: DFR-09532
Index: DFR-09532
Precise device detecting the flammable gases such as natural gas, propane, butane, methane, propanol, ethanol, ammonia, carbon monoxide, gasoline vapors, hydrogen sulfide. It...
Index: BNT-10771
Index: BNT-10771
- Reduced price
- Promotion
Multi Anemometer / windmeter Benetech GM8910 - 6-arm rotor
Multi Anemometer / wind meter is used to measure temperature, humidity, cold sensation, wind, dew point measurement, wind speed, barometric pressure, altitude and...
Index: BNT-19579
Index: BNT-19579
DFRobot Gravity: Formaldehyde (HCHO) Sensor (Arduino & Raspberry Pi Compatible)
The sensor measures the air clarity, depending on the content of formaldehyde. It is characterized by its high stability and sensitivity and long service life. It works with...
Index: DFR-08605
Index: DFR-08605
Gravity - ozone sensor I2C - electrochemical - DFRobot SEN0321
Electrochemical ozone sensor for accurate O3 concentration measurement in the environment. Its measuring range is from 0 ppm to 10 ppm. It communicates via the I2C...
Index: DFR-16575
Index: DFR-16575