Product description: BME680 Multifunctional Environmental Sensor 4in1 - SPI / I2C - DFRobot SEN0375
MultifunctionalMEMS4in1environmental sensor manufactured by DFRobot. It has an embeddedBME680chip. The module is a combination of volatile organic compounds(VOC) sensor,temperaturesensor,humiditysensor andbarometer. It is used as a component forair qualitymonitoring, and is widely used in environmental monitoring, home automation and control, orGPS improvements. The use of MEMS technology and BME680 chip makes the sensor small in size andlow in power consumption. The measuring range for temperature is-40°C to 85°Cwith an accuracy of +/- 1°C; for humidity -0% to 100% RHwith an accuracy of +/- 3% RH; for atmospheric pressure -300 hPa to 1100 hPa with a measurement accuracy of +/- 0.6 hPa.
Product is compatible with Arduino
. Producer prepared detaileduser guideandlibraryfor Arduino IDE environment.
Example of sensor connection usingDFRduinoboard, Arduino equivalent. The board is not a part of kit, you can buy it separately in our shop.
Leads description and example connection diagram
The module hasleadsin the form of solderfields, to which you should solder includedgoldpin connectors. Connect thesensorto the microcontroller module according to the following description:
- VCC- power supply pin within the range from 3.3 V to 5.5 V
- GND- system ground
- SCL- I2C interface clock line
- SDA- I2C interface data line
- 3V3- power supply pin 3,3 V
- CS- Chip Select; selection pi: data / command
Technical specification of BME680 environmental sensor
- Module: Volatile organic compound (VOC), temperature, humidity and barometer sensor
- Embedded chip: BME680
- Technology: MEMS
- Input voltage range: 3.3 V to 5.5 V
- Current consumption: 5 mA (25 mA for VOC measurement)
- Communication interface: I2C bus / SPI
- I2C bus: 3.3 V / 5 V support
- SPI bus: 3.3 V support only
- I2C interface address: 0x76
- Temperature measurement range: from -40°C to 85°C
- Accuracy of measurement: +/- 1°C (from 0°C to 65°C)
- Humidity measurement range: 0% to 100% RH
- Measuring accuracy: +/- 3% RH (ranges from 20% to 80% RH at 25°C)
- Measuring range for atmospheric pressure: 300 hPa to 1100 hPa
- Measuring accuracy: +/- 0.6 hPa (over the range from 300 hPa to 1100 hPa at temperature from 0°C to 65°C)
- IAQ (indoor air quality) range: 0 to 500 ( the higher the score the worse the air quality)
- Module dimensions: 18 x 15.6 mm
Kit contains dedicated goldpin connectors for self-soldering.
Kit contents
- BME680 4in1 environmental sensor
- Goldpin socket strip 1x4 - 2,54 mm pitch
- Goldpin strip 1x6 - 2,54 mm pitch
In our assortment you will also find otherenvironmental sensors. We invite you to familiarize with the offer.