Description
The matrix is composed of 2048 individually addressed RGB LEDs arranged in 32 rows and 64 columns. Each pixel may emit a color from 24-bit palette. The module is controlled by 13 pins of the microcontroller. The distance between the LEDs is 4 mm. The supply voltage is 5 V. The manufacturer recommends using apower supplywith the efficiency no less than 4 A.
|
The matrix can be controlled by using e.g. Raspberry PiorArduino Mega. |
The matrix has two IDC connector enabling cascading of multiple devices. The manufacturer recommends using the device with a large memory RAM and high speed, e.g.Raspberry Pi,Arduino Mega, etc.Arduino will not serve all the functions of the display, and the speed is not sufficient for multiple pieces connected in cascade.
Connection
Connection example with Arduino Mega.
|
The product is compatible with Arduino The manufacturer provides auser manualwith examples connection. |
Specification
- Supply voltage: 5 V
- Average power consumption: 500 W / m2
- Maximum power consumption: 1000 W / m2
- Number of pixels: 2048
- Viewing angle: 160 °
- Synchronous control
- Control mode: scan speed 1/16
- Repeat frequency: at least 60 Hz
- White balance brightness: 1200 CD / m2
- Refresh frequency: not less than 300 Hz
- Pixel pitch: 4 mm
- Included wire
- Module dimensions: 255 x 127 mm
- Thickness: 14 mm
Useful links |
