- Reduced price
- Sale
Weather and air quality meters - Strona 2
Loading...
Module with sensor BME680 from Bosch, it includes measurement of temperature, humidity, pressure and gases. It is able to measure humidity from 10% to 90% RH , pressure from...
Index: ADA-10872
Index: ADA-10872
Grove - dust / purity air sensor PM2.5 PPD42NS - 5V PWM
Sensor of dust allows you to monitor the purity of the air. It is equipped with a sensor that can detect PM 2.5 particles with a diameter above 1 μm, such as cigarette smoke....
Index: SEE-13331
Index: SEE-13331
Grove - Temperature, Humidity, Pressure and Gas Sensor BME680 I2C/SPI
The BME680 sensor module allows you to measure temperature, humidity, pressure and gas simultaneously. The board is equipped with a Grove connector. It communicates via I2C or...
Index: SEE-15330
Index: SEE-15330
Multi Anemometer / windmeter Benetech GM8910 - 6-arm rotor
Multi Anemometer / wind meter is used to measure temperature, humidity, cold sensation, wind, dew point measurement, wind speed, barometric pressure, altitude and...
Index: BNT-19579
Index: BNT-19579
DFRobot Gravity - adapter for the GP2Y1010AU0F dust sensor
Adapter for the direct connection of the sensor GP2Y1010AU0F using the Gravity interface for Arduino without additional modules and the prototype board.
Index: DFR-11282
Index: DFR-11282
Anenometer / windmeter Wintact WT82B - 6-arm disc
Anemometer / wind meter, is used to measure the movement of gases, the speed of air flow. The device has a 6-armed rotor , which begins to rotate as a result of gas flow....
Index: BNT-19578
Index: BNT-19578
Grove - laser dust sensor / air quality PM2.5 (HM3301) - 5V
Grove Laser PM2.5 Sensor (HM3301) is a new generation of the laser sensor of dust / air quality, which in real time, allows for monitoring of air quality. It is e quipped with...
Index: SEE-13812
Index: SEE-13812
Anenometer Uni-T UT363 - 6-arm disc
Anemometer with a 6-arm rotor to measure wind speed. The meter is equipped with a small display on which the measurement results are presented. The wind meter allows you to...
Index: LEC-17477
Index: LEC-17477
Gas sensor SGP30 - VZO / eCO2 - STEMMA QT / Qwiic - Adafruit 3709
SGP30 gas sensor is designed to monitor indoor air quality . It monitors the concentration of volatile organic compounds (VOC ) and H2 present in the air. By measurement...
Index: ADA-19000
Index: ADA-19000
ENS160 + BME280 - sensor for air purity, temperature, humidity and pressure - I2C - DFRobot SEN0335
Multifunctional environmental sensor from DFRobot, which includes two systems: ENS160 , corresponding to the air quality sensor, and BME280 , which is responsible for...
Index: DFR-19026
Index: DFR-19026
Laser sensor of dust /particle concentration PM2.5 - PMS5003
The sensor measures the coefficient of PM2.5, that is, the number of so-called dust suspended in the air. They are contaminants which are harmful to the environment and human...
Index: DFR-03943
Index: DFR-03943
Dust / air quality sensor - PM2,5 PMS1003 - 5V UART
Laser dust sensor that allows you to monitor air purity in real time. It measures PM2.5. The system is powered by 5 V, while the interface works with 3.3 V and communicates...
Index: PLA-14485
Index: PLA-14485
- Reduced price
- SPECIAL OFFERS
Dust / air sensor SPS30 PM1.0 / PM2.5 / PM4 / PM10 - SPS30 - UART/I2C - SparkFun SEN-15103
The dust sensor allows monitoring of air purity and allows measurement of PM1.0, PM2.5, PM4 and PM10 particles. It is equipped with a high quality optical sensor that uses...
Index: SPF-15062
Index: SPF-15062
Fermion - Air Quality Sensor - SGP40 - DFRobot SEN0392
Air quality sensor from DFRobot. The module is equipped with the SGP40 chip produced by a popular company, which is Sensirion. Through the SGP40 system, the module measures...
Index: DFR-19376
Index: DFR-19376
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on the microUSB connector that allows to connect the sensor directly to the computer. The module is...
Index: DNG-13445
Index: DNG-13445
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor - soldered pins
The adapter allows you to transfer the signal from the IDC 10 pin connector to the microUSB connector, this allows you to connect the sensor directly to your computer. The...
Index: ZES-16479
Index: ZES-16479
- Discontinued product
DIY kit for smog sensor - air purity sensor PM2.5 and PM10
The kit allows to build your own meter of smog. The kit includes wi-fi ESP8266 module + NodeMCU v3, the sensor PMS7003, adapter for the PMS sensor, humidity sensor, microUSB...
Index: SES-13434
Index: SES-13434
- Discontinued product
MQ-135 alcohol, benzen, ammonia sensor module - semiconductor - Waveshare 9528
Module with sensor MQ-135 detecting benzene, alcohol and smoke. It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: WSR-05520
Index: WSR-05520
Gravity - BME680 I2C environmental sensor - DFRobot SEN0248
A 4-in-1 MEMS environmental sensor equipped with Gravity connector, manufactured by DFRobot. It features an embedded Bosch BME680 chip. The multifunctional module is a...
Index: DFR-19200
Index: DFR-19200
Anenometer Benetech GM816A - 6-arm disc
Anemometer / wind gauge is used to measure the movement of gases, the flow rate of air. The device has a 6-arm rotor, which, due to the gas flow, begins to rotate....
Index: BNT-10765
Index: BNT-10765
- Discontinued product
Compact Optical Dust Sensor GP2Y1010AU0F
Sensor of dust that allows you to monitor the purity of the air. It is equipped with a sensor with a sensitivity of 0.5 V 0.1 mg/m3, for example, cigarette smoke. The system is...
Index: SEN-08587
Index: SEN-08587
Temperature and humidity meter Uni-T UT333S
Digital temperature and humidity meter is an easy to use measuring device. It is equipped with a function Data HOLD allowing you to freeze the measurement and MIN / MAX...
Index: LEC-19080
Index: LEC-19080