Most electronic devices for correct functioning can be checked very quickly, as soon as all components are soldered and the power supply connected. The LEDs are on, the motors are spinning, the LCD display shows messages - it can be said that everything works as it should, according to the design assumptions. However, the question is - how to make the circuits of our device work correctly in everyday use without a risk of failure? Of course, it is worth ensuring adequate protection of the device against damage by mounting it in the eclosure. The same thing is with the Pi 4B - the latest single-board minicomputer of the Raspberry Pi series, as well as its predecessors. Known with many names - cases, casings, housing and such - all of them with the necessary mounting elements, Raspberry Pi cases available at Botland store are varied in colour, profiling, and other important-to-note parameters. This way you can choose the proper enclosure for the Raspberry Pi, also taking into account the cooling system and the presence of additional hardware extensions.
- New
Linear voltage regulator LDO 1,8V NCP1117DT18G - SMD TO-252 - 5pcs
Index: FAR-15251
- Reduced price
- Promotion
- Reduced price
- Promotion
Contactless electronic thermometer UNI-T UT300R from 32 to 42,9 C
Index: LEC-16652
- On sale!
- Promotion
Gravity - alcohol sensor 0-5ppm - I2C / UART - DFRobot SEN0376
Index: DFR-19016
- Reduced price
- Promotion
Raspberry Pi 4B cases
Loading...
Official case for Raspberry Pi 4B - red-white
Official case for the minicomputer Raspberry Pi version 4B with external dimensions 90 x 60 x 30 mm. The set includes non-slip feet.
Index: RPI-14654
Index: RPI-14654
Fan for Raspberry Pi 4B official case
Fan and cover plate for the official Raspberry PI 4B minicomputer case. It is equipped with 3-pin fan that allows an airflow of 1.4 CFM (40 l/min.) per processor, memory...
Index: RPI-18177
Index: RPI-18177
Official case for Raspberry Pi 4B - graphite
Official case for the minicomputer Raspberry Pi version 4B with external dimensions 90 x 60 x 30 mm. It has adjustable elements, the set also includes non-slip feet.
Index: RPI-14659
Index: RPI-14659
Raspberry Pi 4B justPi aluminium case - copper gold - LT-4B03
Aluminum housing for Raspberry Pi 4B in copper-gold colour. Constructed in such a way that after assembling it acts as a massive heat sink , allowing to effectively cool the...
Index: LON-15108
Index: LON-15108
Case justPi for Raspberry Pi 4B aluminum with dual fan - black - LT-4B02
Made entirely of aluminum black case for Raspberry Pi 4B minicomputer with two fans. The construction of the enclosure makes it one big heatsink, thanks to which after...
Index: LON-15106
Index: LON-15106
justPi case Raspberry Pi 4B aluminum case - black - LT-4B03
Black aluminium housing for Raspberry Pi 4B, which, thanks to its construction, acts as a massive heat sink and allows for effective cooling of the Raspberry and protection...
Index: LON-15107
Index: LON-15107
Raspberry Pi 4B aluminum case - Black
Black case for Raspberry Pi mini-computer version 4B. Easy and quick to install, two-piece , fastened with screws included. All holes fit into the Raspberry Pi 4B. Made of...
Index: DNG-18229
Index: DNG-18229
Case justPi for Raspberry Pi 4B - aluminum with two fans - gray
The Raspberry Pi 4B compatible enclosure is made of grey metal . Includes mounting screws, thermal conductive tapes, 2 fans, case base and top cover. The case has holes for...
Index: DNG-16012
Index: DNG-16012
Raspberry Pi 4 aluminum case - Argon Neo - grey
Aluminium housing in grey for Raspberry Pi 4B. It also acts as a heat sink . The enclosure has an upper cover mounted with a magnet, so you can remove it at any time and use...
Index: ARG-15392
Index: ARG-15392
Case for Raspberry Pi 4B with camera mount - black
Self-assembly product from Gravlaser. Housing consists of six parts and assembly elements. It is designed for Raspberry Pi model 4B minicomputer. It is made of acrylic in...
Index: GRL-20449
Index: GRL-20449
DRP2 - DIN rail mounting for Raspberry Pi 4B/3B+/3B/2B
Plastic board for Raspberry Pi 3 designed to be mounted on a DIN rail. It leaves access to all ports and GPIO pins. External dimensions - 90 x 72 x 25 mm .
Index: BRC-10785
Index: BRC-10785
Case for Raspberry Pi 4B - Multicomp Pro - black
Case for Raspberry Pi 4B minicomputer in black. Made of plastic, it protects the entire surface of RPi from mechanical damage. It is equipped with a removable flap that allows...
Index: FAR-15189
Index: FAR-15189
- On sale!
- Promotion
Case with two fans for Raspberry Pi 4B - aluminium - black - LT-4BA09
Raspberry Pi 4B housing made of durable black aluminium . Durable construction protects minicomputer module against mechanical damage . The upper part of the enclosure...
Index: LON-17934
Index: LON-17934
- On sale!
- Promotion
Fan 5V 30x30x10 mm for Raspberry Pi case
A small 5-volt fan for the Raspberry Pi chassis. It is equipped with a two-pin connector to connect with GPIO Raspberry Pi. It has a low noise level. The fan comes with a...
Index: LON-15056
Index: LON-15056
- On sale!
- Promotion
Case for Raspberry Pi 4B - ABS - black - LT-4A01
Plastic housing for Raspberry Pi 4B in black , matt. It effectively protects the raspberry from damage or accidental short-circuits, while making the minicomputer look...
Index: LON-15164
Index: LON-15164
- On sale!
- Promotion
Pi-Blox case for Raspberry Pi 4B - black - Multicomp Pro MP001209
Housing for Raspberry Pi 4B minicomputer produced by Multicomp Pro. The Pi-Blox series model can be combined with other cases of this type due to LEGO system. Made of...
Index: FAR-18852
Index: FAR-18852
- Reduced price
- Promotion
Case for Raspberry Pi 4B/3B+/3B/2B - transparent open - LT-4B21
Transparent housing for Raspberry Pi mini-computer in 4B, 3B+, 3B, 2B and 1B+ versions. On its upper wall there is space to mount an optional fan. The external dimensions of...
Index: LON-15052
Index: LON-15052
- On sale!
- Promotion
Case for Raspberry Pi 4B - aluminum - blue
The housing is made of durable aluminium painted blue . The design of the case is dedicated for Raspberry Pi 4B minicomputer. Thanks to the use of durable aluminum, the case...
Index: ODS-15692
Index: ODS-15692
Case for Raspberry Pi with 4 IN fan gray, transparent
Grey transparent plastic housing, for Raspberry Pi 4B. Dimensions are 90 x 59 x 27 mm . Fan and screws are included. The enclosure consists of an upper and lower cover...
Index: DNG-16188
Index: DNG-16188
justPi case for Raspberry Pi 4B - aluminum with 2 fans - red
Red aluminium housing , compatible with Raspberry Pi 4B mini-computer design. Thoughtful design and durable construction ensure practical use and very good protection of the...
Index: ODS-15690
Index: ODS-15690
Case for Raspberry Pi 4B - metal - silver - LT-4BA06
Case for Raspberry Pi 4B, metal , in silver . Mounting screws, thermally conductive tapes included. The top cover has a built-in fan and heat sink, the side walls have cut...
Index: LON-15968
Index: LON-15968
- On sale!
- Promotion
Case for Raspberry Pi 4B/3B+/3B/2B - black open - LT-4B21
Black case for Raspberry Pi mini-computer in 4B, 3B+, 3B, 2B and 1B+ versions. The enclosure has a possibility to mount an optional fan on its upper wall. External dimensions...
Index: LON-15053
Index: LON-15053
- On sale!
- Promotion
Raspberry Pi 4B case - ABS - transparent - LT-4A01
Transparent housing for Raspberry Pi 4B minicomputer made of ABS plastic. It provides protection of the raspberry against mechanical damage or short-circuits, adding an...
Index: LON-15165
Index: LON-15165
- On sale!
- Promotion
Case for Raspberry Pi 4B - ABS - black - LT4A06
Black ABS plastic housing, dedicated for Raspberry Pi mini computer. Snap-on mounting is a solid quality of the casing, which protects the minicomputer board from mechanical...
Index: LON-15252
Index: LON-15252
- On sale!
- Promotion
Enclosures for Raspberry Pi 4B - reliable protection and attractive look...in a single enclosure!
For proper protection of Your Raspberry Pi 4B against damage and its use, that is easy and comfortable, you need to choose the enclosure properly for the additional equipment with which your minicomputer will work. Therefore, if you intend to use the Raspberry Pi 4B as a free-standing desktop computer with a keyboard, mouse and monitor, the best choice will be to buy a closed case that has holes for the micro SD card slot, power supply socket, USB, audio, Ethernet and HDMI ports. Such enclosure will also be a good choice for applications in which the computer is permanently mounted. Officially dedicated enclosure for the Raspberry Pi 4B in a closed-form is available in our store in white and red, as well as in black. The housing is made of solid ABS plastic. In the set, the user receives anti-slip rubber pads that ensure the stability of the housing and good adhesion to the surface. On the other hand, if you want to use the Raspberry Pi 4B as a platform for prototyping electronics, then the better choice will be an open housing. This version of the housing provides easy access to GPIO connector, as well as mounting the LCD module and other useful hardware extensions.
Can I install my Raspberry Pi 4B module in the case for older models?
If you want to install your single-board computer in an enclosure, you must pay attention to the device's dimensions and how the connectors and other peripheral elements are arranged. Although the Raspberry Pi 4B has identical PCB dimensions as the models from the 1B, 2B and 3B series, there are differences in the arrangement of the connectors. From here you need to know that the housings for older Raspberry Pi models will not match the specifications of the Pi 4B model. Fortunately, you don't have to worry about this problem. We offer various types of enclosures dedicated to the Raspberry Pi model 4B. The enclosures have been computer designed and manufactured with the utmost care at finest details. The location of the holes is fully compatible with the location of the connectors on the Pi 4B PCB board, which makes mounting the module very easy. Enclosures for Raspberry Pi 4B are characterized by attractive design and provide reliable protection against mechanical and electrical damages. At the same time, please note that the housing for the Raspberry Pi 4B will not fit into the design of older models from the Raspberry Pi series.
Specialized Raspberry Pi housing for non-standard applications
Apart from standard plastic housings, In the Botland store offer, there are available housings equipped with a BLDC-powered fan and metal housings with specially profiled heat sinks for heat dissipation enhancement. This is a particularly interesting option if you are looking for an enclosure specifically for applications working in an environment where the temperature is higher than typical room temperature which is equal to 20°C. On the other hand, the enclosures with VESA mounting bracket with 75mm x 75mm mounting hole spacing, allow the Raspberry Pi 4B to be easily mounted on a wall or rear side of the TV cabinet. Each enclosure set we offer for Raspberry Pi 4B includes screws, latches and other necessary mounting elements.