Li-Ion battery chargers
If your device is powered by replaceable "finger" type lithium-ion batteries , the XTAR VC2 18650 Li-Ion battery charger will be an excellent choice. The device is powered via a micro USB cable (5 V, 1 A) and supports a wide range of batteries, ranging from from size 14500 to 26650. In the upper part of the charger housing there are two independent sockets with adjustable length and a large, multi-segment LCD display with blue backlight. The everActive LC-2100 charger also supports the mentioned size range, but differs from the previously described model both in terms of display design and power supply (12 V, 1.5 A - power supply included). This type of battery charger is a convenient, universal and practical solution.
Chargers for gel batteries
In our store you will also find a number of chargers for gel batteries (used, among others, in cars, motorcycles and UPS power systems). Noteworthy in this group is the microprocessor-based, small everActive CBC-1 charger, which fully automatically charges lead-acid, gel and AGM batteries with a capacity of 1.2 Ah, which is important - both 6-volt and classic ones. 12 V. A universal processor charger supervises the entire charging process, making energy replenishment in the secondary cell effective and, above all, safe. The charging current is automatically adjusted to the current stage.
Another interesting solution is an intelligent charger for VRLA, AGM , VLA, SLA, WET and GEL batteries, marked SBC-61238. This model has a digitally controlled output with a capacity of up to 3.8 A and automatic detection of battery voltage. A significant convenience, rarely found in car chargers, is the built-in LCD display, which provides information about the operating mode and the current battery voltage.
Power management module for embedded systems
It would be a sin not to mention a particularly interesting solution here, also available in this category. It is the DFRobot DFR0580 Solar Power Manager gel battery charger module. The printed circuit board, measuring only 68 x 68 mm, contains DC/DC converters, linear stabilizers and protection systems that provide full control over the charging of the 12-volt gel battery using a DC voltage source in the range of 15-24 V. The module it also provides two USB A ports and 5- and 12-volt outputs for powering additional devices. Although the basic use of the module is to operate photovoltaic panels, it can also function as a buffer power supply (UPS), e.g. for Raspberry Pi.
In the Botland store you will find the best battery chargers available on the market, equipped with, among others: a practical reverse polarity protection function, as well as models equipped with independent charging channels and LEDs indicating the operating status. In addition, selected battery chargers have a built-in micro USB port, charger filters, and the supported sizes (battery capacities) guarantee universal use. Botland store - fast delivery and professional advice. We encourage you to contact us by phone, e-mail or via the form available on the website.
Battery and accumulator chargers - FAQ