- On sale!
- Promotion
Stick series
Embedded computing systems have been one of the most developing branches of electronics and programming in recent years. This is inseparable from the popularity of such modules as BeagleBone, Arduino or Raspberry Pi. Comprehensive hardware and software equipment allows to build and program countless embedded applications. A novelty in this area are M5Stick modules from M5Stack series, which allow to build, among others, a robot, weather station, as well as to prototype other new applications at will.
Products: 19
Loading...
M5StickC Plus - IoT development module - ESP32-PICO
The M5StickC Plus based on the ESP32-PICO-D4 is equipped with the larger M5StackC display. The Plus version uses a 1.14" colour display, as well as its smaller screen...
Index: MSS-17988
Index: MSS-17988
An overlay for the M5StickC and M5StickC Plus modules that combines two SHT30 and BMP280 sensors. The overlay uses a GPIO connector to connect to the module, which is...
Index: MSS-19835
Index: MSS-19835
Overlay with built-in ES9251II servo for Stick series modules. The range of servo movements is 145° and can be controlled using PWM signals. The servo has a plastic gearbox...
Index: MSS-18043
Index: MSS-18043
- Reduced price
- Promotion
M5Stick Proto - prototyping hat
GPIO connector leadout for M5Stick modules for universal prototyping board. Allows you to create your own custom circuits according to our design without worrying about...
Index: MSS-18051
Index: MSS-18051
A small cap from the Stick series allowing to implement a speaker for the M5StickC and M5StickC Plus development modules. The cap is equipped with PAM8303 amplifier. It...
Index: MSS-18052
Index: MSS-18052
M5StickC PLUS - IoT development module - ESP32-PICO + watch accessories
M5StickC PLUS - a development module from M5Stack based on the ESP32-PICO-D4 chip , enhanced with Bluetooth 4.2 and WiFi communication and equipped with a 1.14'' color LCD...
Index: MSS-20527
Index: MSS-20527
M5StickC HAT - DLIGHT Ambient Light Sensor - BH1750FVI-TR
Digital ambient light sensor in the form of a HAT overlay for the M5StickC / M5StickC Plus development module. The sensor manufactured by the M5Stack company was equipped with...
Index: MSS-20881
Index: MSS-20881
M5StickC 8-Channel Servo Driver hat V1.1 - M5Stack U076-B
M5Stack hat for the M5StickC and M5StickC Plus development modules. It has a built-in STM32F030F4 system, thanks to which it allows you to control up to 8 servos at the same...
Index: MSS-21273
Index: MSS-21273
BalaC Plus ESP32 self-balancing Robot Kit M5Stack K038-B
The BalaC Plus ESP32 is a two-wheeled, self-balancing robot. The set is great for learning the basics of programming while having fun.
Index: MSS-21651
Index: MSS-21651
M5Stick ADC Hat - equivalent ADC - ADS1100
The ADC Hat is a M5StickC converter based on the ADC ADS1100 chip, which is a 16-bit , self-calibrating delta-cd A/C converter - sigma . Connecting the cap to the...
Index: MSS-18048
Index: MSS-18048
- Reduced price
- Promotion
The C-Back Driver HAT is an extension for the M5StickC and M5StickC Plus. It is based on the STM32F030F4P6 chip, which allows to control the operation of up to 4 servos via...
Index: MSS-19422
Index: MSS-19422
- Reduced price
- Promotion
M5Stick ToF Hat - laser distance sensor
Laser distance sensor in the form of ToF Hat overlay, dedicated to the M5StickC module series. The integrated overlay combines two components: VL53L0X and 940nm VCSEL...
Index: MSS-18046
Index: MSS-18046
M5Stick JoyC - joystick hat for remote control
JoyC is an overlay to turn our M5StickC into a remote control module . The system is responsible for the correct operation of the device. STM32F030F4 . The I2C...
Index: MSS-18039
Index: MSS-18039
M5StickC Yun Hat - atmospheric measurement station
Overlay to create a measuring station based on the M5StickC module. The overlay is equipped with a temperature and humidity sensor. SHT20 air pressure sensor BMP280...
Index: MSS-18047
Index: MSS-18047
- Reduced price
- Promotion
M5Stick DAC HAT - digital-to-analogue converter
Digital-to-Analogue converter as a cap dedicated for M5StickC series products. The module is equipped with energy-saving, efficient DAC MCP4725. Single-channel converter...
Index: MSS-18050
Index: MSS-18050
- On sale!
M5Stack 1865C hat - powerbank for M5Stick development modules
Powerbank to charge the M5StickC module wherever you are. The device includes Li-Ion 18650 batteries with a capacity of 2200 mAh. This battery can be replaced at any...
Index: MSS-18010
Index: MSS-18010
M5Stick Joystick - joystick hat
Joystick overlay dedicated for M5StickC and M5StickC Plus modules . The overlay is equipped with STM32F030F4 chip . It uses an I2C interface to communicate...
Index: MSS-18045
Index: MSS-18045
M5Stack RoverC Pro - robot platform with wheels and gripper
RoverC Pro is a programmable robot platform compatible with M5StickC and M5StickC Plus modules. The main controller of the platform is STM32F030C6T6 . The platform is...
Index: MSS-18102
Index: MSS-18102
M5Stick Thermal Camera - thermal camera hat
Thermal Hat overlay for the implementation of thermal imaging into the M5StickC module. The overlay is equipped with the MLX90640 sensor, which monitors the surface...
Index: MSS-18110
Index: MSS-18110
Precise distance measurement with ToF HAT sensor
The Stick series includes, among others, ToF HAT - laser distance sensor. The measurement consists of emitting a laser beam with a wavelength of 940 nm. This sensor is characterized by high quality of workmanship and high measurement accuracy combined with a very short time of detection of delay resulting from the time of propagation of the laser beam. The maximum range of measurement of the absolute distance of this sensor is 2 m. The main element of this sensor's construction is the VL53L0X, which generates a laser beam invisible to the human eye, based on FlightSense technology. Built-in infrared filters enable precise beam guidance and increase resistance to interference, guaranteeing high measurement accuracy. The module is compatible with Arduino boards and communicates on I2C bus (address: 0x29). ToF HAT module is perfect for applications such as obstacle recognition, gesture recognition, precise distance measurement, as well as for camera and camera support.
M5StickC - development board based on ESP32
The M5Stick products are also versatile tools for IoT application prototyping enthusiasts. One example is the M5StickC board, which is based on the ESP32 series CPU. With this module you can use your creativity to a very high degree, creating prototypes of IoT applications in a very short time with a minimum of complexity. To turn the board on, press and hold the power button for 2 seconds. The board supports several data transmission speeds, from 250k to 115200 k. The M5StickC design is equipped with an infrared transmitter, a 6-axis inertial navigation system and a microphone. The M5StickC module is used in a wide range of IoT applications as a controller for intelligent clothing (e.g. by measuring the permitted safe height for workers on the construction site) and also as a scientific and teaching aid when conducting classes according to the STEAM philosophy. The board can be powered from the USB type C port as well as from the built-in lithium-polymer battery.
Intelligent M5Stick cameras
The M5Stick series also includes the intelligent MStickV AI camera, which is designed to create advanced designs for the internet of things and artificial intelligence. The camera uses a specialized Kendryte K210 chip, which consists of a 64-bit RISC-V processor and a neural computing processor. The OmniVision OV7740 image sensor provides excellent image quality, even under very poor ambient lighting conditions, and enables precise measurement of the detected target's coordinates. The camera is powered by a built-in 200 mAh lithium-polymer battery. Examples of applications where the M5StickV AI camera is used include FPP game simulators, image analysis and face recognition systems, as well as identification of physical objects.