Limit sensors for 3D printers are distinguished not only by high precision of operation, but also by reliability. Their task is to detect the extreme position of moving elements and stop them in a safe place. Limit sensors for 3D printers also allow you to detect the extreme position of the X, Y and Z axes. The assortment in this category includes a wide selection of limit sensors, e.g. for Creality, RepRap and other printers.
Limit switch - endstop - for 3D printers - Creality
A limit switch (Endstop) is a component used in 3D printers to stop moving parts of the system - such as carriage or table movements. It also detects when the X, Y or Z axes...
Optical Limit Sensor Endstop Reprap 3D Ramps 1.4
Optical, slit end sensor dedicated to RapRap 3D printers. The module has three outputs and connects to the Ramps 1.4 controller via the included cable.
3D printer CR-200B limit switch
Limit switch module used in Creality CR-200B 3D printer. The product consists of the actual limit sensor and plug - soldered into the board . It is an original printer...Limit switches, also called endstops, are components used in 3D printers to safely stop moving parts. A good example is a workbench. In addition, limit switches are designed to immediately detect a situation in which the Y, X and Z axes are in extreme connections, i.e. maximum and minimum settings. Selected models of limit switches available in the assortment of our store are equipped with a special lever, the main task of which is to increase the distance used to safely brake the moving elements of the 3D printer. In addition, this type of solution guarantees a margin of error, and thus improves the safety of using 3D printers. The lack of limit sensors in 3D printers can lead not only to damage to the movable or stationary elements of the device, but also to devices located in the immediate vicinity of the equipment.
In this category you can find original spare parts for 3D printers in the form of limit sensors (also called limit switches). The choice of original spare parts is not only a guarantee of full compatibility, but also reliability and long life. Selected limit sensors available in this section are equipped with a socket, thanks to which connecting these components to the motherboard is not a problem. Sensors with wires for connection are also available.
Before choosing a limit sensor, check compatibility with your 3D printer. If you have any questions or doubts, please contact our advisors via the contact form, by e-mail or by phone.
